|
|
|
|
Thread Tools | Display Modes |
12-01-2021, 12:52 PM | #1 |
Scooby Newbie
Member#: 527704
Join Date: Nov 2021
Location: MI
Vehicle:2003 Baja Yellow |
Baja sport lights, suggestions needed!
Recently picked up an 03 Baja and would love to have the sport activity light kit on it. Unfortunately, I can't find a kit anywhere (not terribly surprising). So does anyone know of a similar kit that is around today? One thing i need if i go after market is the stone covers that say baja on them, thats a great look to me. So any ideas on lights/kits/stone guards would be welcome.
* Registered users of the site do not see these ads.
|
12-05-2021, 07:30 PM | #2 | |
Scooby Newbie
Member#: 466854
Join Date: Apr 2017
|
Quote:
The Lights are Hella 500's p/n 005750952, you can epoxy the inside of the covers and sand down the raised Hella 500 and apply decals. The Switch is obsolete, I was told the Fog switch will work if you remove the locater pin, I have not tried this. The relay is available 82501AE03A for the '04-06, RY-51 for the '03 I am working on reproducing the brackets and the harness's that go from behind the 3rd brake light to the Sport Activity Lights. '03's may or may not be pre wired, first things to look for is the switch plug that is supposed to be taped up by the radio and the 4 pin connector behind the 3rd brake light Last edited by Leon in PA; 12-12-2021 at 08:00 AM. |
|
12-12-2021, 01:20 AM | #3 | |
Scooby Newbie
Member#: 527704
Join Date: Nov 2021
Location: MI
Vehicle:2003 Baja Yellow |
Quote:
Mines a '03 so I am not quite sure if the relays match up. The reproduction of the brackets would be sweet, haven't found a good source on what they look like to try and make one myself. |
|
12-12-2021, 07:49 AM | #4 | |
Scooby Newbie
Member#: 466854
Join Date: Apr 2017
|
Quote:
IF it is pre-wired I can make up the 2 harness's for the roof. Big pain is getting to the plug behind the 3rd brake light. The install manual states to remove the right side bed rail, pillar trim, and 3rd brake light trim. May be able get to it by removing the interior trim pieces if your 3rd brake light is notched, it may or may not be. This is a problem because the round trim clips will break, they are available on ebay 3d printed. The square bolt covers up top sometimes break too, they are only available from salvage yards. 2003 install Manual http://www.scoobytruck.com/pdf/2003M...Lamp_rev_B.pdf Link to pictures https://www.flickr.com/photos/324792...57720232198011 Last edited by Leon in PA; 12-12-2021 at 07:57 AM. |
|
04-20-2024, 08:31 AM | #5 |
Scooby Newbie
Member#: 466854
Join Date: Apr 2017
|
Did you get anywhere with installing Sport Activity Lights? I have brackets listed on ebay
|
Thread Tools | |
Display Modes | |
|
|