Aetherfury Video - Nameless Performance Axleback Installed in 2011 Sedan

Aetherfury · 07-15-2011, 10:26 AM

I figured I would post this over here too since I haven't seen a lot of sound clips for Nameless Performance. Of course what post of mine would be complete without a completely overdone video!

I am going to do the mid-pipe next to see the sound difference and then I think I'll be buying their downpipe when they release it. I like the way they are doing the "piece your exhaust together thing" since I have a toddler which means I don't have much money any more haha.

Super easy install, I didn't even need to jack up the car because of the ground clearance in the back. Four bolts, four hangers.

As others have said- I think it's a good idea to get two new gaskets since they are only a few bucks each and my stock ones were destroyed just from 7,000 miles. I didn't get new bolts, and I don't think they are necessary.

I chose quad staggered double-walled tips and flush with the bumper.

Sound clips in the video, of course recorded doesn't do it justice vs in person.

‪Nameless Performance Axleback Installed on 2011 STi Sedan‬&rlm; - YouTube

Here is the reason I have to buy my exhaust in three separate pieces (but I guess she's worth it haha) rocking out her new Recaro seat:

But on to the exhaust photos

* Registered users of the site do not see these ads.

hakira · 07-15-2011, 10:48 AM

hah nice job

hows the cabin sound when cruising around 70-80?

Decipher · 07-15-2011, 11:12 AM

Your videos are epic! I still watch your intake video just for a laugh. Nicely done again!

Ying · 07-15-2011, 11:20 AM

That video is great. Legs FTW.

06AWD · 07-15-2011, 12:05 PM

Awesome video. Any other mods on your car?

Aetherfury · 07-15-2011, 12:22 PM

Thanks guys!

06AWD- I just have the axleback, accessport and the sf intake for performance stuff. Running the cobb stage 1+SF 93 oct map.

Hakira- The drone (for me and my wife) is better than the stock. Now real low bass frequencies bother me, so that is why I think it drones less than stock. It is louder, but not as annoying.

marcmtb35 · 07-15-2011, 01:08 PM

That video is awesome. Well done sir!

06AWD · 07-15-2011, 01:27 PM

Quote:

Originally Posted by Aetherfury

Thanks guys!

06AWD- I just have the axleback, accessport and the sf intake for performance stuff. Running the cobb stage 1+SF 93 oct map.

Ah, that's what I was hearing. How does the car feel running Stage 1? The axle back (cat-back when it's ready) and that map, are what I plan to do before the end of the summer.

Decipher · 07-15-2011, 02:47 PM

^ I have a full 3" CBE and running the AEM CAI, and I can tell you the Stage 1+ map on 93 Octane is INSANE. It is a totally different car and a must-have. Do it!!!

06AWD · 07-15-2011, 04:41 PM

I have been reading that the OTS stage 1 map from Cobb has fairly substantial increases for the 2011 compared to previous years. I can tell you that while I felt a small improvement in performance on my 2006 WRX at stage 1, it was nothing to write home about. Wasn't really happy until I went stage 2. I'm looking forward to seeing and feeling the differences on my 2011.

Decipher · 07-15-2011, 05:37 PM

I'm dying to go stage 2, but the difference is really minimal so I'm staying stage 1+ aem for now. You will be totally blown away.

End thread jack :-) but seriously...check out the SF intake video if you haven't seen it yet. So sweet.

slimfit · 07-15-2011, 06:38 PM

Great follow up to the first video!! Sounds great especially with the Cobb intake.

eronenris · 07-15-2011, 06:53 PM

is it possible for this to fit an 09 wrx sedan? its gorgeous and i want it.

Midevil · 07-17-2011, 12:21 PM

Quote:

Originally Posted by eronenris

is it possible for this to fit an 09 wrx sedan? its gorgeous and i want it.

You will need to cut your rear valence to fit the quad tip exhaust.

