93-01 impreza's, part # for the alumanium hood

soslow · 01-19-2006, 10:30 AM

I don't know if this is common knowledge or not but I had a little difficulty finding this. My subaru dealer wouldn't find the part number for the alumanium hood. BUT any subaru dealer can order the hood if you give them the part number so here it is: Part Number 57220FA130
this will come in their system as the Aluminium alloy hood. So if you've been wanting one you can order through your local subie dealer and avoid having tho pay shipping/freight charges if you don't mind waiting for it to come with their regular shipment (you shouldn't have to wait more than 2 weeks, hopefully) Its abou the same price as a decent CF hood, I paid $580 for mine through the dealer.

* Registered users of the site do not see these ads.

linsavy · 01-19-2006, 01:24 PM

Do know the exact weights of the stock and the alloy hoods? I wonder how much savings there is.

Siper2 · 01-19-2006, 01:44 PM

About 30 lbs. in weight savings:

http://www.scoobymods.com/forums/showthread.php?t=81

www.rallispec.com (ask for Dave) carries them, they're just not listed on the site anymore.

=S2=

Siper2 · 01-19-2006, 01:45 PM

Oh, sorry but I don't know the PN. Drop a line to Peaty at Scoobymods, he may know.

Or North Ursalia will know. Check the part numbers on www.northursalia.com and if it isn't there, Email him (his name is Brian).

=S2=

linsavy · 01-19-2006, 04:21 PM

Thanks. That's a good bit of weight, but still about $33/lb to get it.

soslow · 01-20-2006, 12:27 AM

according to Renick subaru/motorsprts the stock (steel) hood weighs 34 lbs. The alumanium hood weighs in @ or under 15 lbs.
that works out to a 19lb. weight savings at a cost of $14.26 per pound over the cost of the steel hood (I have to replace my hood anyway....d*** deer

) if your just upgrading for the heck of it it comes up at $30.53 per pound.

KevinHeist · 01-20-2006, 12:30 AM

mine's hanging in my garage waiting for me to get un-lazy and get it painted. (along with my front bumper and fenders)

Subie Gal · 01-20-2006, 09:30 AM

mine is installed

Jamie

linsavy · 01-20-2006, 04:18 PM

If you include paint and are just upgrading for the heck of it, it is $53/lb. Time to go workout. I'd be pretty svelt at 19lbs lighter.

soslow · 01-20-2006, 06:14 PM

mine is en route!

by the way, how much should I expect to pay for a paint job??

Subie Gal · 01-21-2006, 10:06 AM

$200+ for a good paint job blended into the fenders... etc.

Jamie

01-19-2006, 10:30 AM	#1
soslow Scooby Specialist Member#: 95027 Join Date: Sep 2005 Chapter/Region: MAIC	93-01 impreza's, part # for the alumanium hood I don't know if this is common knowledge or not but I had a little difficulty finding this. My subaru dealer wouldn't find the part number for the alumanium hood. BUT any subaru dealer can order the hood if you give them the part number so here it is: Part Number 57220FA130 this will come in their system as the Aluminium alloy hood. So if you've been wanting one you can order through your local subie dealer and avoid having tho pay shipping/freight charges if you don't mind waiting for it to come with their regular shipment (you shouldn't have to wait more than 2 weeks, hopefully) Its abou the same price as a decent CF hood, I paid $580 for mine through the dealer. * Registered users of the site do not see these ads.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Whats the part # for the rain gard?	White Knight	Legacy Forum	16	08-24-2001 11:50 AM
Anyone know the part # for the MBC from Grainger????	Scooby South	Factory 2.0L Turbo Powertrain (EJ Series Factory 2.0L Turbo)	3	05-04-2001 05:39 AM
Does anyone know the new part # for the amsoil air filter?	Robmat	Normally Aspirated Powertrain	2	05-03-2001 10:57 AM
Does anyone know the part # for the secondary air filter box gasket for a '99	dandbest	Technical Forum Archive	4	07-16-2000 02:08 PM

01-19-2006, 01:24 PM	#2
linsavy Scooby Specialist Member#: 11620 Join Date: Oct 2001 Location: Ontario Vehicle: 1997 GF4-STiV3 clone	Do know the exact weights of the stock and the alloy hoods? I wonder how much savings there is.

01-19-2006, 01:44 PM	#3
Siper2 Scooby Guru Member#: 1134 Join Date: Mar 2000 Chapter/Region: MAIC Location: Mechanicsburg, PA Vehicle: 2015 Outback H-6 White	About 30 lbs. in weight savings: http://www.scoobymods.com/forums/showthread.php?t=81 www.rallispec.com (ask for Dave) carries them, they're just not listed on the site anymore. =S2=

01-19-2006, 01:45 PM	#4
Siper2 Scooby Guru Member#: 1134 Join Date: Mar 2000 Chapter/Region: MAIC Location: Mechanicsburg, PA Vehicle: 2015 Outback H-6 White	Oh, sorry but I don't know the PN. Drop a line to Peaty at Scoobymods, he may know. Or North Ursalia will know. Check the part numbers on www.northursalia.com and if it isn't there, Email him (his name is Brian). =S2=

01-19-2006, 04:21 PM	#5
linsavy Scooby Specialist Member#: 11620 Join Date: Oct 2001 Location: Ontario Vehicle: 1997 GF4-STiV3 clone	Thanks. That's a good bit of weight, but still about $33/lb to get it.

01-20-2006, 12:27 AM	#6
soslow Scooby Specialist Member#: 95027 Join Date: Sep 2005 Chapter/Region: MAIC	according to Renick subaru/motorsprts the stock (steel) hood weighs 34 lbs. The alumanium hood weighs in @ or under 15 lbs. that works out to a 19lb. weight savings at a cost of $14.26 per pound over the cost of the steel hood (I have to replace my hood anyway....d*** deer ) if your just upgrading for the heck of it it comes up at $30.53 per pound.

01-20-2006, 12:30 AM	#7
KevinHeist Scooby Guru Member#: 50667 Join Date: Dec 2003 Chapter/Region: TXIC Location: Dallas/Plano, TX Vehicle: 2000 Impreza Coupe Enginuity Tuned	mine's hanging in my garage waiting for me to get un-lazy and get it painted. (along with my front bumper and fenders)

01-20-2006, 09:30 AM	#8
Subie Gal GC84Ever Super Moderator Member#: 301 Join Date: Sep 1999 Chapter/Region: NWIC Location: WA Vehicle: 1970 FF-1 & '70 Van 02 WRX/01 RS	mine is installed Jamie

01-20-2006, 04:18 PM	#9
linsavy Scooby Specialist Member#: 11620 Join Date: Oct 2001 Location: Ontario Vehicle: 1997 GF4-STiV3 clone	If you include paint and are just upgrading for the heck of it, it is $53/lb. Time to go workout. I'd be pretty svelt at 19lbs lighter.

01-20-2006, 06:14 PM	#10
soslow Scooby Specialist Member#: 95027 Join Date: Sep 2005 Chapter/Region: MAIC	mine is en route! by the way, how much should I expect to pay for a paint job??

01-21-2006, 10:06 AM	#11
Subie Gal GC84Ever Super Moderator Member#: 301 Join Date: Sep 1999 Chapter/Region: NWIC Location: WA Vehicle: 1970 FF-1 & '70 Van 02 WRX/01 RS	$200+ for a good paint job blended into the fenders... etc. Jamie