|
|
|
|
Thread Tools | Display Modes |
|
04-02-2008, 09:24 AM | #1 |
Scooby Newbie
Member#: 103209
Join Date: Dec 2005
Location: Greenville, SC
Vehicle:02 STI'd Wagon Silver |
P1591 6mt into 02 wagon code
well, I completed my swap and everything seems to be working well except my reverse lights and I have a CEL which autozone says is P1591 (neutral position switch circuit low input: probable causes 1. open or short circuit condition 2. poor electrical connection 3. failed neutral position switch.
Now everything plugged up fine in the switches except for the one plug that contains the dccd on the 6mt. From my research it looked to me like I was supposed to plug my four pin into the left side (if I'm standing at the front of the car facing the windshield) of the 6 pin plug. did I do this wrong? thanks inadvance! Danny |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Need Checklist Completed: 05 USDM STi 6MT into an 02 WRX | KitchenerWRX | Transmission (AT/MT) & Driveline | 3 | 06-28-2008 09:19 PM |
Questions on 6mt swap into 02 wrx | shadymilkman129 | Transmission (AT/MT) & Driveline | 9 | 08-18-2006 11:46 AM |
Speedo corrections needed? 6MT into 02 WRX | corey_dyck | Transmission (AT/MT) & Driveline | 3 | 03-17-2006 08:58 AM |
6MT into WRX wagon swap questions | bluescoobywagon | Transmission (AT/MT) & Driveline | 4 | 02-19-2006 08:53 PM |
Hooking up a 6mt into a non 6mt car | serious | Subaru Conversions | 4 | 01-20-2004 04:46 PM |