|
|
|
|
Thread Tools | Display Modes |
11-25-2012, 02:13 AM | #1 |
Scooby Newbie
Member#: 177706
Join Date: Apr 2008
|
obd-2 q's
I'm in the process of wiring in an jdm v7 sti into a 97 legacy outback, I'm trying to figure out why the obd-2 port isn't working. I have the powers and grounds working properly, There's a few wires I'm not sure when it
comes to wiring. what I can figure out because the fsm and other diagrams are wrong when it comes to pin 8 is actually pin 9 which is the ignition power. pin# 1: not used pin# 2: ssm/gst communications A134 pin 21 ecu side pin# 3: not used pin# 4: Ground pin# 5: ground pin# 6: not used pin# 7: not used pin# 8: not used pin # 9: ignition power (jdm harness black/ red stripe) pin# 10: not used pin# 11: not used pin# 12: brown/ white stripe ? pin# 13: Green/red stripe ? pin# 14: red/ white stripe ? pin# 15: not used Pin# 16: battery power So pin 12/13/14 where do these land at the ecu side? and which is the k-line and l-line? Any help please Thanks, Brian. |
Thread Tools | |
Display Modes | |
|
|