Who makes aftermarket parts for the new wrx?

8Complex · 11-29-2000, 01:01 PM

You might be able to work out something with your dealer but I imagine they'll be raping you on prices of parts, though. Even if you order all Subaru JDM parts, they'll have to order them, then wait... maybe months before it gets here. Then they'll charge you for installation, and who knows if they'll cover it on warantee then, even if they are actual Subaru parts.

* Registered users of the site do not see these ads.

Keith · 11-29-2000, 01:15 PM

I dont think I have to worry about my dealer raping me (I dont think he is attracted to me that way..hehe )
my dealer does all my mods on my my99 neways..and he is always good with the prices. The only problem I would have is waiting months to get stuff, thats not worth it. I was hoping there was a company out there making toys for the new car already, that I can order from. WE still have a couple of months.

Keith

v6scoobie · 11-29-2000, 01:41 PM

I should be able to get the exhaust .They already have been made for the test vehicles over here.
Randy

Keiho · 11-29-2000, 03:11 PM

Are you asking about Japanese tuners making parts for the new car? There's tons of them already I'm sure.

goten · 11-29-2000, 03:39 PM

i think C-west already have a body kit...
others like syms, trust, cusco will have stuff for it very soon

Patrick L · 11-29-2000, 06:15 PM

You should be able to use the aftermarket headers, down pipes, exhaust, intakes and other under the hood stuff on the new WRX that works on the older versions like the 99' and 00', cause it's pretty much all the same under the hood. Other than a bigger turbo and intercooler than the WRX v.6.
Places like MRT, BPM , SPO and others. Before too long, other local stores will start selling the stuff.
These were on the MRT site.
Exhaust

Intakes piping

Syms Headers on SPO's site http://www.spomotorsports.com/CategorizedTableDisplayTemplateOffset.cfm? CategoryID=24&CustomerID=39270

[This message has been edited by KC_TopDog (edited November 29, 2000).]

[This message has been edited by KC_TopDog (edited November 29, 2000).]

Impreza Rider · 11-29-2000, 07:05 PM

So, anyone want to guess what would swap over from the current body? Strut braces, mufflers, sway bars, etc.?

Jim

Keith · 11-30-2000, 12:56 AM

There has to be some people in japan making stuff already. does anyone have links to their site? I would like to have mine with wrc wing, new exhaust/intake/up pipe and boost controler when I pick it up from the dealer. (I may just be dreaming.

)
I dont feel like modding it after I just bought it, I want to buy it modded

Keith

Keith · 11-30-2000, 06:19 AM

Good question jim, I hope that I can get my AFC over atleast...and other than that, I am going to keep my k&N cone filter..other than that I think everything else is gonna change. I dont think I will be able to use the front and rear links, or the alk. damn sway bar will be out also

Booo... oh well..supposedly (according to aussie video) the car is very netrual on its own...I hope so
Keith

Patrick L · 11-30-2000, 08:44 AM

Here is another site with parts for the WRX. http://www.airpowersystems.com.au/wrx/wrx.htm
I like this intake which goes intot he fender.

11-30-2000, 12:56 AM	#8
Keith Scooby Guru Member#: 191 Join Date: Aug 1999 Chapter/Region: NESIC Location: seattle Vehicle: 2012 J train Brown	Who makes aftermarket parts for the new wrx? There has to be some people in japan making stuff already. does anyone have links to their site? I would like to have mine with wrc wing, new exhaust/intake/up pipe and boost controler when I pick it up from the dealer. (I may just be dreaming. ) I dont feel like modding it after I just bought it, I want to buy it modded Keith

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
who makes aftermarket struts for 05 sti?	Blk05STi	Brakes, Steering & Suspension	28	03-02-2010 05:22 PM
Who makes aftermarket fogs for '02?	DTS.WRX.02	Electrical & Lighting	12	02-18-2007 10:33 PM
anyone know who makes aftermarket tmic's for 2004 usdm sti	odin1	Factory 2.5L Turbo Powertrain (EJ Series Factory 2.5L Turbo)	26	01-16-2004 07:09 PM
Aftermarket parts for the 02 WRX	bluebeast	Interior & Exterior Modification	9	08-03-2001 09:51 AM
Who makes coil-overs for the RS/WRX?	Stallion	WRX Forum Archive	5	02-14-2001 06:25 PM

11-29-2000, 01:01 PM	#1
8Complex Moderator Member#: 922 Join Date: Feb 2000 Chapter/Region: MWSOC Location: Schaumburg, IL Vehicle: 16 WRX (white) 04 FXT (red)	You might be able to work out something with your dealer but I imagine they'll be raping you on prices of parts, though. Even if you order all Subaru JDM parts, they'll have to order them, then wait... maybe months before it gets here. Then they'll charge you for installation, and who knows if they'll cover it on warantee then, even if they are actual Subaru parts. * Registered users of the site do not see these ads.