Aetherfury · 07-18-2011, 11:41 AM

Yeah Midevil is right. iirc the 2009 had smaller cutouts in the bumper but you could bug Jason @ Nameless and see if he will just weld tips that would fit onto the pipes, or see if they are developing for your car.

NamelessPerformance · 07-19-2011, 06:15 PM

Quote:

Originally Posted by eronenris

is it possible for this to fit an 09 wrx sedan? its gorgeous and i want it.

We actually have a product for the 2008-2010 WRX Sedan that is very similar to these, it features a double wall, straight cut set of tips that fit well in the rear valance of the 2008-2010. We make these tips in house by hand, and they are entirely tig welded from T304 Stainless:

They are also $299/pair, but can only be ordered over the phone right now. Our website is going through a major overhaul and all of our new products are going to be on it when it is launched.

Until then we can be contacted at: 360.263.5001 or at [email protected]

We also have a hatch catback available now, plus a sedan midpipe, muffled sedan midpipe and divorced downpipe in the works - each of these are about 1-3 weeks out at this point, all prototyping and dyno runs have been done, etc.

Jason

rbp4k4 · 12-15-2011, 12:07 PM

Did you use your old gaskets when installing your exhaust?

CO11WRX · 12-15-2011, 04:37 PM

Quote:

Originally Posted by rbp4k4

Did you use your old gaskets when installing your exhaust?

I believe he mentioned he purchased new ones, but I would also like to know: if you ordered the gaskets online, would you mind posting a link? I just ordered the NP axleback and did not even think about replacing the gaskets (I'm 100% new to the mods game)

ah2049 · 12-15-2011, 06:03 PM

Quote:

Originally Posted by rbp4k4

Did you use your old gaskets when installing your exhaust?

When I installed mine, I reused the old gaskets. I only had about 5000 miles on the car, so they came off clean when I pulled off the stock axleback.

07-15-2011, 12:22 PM	#6
Aetherfury Scooby Newbie Member Sales Rating: (0) Member#: 242330 Join Date: Mar 2010 Chapter/Region: MAIC Location: Northern VA Vehicle: 2011 STi Sedan SWP	Thanks guys! 06AWD- I just have the axleback, accessport and the sf intake for performance stuff. Running the cobb stage 1+SF 93 oct map. Hakira- The drone (for me and my wife) is better than the stock. Now real low bass frequencies bother me, so that is why I think it drones less than stock. It is louder, but not as annoying. Last edited by Aetherfury; 07-15-2011 at 12:35 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS : Nameless Performance Axle Back Exhaust 2011 STi WRX sedan 08+	T-WREXXX	Engine/Power/Exhaust	26	09-29-2011 07:34 AM
2011 WRX Hatch Exhaust - Nameless Performance	BretCutler	Factory 2.5L Turbo Powertrain (EJ Series Factory 2.5L Turbo)	15	05-25-2011 04:07 PM
FS : Nameless Performance Axleback WRX/STI Sedan	Decipher	MWSOC Private Classifieds	11	05-21-2011 04:33 PM
FS : Nameless Performance Axleback Exhaust WRX/STI Sedan	Decipher	Engine/Power/Exhaust	14	05-21-2011 04:32 PM
Where to run power wire in 2011 sedan	wichitalegacy	Car Audio, Video & Security	8	03-20-2011 12:38 PM

07-15-2011, 10:48 AM	#2
hakira Scooby Specialist Member Sales Rating: (9) Member#: 74211 Join Date: Nov 2004 Location: 3°4′33″S 37°21 Vehicle: 2011 SSM WRX 4DR	hah nice job hows the cabin sound when cruising around 70-80?

07-15-2011, 11:12 AM	#3
Decipher Scooby Specialist Member Sales Rating: (11) Member#: 262760 Join Date: Nov 2010 Chapter/Region: MWSOC Location: Lake in the Hills, ILLnoise Vehicle: 2011 WRX Hatch Limtd Satin White Pearl	Your videos are epic! I still watch your intake video just for a laugh. Nicely done again!

