What is this connector? (WRX stereo)

ANZAC_1915 · 12-01-2001, 02:00 AM

Make: Matsu****a (Panasonic?)
Model: 86201FC080 (Subaru part number, actually)
Reference Number: CQ-EF7910A

So what is the connector on the left?
(one on the right connects to the car)

Glenn

* Registered users of the site do not see these ads.

WRXIN4IT · 12-01-2001, 02:02 AM

im thinking that its for the sub/amp for under the seat every thing is pre wired just needs to be hooked in

ANZAC_1915 · 12-01-2001, 02:05 AM

Seems like a lot of pins for that.

Speaking of which, any of THIS stuff look familiar?
http://www.maco.panasonic.co.jp/maco...p08e/car3.html

supersubee · 12-01-2001, 02:05 AM

could be output for amp, input for changer, or steering wheel controls. depends on what other cars use that radio. could be for inputs for a nav unit. it looks like the plugs for ford factory changers to be honest.

Kevin
www.subee-sound.com

ANZAC_1915 · 12-01-2001, 02:24 AM

Go to http://www.pasc.panasonic.com/epartr/
and enter CQEF7910A - you get a parts list!

No manuals listed though.

Glenn

ANZAC_1915 · 12-02-2001, 12:21 AM

bump

G-REX · 12-02-2001, 12:53 AM

Don't know what it is but it's more likely that it's the sub woofer plug. It's not pre-wired though.

I just ripped apart my WRX today (seats, carpet, gauge cluster, console, and dash) and didn't see any pre-wiring for the stock sub. There was also another harness connector that was bundled with the stereo harness but not plugged in. Didn't even think to see if that would have fit in the receptacle.

Rocky WRX · 12-02-2001, 10:33 AM

It's not for the sub. The sub for the MY02 WRX comes with a harness that fits between the right connector and the car's stock harness.

ANZAC_1915 · 12-02-2001, 11:32 AM

And to be clear, there is nothing existing in the car that plugs into this connector.

Glenn

North Ursalia · 12-02-2001, 04:36 PM

How about for the Satellite Navigation System/TV System as found overseas? I know from speaking with a gentleman with a grey market STi import in England that the Nav System connected to the radio on his STi 6. Granted, Japan uses a different set of radio frequencies than we do, but it's probably the same head unit with a different crystal for their frequencies. Just a guess

.

Brian
http://www.northursalia.com
http://www.imprezamods.com
http://www.scoobymods.com

cantex · 12-02-2001, 07:35 PM

when you hook up the sub, you use the plug with more pins, the other one remains unused

lgkahn · 12-02-2001, 08:20 PM

speaking of plugs anyone have the plug for the subwoofer lying around unused.. I bought a subwoofer from someone but the connector was for an aftermarket head unit.. thus cannot use it easily in my wrx.

or save that anyone know the part number for the connector that comes with the subwoofer kit.. either from subaru or panasonic.

thanks

ANZAC_1915 · 12-04-2001, 01:43 PM

The service manual for the stock head unit from Panasonic is $6 ish + tax + shipping.

I ordered one.

Glenn

lgkahn · 12-04-2001, 02:02 PM

can you post the part number and where you got it from ..
thanks

Buford T Justice · 12-04-2001, 02:30 PM

While what I am offering has already been posted, I found some useful info at the subarparts.com site. As mentioned by previous replys, the sub hookup plugs in between the existing wiring connector and the 14-pin receptacle on the right hand side of the radio (orientation via Glenn's picture). This info can be found in the installation instructions for the subwoofer which are posted on the subaruparts.com site....There are install instructions for all sorts of stuff. Just find the part that you want to purchase and there should be a link to a .pdf for the install instructions.

lgkahn · 12-04-2001, 06:53 PM

as I said before IU have the subwoofer kit and the instructions but apparently the guy I bought it from they hacked it and didin't have the factory cable and cut the wire instead..

ie mine has a connector into the subwoofer that goes to 4 wires
cut - fuse and power, ground and right and left channel.

I do not want to install it in this hacked manner and cannot find a part number fora the correct connector that is supposed to come with it as per the install instructions.

ANZAC_1915 · 12-04-2001, 10:50 PM

I ordered the manual from Panasonic. No part number, just called 800-833-9626 and asked for the manual for CGEF7910A.

They only had one. Dunno what the wait will be now.

Boy, I'm really hogging the WRX documentation; first the shop manual supplement, now this.

For the guy missing the sub cable, call Subaruparts and see if they have the p/n for the cable by itself. It isn't in the instructions.

