ej20's and what works with what

scobaru · 10-23-2003, 10:45 PM

when I get a jdm swap I wanna know if the usdm ej20 parts work with the jdm ones by parts I mean a down pipe made for a usdm wrx and stuff like that

* Registered users of the site do not see these ads.

supermoose · 10-24-2003, 02:45 AM

parts for JDM? easy.

bottom end: crank/rods = EJ18 parts. most likely u will have for free bc thats what u are pulling outa it.

air filter? same as the EJ18
oil filter: ditto
turbo: im sure any bolt on WRX one will fit
header: i spoke to HKS personally in asia and they said that their header will fit
up-pipe: dont need on. its already no-cat and made outa incronel
downpipe: same deal. most likely usdm will fit. u probbly dont need it though, i dotn think 280PS will be slower than any exhaust modded GDA
some parts should be compatible with USDM legacy turbo. that is only a suspicion though
rallispec can get u gaskets (although USDM ej20 shoudl work fine)
clutch is identical to a USDM WRX GDA clutch. i have one in my attic. i have a exedy USDM GDA clutch on my 94 JDM STI trans

OR u can just buy stuff off UK shops or UK ebay. stuff is cheap there, bc ej20 impreza is so frekin common.

h

Homemade WRX · 10-24-2003, 02:10 PM

I agree with the statement made. Impreza engines are basically like lego's in that they will all fit each other...to an extent

Jaxx · 10-24-2003, 03:07 PM

yeah pretty intchangeable

i used a ej205 oil pan on my ej20g no leaks ..

stimpy · 10-24-2003, 07:28 PM

Jaxx
Scooby Guru

^-- bastard

-Jon

10-23-2003, 10:45 PM	#1
scobaru Scooby Guru Member#: 31345 Join Date: Dec 2002 Chapter/Region: MWSOC Location: Wisconsin Vehicle: 05 LGT, GC8, NA blue, white, blue	ej20's and what works with what when I get a jdm swap I wanna know if the usdm ej20 parts work with the jdm ones by parts I mean a down pipe made for a usdm wrx and stuff like that * Registered users of the site do not see these ads.

10-24-2003, 02:45 AM	#2
supermoose Visiting NASIOC Timeout Member#: 9093 Join Date: Aug 2001 Location: SF Vehicle: 1995 RHD STi RA Ver2 swap starr	answer. parts for JDM? easy. bottom end: crank/rods = EJ18 parts. most likely u will have for free bc thats what u are pulling outa it. air filter? same as the EJ18 oil filter: ditto turbo: im sure any bolt on WRX one will fit header: i spoke to HKS personally in asia and they said that their header will fit up-pipe: dont need on. its already no-cat and made outa incronel downpipe: same deal. most likely usdm will fit. u probbly dont need it though, i dotn think 280PS will be slower than any exhaust modded GDA some parts should be compatible with USDM legacy turbo. that is only a suspicion though rallispec can get u gaskets (although USDM ej20 shoudl work fine) clutch is identical to a USDM WRX GDA clutch. i have one in my attic. i have a exedy USDM GDA clutch on my 94 JDM STI trans OR u can just buy stuff off UK shops or UK ebay. stuff is cheap there, bc ej20 impreza is so frekin common. h

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Baja Turbos: What works with What?	honda killer	Baja Forum	302	12-30-2023 12:24 PM
will an ao with and 04 work with an 03	Ben-no	AccessPort	0	05-29-2006 11:58 AM
clutch and flywheel what works with what?!?!	scobaru	Subaru Conversions	10	01-06-2005 10:21 PM
Advan RG works with what brakes???	Subaruist	Brakes, Steering & Suspension	1	10-22-2002 11:23 PM
Which cold air intakes work with what FMICs?	Diversion	Factory 2.0L Turbo Powertrain (EJ Series Factory 2.0L Turbo)	14	07-15-2002 07:55 AM

10-24-2003, 02:10 PM	#3
Homemade WRX Scooby Guru Member#: 33782 Join Date: Mar 2003 Chapter/Region: MAIC Location: Milton Keynes, UK Vehicle: 96 3MI Racing search FIRST, then PM!!!	I agree with the statement made. Impreza engines are basically like lego's in that they will all fit each other...to an extent

10-24-2003, 03:07 PM	#4
Jaxx Scooby Guru Member#: 177 Join Date: Aug 1999 Chapter/Region: NWIC Location: Austin, Texas, USA Vehicle: The 93 W/EJ20K-sold Subaru-less :(	yeah pretty intchangeable i used a ej205 oil pan on my ej20g no leaks ..

10-24-2003, 07:28 PM	#5
stimpy Homicidal Maniac Moderator Member#: 1612 Join Date: Jun 2000 Location: Austin, TX Vehicle: 2008 STI	Jaxx Scooby Guru ^-- bastard -Jon