Process west TMIC 08+ WRX Install Install Instructions - Page 7

cusch94 · 02-05-2019, 02:34 AM

Quote:

Originally Posted by Subaru_junkie

I know this thread is old, but looking for info. Vendors for this particular tmic seem to be nonexistent online now, and I bought one used, but it didn't include any of the hardware(bolts) for installation. Can anyone tell me the specification for the bolts(length/thread pitch/etc.) So I can just source some locally? Thanks.

I've contacted Process West directly for this information as I am in the same situation. This was their response;

1 x M8 bolt 12mm long
4 x M6 phillips head screws 10mm long
2 x M6 bolts 10mm long
6 x M6 flange nuts

* Registered users of the site do not see these ads.

Homemade WRX · 02-05-2019, 06:58 AM

Quote:

Originally Posted by cusch94

I've contacted Process West directly for this information as I am in the same situation. This was their response;

1 x M8 bolt 12mm long
4 x M6 phillips head screws 10mm long
2 x M6 bolts 10mm long
6 x M6 flange nuts

I love how they left thread pitch off of all hardware. Clearly wasn't the engineer responding

NavyChiefTee · 03-12-2019, 12:08 PM

Delete

REX_WGN · 09-17-2021, 04:21 PM

For anyone still getting updates about this thread, I'm looking to buy or borrow your underneath bracket so I can fabricate my own. I have this IC on my 09 FXT but it's missing the underneath bracket and it costs and arm and a leg to get one from an Australian vendor.

If you have it and willing to let me borrow it, please let me know. I am willing to pay as well as offer some car parts I have. Check out my iTrader feedback for my rep.

03-12-2019, 12:08 PM	#153
NavyChiefTee Scooby Newbie Member#: 494821 Join Date: Dec 2018	Process west TMIC 08+ WRX Install Install Instructions Delete Last edited by NavyChiefTee; 04-04-2019 at 12:18 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-17-2021, 04:21 PM	#154
REX_WGN Scooby Guru Member#: 107618 Join Date: Feb 2006 Chapter/Region: Tri-State Location: NY Vehicle: 06 GG WRX / 09 FXT @florencedestinedfxt	For anyone still getting updates about this thread, I'm looking to buy or borrow your underneath bracket so I can fabricate my own. I have this IC on my 09 FXT but it's missing the underneath bracket and it costs and arm and a leg to get one from an Australian vendor. If you have it and willing to let me borrow it, please let me know. I am willing to pay as well as offer some car parts I have. Check out my iTrader feedback for my rep.