|
|
|
|
Thread Tools | Display Modes |
03-23-2010, 06:53 PM | #1 |
Former Vendor
Vendor Sales Rating: (10)
Member#: 6776
Join Date: May 2001
Chapter/Region:
NWIC
|
PERRIN has everything you need at the ** BEST PRICE **
Awesome deals at PERRIN Performance all season long. Wholesale clients please contact your PERRIN sales rep. Wholesale Clients Please Contact Your PERRIN Sales Rep At PERRIN Performance we care enough about YOU, to put extra effort into our products and services, insuring you get the absolute best part at a great price. Drawing feedback from our past clientele, we continually review and revise our products to make them the best choice available on the market today! We are extremely proud that most PERRIN Performance products are Made In The USA. While this does create a challenge for cost vs. goods made by our competitors overseas, we strongly believe it is the correct thing to do! Thus supporting the American economy with the use of raw materials and even more importantly labor! Keeping American’s at work is good for ALL aspects of the industry and economy. Help us in supporting the USA and buy PERRIN brand performance parts for your Subaru! We carry a wide variety of the "bread and butter" parts that make your Subaru perform! Want to make an even larger jump in performance? Then check out our specialty parts such as turbo systems, intercoolers, and Staged Tunings Packages. Read on to see what we have for your Subaru! Intakes Wanting to extract more power from your Subaru? Then one of the FIRST engine modifications to choose is a free flowing intake. PERRIN leads the pack on design and performance with our systems for all WRXs and STIs. Our Intake systems are tested to insure proper air/fuel ratios on stock tuned vehicles with no check engine lights or lean mixture issues. Easy to install with simple hand tools makes this a great first addition to your performance path! Click Your Car Below To Check Out Your Specific Intake 2002-2007 STI & WRX Cold Air 2002-2007 STI & WRX Short Ram 2008-2010 STI & WRX Cold Air Pre-Turbo Exhaust Components Proper exhaust flow BEFORE the turbo is integral to proper turbo performance. The parts in the path from the engine to the turbo, are very important parts to consider when modifying your Subaru. Specifically the Header and the Up-Pipe on your 2002+ WRX and STI. After installing the PERRIN Equal Length Header you will instantly notice faster turbo spool, creating a broader torque curve which equals a faster car. The PERRIN High Flow Up-Pipe smoothes out and improves exhaust flow directly into the turbo, increasing turbo response and adding power. Installing both Equal Length Header and Up-Pipe as a combo, will result in a multiplication of the performance gains. The Up-Pipe fits all STIs & WRXs 2002-2010. The Equal Length Header fits all 2004-2010 STIs & 2002-2010 WRXs (check our website links below for specific details on your vehicle.) Click The Products Below To Check Them Out On The PERRIN Web Site Equal Length Header Up-Pipe Header & Up-Pipe Combo Post-Turbo Exhaust Post-Turbo Exhaust parts include the Downpipe and Cat-Back Systems. One of the key modifications if not THE most important to making power on a turbo charged car is getting the exhaust out and away from the turbo. In an ideal situation your would want to have the plumbing get bigger and bigger leading away from the turbo. While ideal, it is not practical due to restrictions of ground clearance and suspension components. By allowing the turbo to spin freely and sooner, reducing turbo lag and increasing power. The High Flow PERRIN Down Pipe bolts between the turbo and the cat back exhaust. Using 3" smoothly bent 304 Stainless Steel, dramatically increases exhaust flow exiting the turbo then passing through a high flow 200cell per inch metallic substrate catalytic converter, helps keep the environment clean. Directly behind the Down Pipe is the Cat Back Exhaust system. This final section of exhaust can be seen clearly from the rear of the car under the rear bumper and can make a dramatic visual improvement as well as performance. The Cat Back Exhaust is commonly the first modification many enthusiasts install because it makes several improvements to the vehicle. 1.) Looks cool & shows your friends and enemies that you may have more power than them. 2.) Sounds Cool, see #1 above. 3.) Actually has a big impact on performance, gains of up to 20hp can be seen just by bolting on a Cat back Exhaust. Check out the links below for more information on your specific application. Click The Products Below To Check Them Out On The PERRIN Web Site Down Pipe 2002-2007 WRX & STI Down Pipe 2008-2010 WRX & STI Cat Back Exhaust 2002-2007 WRX & STI Cat Back Exhaust 2008-2010 STI Cat Back Exhaust 2008-2010 WRX Hatchback Cat Back Exhaust 2008-2010 WRX Sedan Boost Control Many Subaru enthusiasts, especially NASIOC members get their WRX or STI tuned to extract additional power. One of the key tuning parameters is boost or controlling the boost. Boost is a good thing but it must be controlled and metered properly as too much is actually a very bad thing. PERRIN Performance has two tools to help you and your tuner control and modulate your boost pressure. The old faithful Manual Boost Controller and the Electronic Boost Control Solenoid (MBC and EBCS). The Manual Boost Controller is a simple to install device that PERRIN has made a bit more "complex" than others yet still very easy for you to use. Screw the two halves together for more boost and un-screw it for less. We made it more "complicated" by designing it to be both a bleed type and ball & spring type (click on the part below to read more). A more advanced product is the PERRIN Performance Electronic Boost Control Solenoid, this device allows the tuners to have full control of your boost via the ECU, either OEM or aftermarket stand-alone. From the PERRIN web site; "The PERRIN EBCS™ can be setup like the stock solenoid, to "BLEED" boost from the system, but that is not where the EBCS™ has its advantage. The PERRIN 3 port EBCS™ can be setup to "block" pressure from getting to the wastegate actuator. This makes for a more responsive turbo and for much better boost control, not to mention higher boost levels are possible with proper tuning. In this case 3 is better than 2!"(click on the part below to read more) Click The Products Below To Check Them Out On The PERRIN Web Site Electronic Boost Control Solenoid (E.B.C.S.) Manual Boost Controller (MBC) Keep Reading................
