|
|
|
|
Thread Tools | Display Modes |
11-25-2012, 12:56 PM | #1 |
Scooby Newbie
Member#: 279118
Join Date: Apr 2011
Vehicle:1995 Legacy Lsi 2.2L |
PCV hose broke
95 Legacy Lsi. Was going to replace PCV Valve. Went to pull hose out and it was kind of stiff so I tugged harder and the hose at BOTH ends came out. Now I have the PCV valve on the engine side and a plastic piece on the other which is stuck inside another hose (normally sticks out a bit to connect to the PCV hose) and the other part of the plastic is in the stiff and brittle crap hose I pulled. Need some advice.
* Registered users of the site do not see these ads.
|
Thread Tools | |
Display Modes | |
|
|