07-15-2011, 11:20 AM	#4
Ying Scooby Newbie Member Sales Rating: (2) Member#: 166490 Join Date: Dec 2007 Chapter/Region: Tri-State Location: Harrisburg, PA Vehicle: 2011 WRX WRB	That video is great. Legs FTW.

07-15-2011, 12:05 PM	#5
06AWD Scooby Specialist Member Sales Rating: (5) Member#: 112843 Join Date: Apr 2006 Chapter/Region: Tri-State Location: NJ Vehicle: 2011 SWP STI Sedan Speedline/RCE/Cobb	Awesome video. Any other mods on your car?

07-15-2011, 01:08 PM	#7
marcmtb35 Scooby Specialist Member Sales Rating: (0) Member#: 171151 Join Date: Feb 2008 Chapter/Region: MAIC Location: Patapsco State Park Vehicle: 2012 JK COD MW3 Silver	That video is awesome. Well done sir!

07-15-2011, 02:47 PM	#9
Decipher Scooby Specialist Member Sales Rating: (11) Member#: 262760 Join Date: Nov 2010 Chapter/Region: MWSOC Location: Lake in the Hills, ILLnoise Vehicle: 2011 WRX Hatch Limtd Satin White Pearl	^ I have a full 3" CBE and running the AEM CAI, and I can tell you the Stage 1+ map on 93 Octane is INSANE. It is a totally different car and a must-have. Do it!!!

07-15-2011, 04:41 PM	#10
06AWD Scooby Specialist Member Sales Rating: (5) Member#: 112843 Join Date: Apr 2006 Chapter/Region: Tri-State Location: NJ Vehicle: 2011 SWP STI Sedan Speedline/RCE/Cobb	I have been reading that the OTS stage 1 map from Cobb has fairly substantial increases for the 2011 compared to previous years. I can tell you that while I felt a small improvement in performance on my 2006 WRX at stage 1, it was nothing to write home about. Wasn't really happy until I went stage 2. I'm looking forward to seeing and feeling the differences on my 2011.

07-15-2011, 05:37 PM	#11
Decipher Scooby Specialist Member Sales Rating: (11) Member#: 262760 Join Date: Nov 2010 Chapter/Region: MWSOC Location: Lake in the Hills, ILLnoise Vehicle: 2011 WRX Hatch Limtd Satin White Pearl	I'm dying to go stage 2, but the difference is really minimal so I'm staying stage 1+ aem for now. You will be totally blown away. End thread jack :-) but seriously...check out the SF intake video if you haven't seen it yet. So sweet.

07-15-2011, 06:38 PM	#12
slimfit Scooby Newbie Member Sales Rating: (0) Member#: 90597 Join Date: Jul 2005 Chapter/Region: Tri-State Location: DELCO, PA Vehicle: 2011 WRX Premium SWP	Great follow up to the first video!! Sounds great especially with the Cobb intake.

07-15-2011, 06:53 PM	#13
eronenris Scooby Newbie Member Sales Rating: (0) Member#: 262992 Join Date: Nov 2010 Chapter/Region: NWIC Location: Utah Vehicle: 2009 WRX - Stage 2 Satin White Pearl	is it possible for this to fit an 09 wrx sedan? its gorgeous and i want it.

07-18-2011, 11:41 AM	#15
Aetherfury Scooby Newbie Member Sales Rating: (0) Member#: 242330 Join Date: Mar 2010 Chapter/Region: MAIC Location: Northern VA Vehicle: 2011 STi Sedan SWP	Yeah Midevil is right. iirc the 2009 had smaller cutouts in the bumper but you could bug Jason @ Nameless and see if he will just weld tips that would fit onto the pipes, or see if they are developing for your car.

12-15-2011, 12:07 PM	#17
rbp4k4 Scooby Newbie Member Sales Rating: (0) Member#: 296838 Join Date: Oct 2011 Vehicle: 2010 WRX Satin White Pearl	Did you use your old gaskets when installing your exhaust?