Glenn

ANZAC_1915 · 12-06-2001, 10:34 PM

The answer from the Panasonic service manual which arrived today:

This 16pin connector is for an external CD changer!!!!!!!!!

I guess 6 CDs isn't enough!

It has L+R inputs, mute, bus signals etc.

You use the "CD" button to roll between the internal changer and external. I assume it must detect it first on the bus. I assume it must be a Matsu****a/Panasonic changer.

Pity. You could use these external inputs for something.

Glenn

iouri · 12-07-2001, 01:08 PM

I wonder if you'll use a 10 disk changer, how would you select disks # 7-10?

ANZAC_1915 · 12-07-2001, 07:38 PM

I was wondering that myself. Suspect it only really supports +6, based on the display and keys. No mention in service manual.

Glenn

SubEd · 12-07-2001, 07:44 PM

With the Pioneer 12 disc changer, buttons 1-6 select those CD's. Push and hold button one selects CD 7, etc....

ANZAC_1915 · 12-08-2001, 12:38 AM

Looking at the display, there may be other (>=7) LCD elements there.

Cavic · 12-09-2001, 12:10 AM

Can you share any relevant specs from the manual you ordered for the factory radio such as watts RMS?

Thanks

jlw · 12-09-2001, 12:35 AM

How about a function table of the connectors ... or at least which pin is "mute"? My Nokia hands free cell phone cradle can use it to automatically mute the radio when a call is received.

Also, what are the specs. for the mute line? Mute when grounded I'd guess.

ANZAC_1915 · 12-12-2001, 09:42 PM

The other thread on this connector has the pinouts, as discussed.

Re specs of stock head unit:

General:
Power Supply: DC 12V (11V ~ 16V), Negative ground, Test voltage 13.2V
Current Consumption: Less than 2.5A (max vol)
Power Output: 25W x 4ch (no statement about RMS or not)
Output Impedence: 4 ohms.

AM Radio:
Frequency Range: 530 ~ 1710 kHz
Usable Sensitivity: 26db (uV) S/N 20dB

FM Stereo Radio:
Frequency Range: 87.7 ~ 107.9 MHz
Usable Sensitivity: 6dB (uV) S/N 30dB

Cassette Player:
Reproduction system: 4 track, 2 program stereo.
Tape speed: 4.76 cm/s
Wow and flutter: < 0.2% WRMS
S/N Ratio: 55dB

CD Changer
S/N Ratio: more than 68dB IHF-A
THD: < 0.4%
Channel Sep: 62dB IHF-A

Dimensions: 178W x 100D x 174H mm
Weight: 2.7 kg

12-02-2001, 07:35 PM	#11
cantex Scooby Newbie Member#: 9611 Join Date: Aug 2001 Location: katy	one is not used when you hook up the sub, you use the plug with more pins, the other one remains unused

12-04-2001, 10:50 PM	#17
ANZAC_1915 Scooby Guru Member#: 456 Join Date: Oct 1999 Chapter/Region: NWIC Location: Redmond, WA, USA Vehicle: 2008 Forester XT Steel Gray Metallic	I ordered the manual from Panasonic. No part number, just called 800-833-9626 and asked for the manual for CGEF7910A. They only had one. Dunno what the wait will be now. Boy, I'm really hogging the WRX documentation; first the shop manual supplement, now this. For the guy missing the sub cable, call Subaruparts and see if they have the p/n for the cable by itself. It isn't in the instructions. Glenn Last edited by ANZAC_1915; 12-04-2001 at 10:57 PM.

12-09-2001, 12:10 AM	#23
Cavic Scooby Newbie Member#: 13143 Join Date: Dec 2001	Specs on Head unit Can you share any relevant specs from the manual you ordered for the factory radio such as watts RMS? Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What is this connector?	WRexxer	Electrical & Lighting	1	06-20-2006 09:23 AM
What is this connector for?	subysouth	Transmission (AT/MT) & Driveline	6	09-27-2004 01:35 PM
What is this connector? (photo)	66666	Electrical & Lighting	0	08-12-2004 09:15 PM
What is this connector, and why is it unplugged??	Kwyjibo	Electrical & Lighting	7	09-24-2003 01:21 AM
What is this connector called ?	brunetmj	Car Audio, Video & Security	3	06-14-2002 12:12 PM

12-01-2001, 02:02 AM	#2
WRXIN4IT Scooby Newbie Member#: 12374 Join Date: Nov 2001 Location: Charlotte, NC Vehicle: 2002 Impreza WRX ASPEN WHITE	im thinking that its for the sub/amp for under the seat every thing is pre wired just needs to be hooked in

