|
|
|
|
Thread Tools | Display Modes |
10-18-2019, 09:56 PM | #1 |
Scooby Newbie
Member#: 370021
Join Date: Oct 2013
Chapter/Region:
RMIC
Location: Salt Lake City, Utah
Vehicle:2008 WRX Hatchback WRB |
Whose the go to for custom CV Axles?
I have a 2002 wrx that's been taken RWD. TSS dual caliper rear knuckles are on the way. To run the new knuckles, I have to run a BRZ hub to keep it 5x100 ( I want to keep it 5x100 because I have 3 sets of wheels to mount tires and bring to drift events). Im still on the welded R160. Eventually I plan on building a custom subframe so I can mount a R200. As of now, I need to connect an R160 to BRZ hubs, and I have no idea if the spline count is the same. I basically need a beefier rear axle with R160 splines on the diff end and a BRZ spline on the other end, same length as stock WRX axles. Anyone know of a place willing to take this on?
* Registered users of the site do not see these ads.
|
10-18-2019, 09:58 PM | #2 |
Scooby Guru
Member#: 67004
Join Date: Jul 2004
Chapter/Region:
SCIC
Location: (818) 300k+ ej205 ppg 5mt
Vehicle:02 vf30 pnp wagon silver and cf |
Rwd. I would run r180 with Missing Link or something. As r160 is whimpy. Broke 2 of them.
|
10-18-2019, 10:08 PM | #3 |
Scooby Newbie
Member#: 370021
Join Date: Oct 2013
Chapter/Region:
RMIC
Location: Salt Lake City, Utah
Vehicle:2008 WRX Hatchback WRB |
I agree. The whole car is a work in progress, this is just to keep me going while I plan out the rest of the rear end. does the R180 have the same spline count as the wrx? Because if so then the original post still stands, if not I'll keep it on the R160 until I can get the subframe put together for a 200. of course I'll probably need custom axles for that too. I dont know what parts play well between Nissan and the BRZ.
|
Thread Tools | |
Display Modes | |
|
|