* Registered users of the site do not see these ads.
Last edited by PERRIN; 11-22-2011 at 01:59 PM. |
03-23-2010, 06:54 PM | #2 |
Former Vendor
Vendor Sales Rating: (10)
Member#: 6776
Join Date: May 2001
Chapter/Region:
NWIC
|
Front Mount Intercoolers
The more power you make with a turbo, the more heat you create. The air that comes out of a turbo is hot for a couple reasons. 1.) The part that it flows through is connected to the HOT exhaust. 2.) When air is compressed it heats up (I wont go into details on that, you should have been awake during science class). To counter this the factory has installed a small intercooler on top of the engine. This is a bad place for performance as the factory intercooler will heat soak very fast because of its size and location, and they know it because they installed a scoop to try and cool it. To totally remedy this situation PERRIN Performance designed the best and most comprehensive Front Mount Intercooler (FMIC) Kit on the market. The PERRIN FMIC kits come with Cast End Tanks, HUGE Bar and Plate Cores, High Velocity Tubing, T-Bolt Clamps, and MUCH MORE. Not only does this FMIC perform but it flat out looks AWESOME, check out the pictures on our web site or in THIS THREAD on NASIOC. (Read a lot more information on the PERRIN web site) Click Your Car Below To Check Out Your Specific FMIC Kit 2002-2007 WRX & STI 2008-2010 WRX & STI Rotated Turbo Kits Do you want BIG POWER with show stopping quality and craftsmanship? Look no further than PERRIN's line of Rotated Turbo Kits! A Rotated Turbo Kit is a full kit that combines a large turbo, 44mm waste gate, special Up-Pipe & Down Pipe with all the hardware and detailed instructions to install a Garrett Ball Bearing Turbo up and to the passenger side where there is room for the larger turbo and adequate space to fit a smooth high flow down pipe with out having to compromise because of the firewall. We have kits that can get you from 300hp on up to 600hp+. I could go on and on here but simply put these kits have AWESOME power potential and GREAT looks that will make your friends jealous and your enemies shiver. Click Your Car Below To Check Out The Turbo Kits We Have For You 2002-2007 STI & WRX 2008-2010 STI & WRX Top Mount Intercooler The more power you make with a turbo, the more heat you create. The air that comes out of a turbo is hot for a couple reasons. 1.) The part that it flows through is connected to the HOT exhaust. 2.) When air is compressed it heats up (I wont go into details on that, you should have been awake during science class). To counter this the factory has installed a small intercooler on top of the engine. The size of the factory intercooler REALLY HURTS the performance of your WRX, especially in hotter weather. To counter this PERRIN has designed a LARGE Top Mount Intercooler (TMIC) that has the cooling capacity to overcome the normal heat soak situation. Along with more cooling the PERRIN TMIC flows better due to the precision cast end tanks and the high flowing nature of the bar and plate core. Click The Part Below To Check It Out On The PERRIN Web Site Top Mount Intercooler For 2008-2010 WRX & 2005-2008 Legacy GT Light Weight Crank Pulley Does this part REALLY work? We get asked that every day, I say, "just ask the THOUSANDS OF HAPPY CUSTOMERS." The Light Weight Crank Pulley is our number one selling product (units sold). It works because it is simple and makes sense, lighten up the rotating assembly and you increase throttle response, free up horse power and as a by-product reduce lag. The Light Weight Crank Pulley fits all modern Subaru 4 cylinder engines. Click Below To Check This Part Out On The PERRIN Web Site Light Weight Crank Pulley Radiator Shroud Let your radiator look hot while getting cool. The PERRIN PerformanceTM Radiator Shroud caps the top of the radiator for a sleek new look and forces all available airflow through the core. This lowers operating temperature and increases power. Available in silver or black powder coated aluminum. Both feature the PERRIN name laser cut into the metal for that custom hot/cool look. The PERRIN Radiator Shroud fits all 2002-2007 WRXs & STIs. Click Below To Check This Part Out On The PERRIN Web Site Radiator Shroud For 2002-2007 WRX & STI Keep Reading ....................... Last edited by PERRIN; 03-23-2010 at 08:23 PM. |
03-23-2010, 06:54 PM | #3 |
Former Vendor
Vendor Sales Rating: (10)
Member#: 6776
Join Date: May 2001
Chapter/Region:
NWIC
|
Oil Catch Cans