12-01-2001, 02:05 AM	#3
ANZAC_1915 Scooby Guru Member#: 456 Join Date: Oct 1999 Chapter/Region: NWIC Location: Redmond, WA, USA Vehicle: 2008 Forester XT Steel Gray Metallic	Seems like a lot of pins for that. Speaking of which, any of THIS stuff look familiar? http://www.maco.panasonic.co.jp/maco...p08e/car3.html

12-01-2001, 02:05 AM	#4
supersubee Scooby Specialist Member#: 351 Join Date: Oct 1999 Location: NE Vehicle: 97 Legacy GT White	could be output for amp, input for changer, or steering wheel controls. depends on what other cars use that radio. could be for inputs for a nav unit. it looks like the plugs for ford factory changers to be honest. Kevin www.subee-sound.com

12-01-2001, 02:24 AM	#5
ANZAC_1915 Scooby Guru Member#: 456 Join Date: Oct 1999 Chapter/Region: NWIC Location: Redmond, WA, USA Vehicle: 2008 Forester XT Steel Gray Metallic	Go to http://www.pasc.panasonic.com/epartr/ and enter CQEF7910A - you get a parts list! No manuals listed though. Glenn

12-02-2001, 12:21 AM	#6
ANZAC_1915 Scooby Guru Member#: 456 Join Date: Oct 1999 Chapter/Region: NWIC Location: Redmond, WA, USA Vehicle: 2008 Forester XT Steel Gray Metallic	bump

12-02-2001, 12:53 AM	#7
G-REX Scooby Specialist Member#: 8804 Join Date: Jul 2001 Chapter/Region: South East Vehicle: 2008 Impreza STi Dark Gray Metallic	Don't know what it is but it's more likely that it's the sub woofer plug. It's not pre-wired though. I just ripped apart my WRX today (seats, carpet, gauge cluster, console, and dash) and didn't see any pre-wiring for the stock sub. There was also another harness connector that was bundled with the stereo harness but not plugged in. Didn't even think to see if that would have fit in the receptacle.

12-02-2001, 10:33 AM	#8
Rocky WRX Scooby Specialist Member#: 9837 Join Date: Sep 2001 Chapter/Region: RMIC Location: Evergreen CO Vehicle: 2015 Forester XT Blue	It's not for the sub. The sub for the MY02 WRX comes with a harness that fits between the right connector and the car's stock harness.

12-02-2001, 11:32 AM	#9
ANZAC_1915 Scooby Guru Member#: 456 Join Date: Oct 1999 Chapter/Region: NWIC Location: Redmond, WA, USA Vehicle: 2008 Forester XT Steel Gray Metallic	And to be clear, there is nothing existing in the car that plugs into this connector. Glenn

12-02-2001, 04:36 PM	#10
North Ursalia Miss You Mom Oct 1940 - Feb 2008 Super Moderator Member#: 809 Join Date: Jan 2000 Chapter/Region: NESIC Location: NH, Land Of Many Trees Vehicle: 2000 2.5 RS, '14 For 92 5MT SVX	How about for the Satellite Navigation System/TV System as found overseas? I know from speaking with a gentleman with a grey market STi import in England that the Nav System connected to the radio on his STi 6. Granted, Japan uses a different set of radio frequencies than we do, but it's probably the same head unit with a different crystal for their frequencies. Just a guess . Brian http://www.northursalia.com http://www.imprezamods.com http://www.scoobymods.com

12-02-2001, 08:20 PM	#12
lgkahn Scooby Specialist Member#: 9793 Join Date: Aug 2001 Location: londonderry nh Vehicle: 2002 2010 legacy gt red	speaking of plugs anyone have the plug for the subwoofer lying around unused.. I bought a subwoofer from someone but the connector was for an aftermarket head unit.. thus cannot use it easily in my wrx. or save that anyone know the part number for the connector that comes with the subwoofer kit.. either from subaru or panasonic. thanks

12-04-2001, 01:43 PM	#13
ANZAC_1915 Scooby Guru Member#: 456 Join Date: Oct 1999 Chapter/Region: NWIC Location: Redmond, WA, USA Vehicle: 2008 Forester XT Steel Gray Metallic	The service manual for the stock head unit from Panasonic is $6 ish + tax + shipping. I ordered one. Glenn

12-04-2001, 02:02 PM	#14
lgkahn Scooby Specialist Member#: 9793 Join Date: Aug 2001 Location: londonderry nh Vehicle: 2002 2010 legacy gt red	can you post the part number and where you got it from .. thanks

12-04-2001, 02:30 PM	#15
Buford T Justice Scooby Newbie Member#: 8857 Join Date: Jul 2001 Vehicle: 2002 WRX Silver	While what I am offering has already been posted, I found some useful info at the subarparts.com site. As mentioned by previous replys, the sub hookup plugs in between the existing wiring connector and the 14-pin receptacle on the right hand side of the radio (orientation via Glenn's picture). This info can be found in the installation instructions for the subwoofer which are posted on the subaruparts.com site....There are install instructions for all sorts of stuff. Just find the part that you want to purchase and there should be a link to a .pdf for the install instructions.