11-29-2000, 01:15 PM	#2
Keith Scooby Guru Member#: 191 Join Date: Aug 1999 Chapter/Region: NESIC Location: seattle Vehicle: 2012 J train Brown	I dont think I have to worry about my dealer raping me (I dont think he is attracted to me that way..hehe ) my dealer does all my mods on my my99 neways..and he is always good with the prices. The only problem I would have is waiting months to get stuff, thats not worth it. I was hoping there was a company out there making toys for the new car already, that I can order from. WE still have a couple of months. Keith

11-29-2000, 01:41 PM	#3
v6scoobie Scooby Specialist Member#: 1563 Join Date: May 2000	I should be able to get the exhaust .They already have been made for the test vehicles over here. Randy

11-29-2000, 03:11 PM	#4
Keiho Scooby Guru Member#: 610 Join Date: Dec 1999 Chapter/Region: VIC Location: Vancouver, BC, Canada Vehicle: 2003 Lexus IS300 Graphite Gray Pearl	Are you asking about Japanese tuners making parts for the new car? There's tons of them already I'm sure.

11-29-2000, 03:39 PM	#5
goten Visiting NASIOC Timeout Member#: 421 Join Date: Oct 1999 Location: Vancouver BC, Canada Vehicle: 2003 V35 Skyline 2004 WRX STi	i think C-west already have a body kit... others like syms, trust, cusco will have stuff for it very soon

11-29-2000, 06:15 PM	#6
Patrick L Scooby Specialist Member#: 634 Join Date: Dec 1999 Chapter/Region: TXIC Location: Oklahoma City, OK Vehicle: 2000 Impreza 2.5RS Becasue racecar	You should be able to use the aftermarket headers, down pipes, exhaust, intakes and other under the hood stuff on the new WRX that works on the older versions like the 99' and 00', cause it's pretty much all the same under the hood. Other than a bigger turbo and intercooler than the WRX v.6. Places like MRT, BPM , SPO and others. Before too long, other local stores will start selling the stuff. These were on the MRT site. Exhaust Intakes piping Syms Headers on SPO's site http://www.spomotorsports.com/CategorizedTableDisplayTemplateOffset.cfm? CategoryID=24&CustomerID=39270 [This message has been edited by KC_TopDog (edited November 29, 2000).] [This message has been edited by KC_TopDog (edited November 29, 2000).]

11-29-2000, 07:05 PM	#7
Impreza Rider Scooby Specialist Member#: 756 Join Date: Jan 2000 Chapter/Region: MAIC Location: Ashburn, Va Vehicle: 2003 Legacy L wagon 2009 Kawasaki C14	So, anyone want to guess what would swap over from the current body? Strut braces, mufflers, sway bars, etc.? Jim

11-30-2000, 06:19 AM	#9
Keith Scooby Guru Member#: 191 Join Date: Aug 1999 Chapter/Region: NESIC Location: seattle Vehicle: 2012 J train Brown	Good question jim, I hope that I can get my AFC over atleast...and other than that, I am going to keep my k&N cone filter..other than that I think everything else is gonna change. I dont think I will be able to use the front and rear links, or the alk. damn sway bar will be out also Booo... oh well..supposedly (according to aussie video) the car is very netrual on its own...I hope so Keith

11-30-2000, 08:44 AM	#10
Patrick L Scooby Specialist Member#: 634 Join Date: Dec 1999 Chapter/Region: TXIC Location: Oklahoma City, OK Vehicle: 2000 Impreza 2.5RS Becasue racecar	Here is another site with parts for the WRX. http://www.airpowersystems.com.au/wrx/wrx.htm I like this intake which goes intot he fender.