Welcome to the North American Subaru Impreza Owners Club Thursday March 22, 2018
Home Forums WikiNASIOC Products Store Modifications Upgrade Garage
Go Back   NASIOC > NASIOC Technical > Normally Aspirated with bolt-on Forced Induction Powertrain

Welcome to NASIOC - The world's largest online community for Subaru enthusiasts!
Welcome to the NASIOC.com Subaru forum.

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, free of charge, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!

If you have any problems with the registration process or your account login, please contact us.
* Registered users of the site do not see these ads. 
Thread Tools Display Modes
Old 02-20-2018, 12:05 PM   #1
Scooby Specialist
Member#: 170439
Join Date: Jan 2008
Location: Sioux Falls, SD
I <3 Lamp

Default 99 Outback engine rebuild... boost?

I've got a 99 Outback with the ej25D phase 2 bottom end and phase 1 heads.

Bought the car recently and have pulled the engine with my wife to put all new gaskets in and re seal it back up. The stock pistons look fine and the bores have great crosshatching which is surprising considering it has 230k miles on it. Inside of the engine looks immaculate aside from carbon deposits. I have a gt2554 turbo sitting in my garage begging to be put into something. I know the stock compression ratio on this engine is something like 9.7:1 but if I put ej255 pistons in, it should drop to about 8.5:1. My thought is to possibly drop some stock ej255 pistons in that were pulled from a low mileage car getting forged pistons, then run stock ecu with the gt2554, wrx top mount, and a sti fuel pump for awhile. I'm planing on making my own uppipe and downpipe since I have a welder and fabrication experience. Then when I finish figuring out all the wiring I would drop in a microsquirt based diypnp ecu with some sti 565cc injectors.

Not looking for gobs of power obviously, but I do want some semblance of reliability for relatively cheap. Keep in mind I already have the injectors, ecu, and wrx top mount intercooler. I've yet to buy pistons for obvious reasons, same with the sti fuel pump.

My question is, would ej255 or ej257 stock pistons and stock ecu combo be reliable enough for a couple months without issue if I ran 91?

I Have...

  • 99 outback with EJ25D, taken apart in garage
  • GT2554 Turbo from a saab 900 (7psi wastegate)
  • 565cc STI side feeds
  • 02 WRX top mount intercooler
  • DIYPNP Megasquirt ecu

I may need...

  • ej255 or ej257 pistons and rings, used probably.
  • wrx or sti fuel pump

Should I slap the turbo pistons in and run the stock ecu til I put the megasquirt in with the 565cc injectors?
Overall this only should cost me an additional $200 or so since I should be able to scrounge up enough steel pipe for the uppipe and downpipe.
* Registered users of the site do not see these ads.
sorrowfulkiller is offline   Reply With Quote
Sponsored Links
* Registered users of the site do not see these ads.

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -4. The time now is 07:35 AM.

Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Powered by Searchlight © 2018 Axivo Inc.
Copyright ©1999 - 2017, North American Subaru Impreza Owners Club, Inc.