12-04-2001, 06:53 PM	#16
lgkahn Scooby Specialist Member#: 9793 Join Date: Aug 2001 Location: londonderry nh Vehicle: 2002 2010 legacy gt red	as I said before IU have the subwoofer kit and the instructions but apparently the guy I bought it from they hacked it and didin't have the factory cable and cut the wire instead.. ie mine has a connector into the subwoofer that goes to 4 wires cut - fuse and power, ground and right and left channel. I do not want to install it in this hacked manner and cannot find a part number fora the correct connector that is supposed to come with it as per the install instructions.

12-06-2001, 10:34 PM	#18
ANZAC_1915 Scooby Guru Member#: 456 Join Date: Oct 1999 Chapter/Region: NWIC Location: Redmond, WA, USA Vehicle: 2008 Forester XT Steel Gray Metallic	The answer from the Panasonic service manual which arrived today: This 16pin connector is for an external CD changer!!!!!!!!! I guess 6 CDs isn't enough! It has L+R inputs, mute, bus signals etc. You use the "CD" button to roll between the internal changer and external. I assume it must detect it first on the bus. I assume it must be a Matsu****a/Panasonic changer. Pity. You could use these external inputs for something. Glenn

12-07-2001, 01:08 PM	#19
iouri Scooby Newbie Member#: 9412 Join Date: Aug 2001 Location: Toronto, ON Vehicle: 2002 WRX Wagon Silver	I wonder if you'll use a 10 disk changer, how would you select disks # 7-10?

12-07-2001, 07:38 PM	#20
ANZAC_1915 Scooby Guru Member#: 456 Join Date: Oct 1999 Chapter/Region: NWIC Location: Redmond, WA, USA Vehicle: 2008 Forester XT Steel Gray Metallic	I was wondering that myself. Suspect it only really supports +6, based on the display and keys. No mention in service manual. Glenn

12-07-2001, 07:44 PM	#21
SubEd Scooby Guru Member#: 717 Join Date: Jan 2000 Chapter/Region: NESIC	With the Pioneer 12 disc changer, buttons 1-6 select those CD's. Push and hold button one selects CD 7, etc....

12-08-2001, 12:38 AM	#22
ANZAC_1915 Scooby Guru Member#: 456 Join Date: Oct 1999 Chapter/Region: NWIC Location: Redmond, WA, USA Vehicle: 2008 Forester XT Steel Gray Metallic	Looking at the display, there may be other (>=7) LCD elements there.

12-09-2001, 12:35 AM	#24
jlw Scooby Newbie Member#: 12654 Join Date: Nov 2001 Location: Cedarville, MI Vehicle: 02 WRX Sdn, 2.5L Element Tuning GT65r/hdrs	How about a function table of the connectors ... or at least which pin is "mute"? My Nokia hands free cell phone cradle can use it to automatically mute the radio when a call is received. Also, what are the specs. for the mute line? Mute when grounded I'd guess.

12-12-2001, 09:42 PM	#25
ANZAC_1915 Scooby Guru Member#: 456 Join Date: Oct 1999 Chapter/Region: NWIC Location: Redmond, WA, USA Vehicle: 2008 Forester XT Steel Gray Metallic	The other thread on this connector has the pinouts, as discussed. Re specs of stock head unit: General: Power Supply: DC 12V (11V ~ 16V), Negative ground, Test voltage 13.2V Current Consumption: Less than 2.5A (max vol) Power Output: 25W x 4ch (no statement about RMS or not) Output Impedence: 4 ohms. AM Radio: Frequency Range: 530 ~ 1710 kHz Usable Sensitivity: 26db (uV) S/N 20dB FM Stereo Radio: Frequency Range: 87.7 ~ 107.9 MHz Usable Sensitivity: 6dB (uV) S/N 30dB Cassette Player: Reproduction system: 4 track, 2 program stereo. Tape speed: 4.76 cm/s Wow and flutter: < 0.2% WRMS S/N Ratio: 55dB CD Changer S/N Ratio: more than 68dB IHF-A THD: < 0.4% Channel Sep: 62dB IHF-A Dimensions: 178W x 100D x 174H mm Weight: 2.7 kg