BOV to Perrin inlet hose... where to find one?

[FAFWrx]

As the title states, been trying to find one for a while now. I know samco used to make one but when I called they didn’t know what I was talking about - lol.

If someone has a part number or a link to buy one that would be much appreciated. 2012 WRX

Thanks again!!!

[Haevn]

Here it is https://parts.augustasubarudealer.co...4465AA100.html

[FAFWrx]

Awesome thanks bud!!

Any aftermarket/ full silicone ones out there?

[Newtf126]

Hi I'm new to the forums and I too am trying to find a few parts I'm building a 08 wrx sedan
Currently I had crank nitrated installed king bearings Manley forged rods and pistons block was milled head was milled valves redone injectors professional cleaned and flow tested (subi blue tops) it had stock tdo4L turbo and stock intercooler but I swapped out intake for a 09 sti intake a brand new vf 48 turbo and a process West black tmic it was a lot of work to swap and I don't want it to look trashy so I need to find the hoses to go from my Perrin bov to my Perrin sti inlet boot as well as pcv hoses Thanks in advanced Oh I also did a tgv delete and egr delete

[Jedi03]

I have 2 of the stock hoses if that will work!

[Newtf126]

Stock sti hoses

[Newtf126]

Originally Posted by Jedi03

I have 2 of the stock hoses if that will work!

I’m not sure if they would or not without seeing them

[FAFWrx]

After some time searching I found a radiator hose from Gates that’s 28mm ID and 23” long. It’s flex looking hose but the fit seems about perfect.

https://www.gates.com/us/en/fluid-po...0/v/4254-00050

[IMG][/IMG]