PERRIN Performance Oil Catch Cans are designed to do just that, catch oil. Not just any oil, but the nasty blow-by gas and oil from the crank case before it gets routed back into the intake stream (like the factory system does.) Why is this important? The oily blow-by in the crank case ventilation systems cause nothing but a gooey sticky mess and insures performance problems for your Subaru if left with the factory routing. With every hour the engine operates, it reduces the efficiencies of the turbo and intercooler as it coats them with this oily sludge. It will also make its way to the combustion chambers where it will gum up the valves and leads to a detonation prone situation. The PERRIN Oil Catch Can will protect you from this headache, keep your performance level where it is and looks great in the engine bay! Read more on our web site. Available in Red, Blue or Black. Click Below To Check This Item Out On The PERRIN Web Site Oil Catch Can Coolant Over Flow Tank Replace your ugly OEM plastic coolant overflow tank with the PERRIN Coolant Over Flow Tank! The kit includes a powdercoated coolant tank as well as various mounting brackets that allow you to install the tank virtually anywhere. Our new coolant tank holds more coolant than our previous design AND uses your OEM tank cap for a great seal! It adds clearance for aftermarket intercooler piping and a great compliment to kits that don't include them. Available in powdercoated black to compliment any engine bay. Universally designed to work with nearly all coolant systems. Click Below To Check This Item Out On The PERRIN Web Site Coolant Over Flow Tank High Flow Precision Fuel Rails The PERRIN Performance fuel rail kit is not just a simple replacement part. PERRIN has completely redesigned and redirected the fuel from the supply lines to the injectors, thus solving all fuel distribution problems and insuring even fuel distribution to both banks of cylinders in the boxer engine. As clients continue to increase the HP and Torque, the need for even fuel delivery is even more critical. Failure to address this concern and your expensive motor can quickly require some major attention! Our newest variant of this rail system is both easier to install and safer than ever before. Further proving our distinction as the industry leader in fuel rail technology for Subaru applications, we now include DOT approved fuel lines and PERRIN Pyroshield! This fire retardant sleeve is placed over the fuel hose to protect the fuel lines from being becoming damaged while subjected to the extreme underhood heat created by turbocharged engines. Plus the Pyroshield keeps that underhood heat from increasing fuel temps. Cooler fuel equals an improvement in horsepower and torque. Available in both Side Feed and Top Feed Styles. Check out our wesbite for more pictures and details! Click Your Fuel Rail Style Below To Read More On The PERRIN Web Site Top Feed 2002-2007 Top Feed 2008-2010 Side Feed 2004-2006 Last edited by PERRIN; 03-25-2010 at 01:40 PM. |
03-23-2010, 07:20 PM | #4 |
Former Vendor
Vendor Sales Rating: (10)
Member#: 6776
Join Date: May 2001
Chapter/Region:
NWIC
|
Want a cohesive package that works together for huge power increases?
Check out our Staged Power Packages! Stage 1 Retune your Subaru to where it should have been from the factory. Most 2.5l WRX's will see gains of 50-60ft-lbs and 30-40hp, most STI's will see gains of 40-50ft-lbs and 30-40hp. The power is great but not the whole story, your Subaru will feel smoother, run better and see better mileage (depends on driver). All this power with OEM levels of sound and comfort. So if you want a sleeper with no clues to the hot rod you have, you NEED the PERRIN Performance Stage 1 for your WRX or STI. Click Your Car Below To Check It Out On The PERRIN Web Site ........... Stage 1 08-10 STI ......................... Stage 1 08-10 WRX ........... ........... Stage 1 06-07 STI ......................... Stage 1 04-05 STI ........................ Stage 1 06-07 WRX ............ Stage 2 Coming Soon! ...... Last edited by PERRIN; 06-11-2010 at 01:52 PM. |
03-28-2010, 12:20 AM | #10 |
Scooby Guru
Member Sales Rating: (56)
Member#: 45574
Join Date: Oct 2003
Chapter/Region:
SCIC
Location: San-Joe-Say
Vehicle:2004 CRP SG5 FXT 1998 Bright blue GM4 |
I need two downpipe gaskets for the two piece downpipe you guys have.
Its the one that goes where the oval flange is, in between the front and rear section of the downpipe. |
06-02-2010, 08:01 PM | #13 |
Former Vendor
Vendor Sales Rating: (10)
Member#: 6776
Join Date: May 2001
Chapter/Region:
NWIC
|
All PERRIN Intakes In Stock Now & Ready For Your Subaru!
Intakes Wanting to extract more power from your Subaru? Then one of the FIRST engine modifications to choose is a free flowing intake. PERRIN leads the pack on design and performance with our systems for all WRXs and STIs. Our Intake systems are tested to insure proper air/fuel ratios on stock tuned vehicles with no check engine lights or lean mixture issues. Easy to install with simple hand tools makes this a great first addition to your performance path! Click Your Car Below To Check Out Your Specific Intake 2002-2007 STI & WRX Cold Air 2002-2007 STI & WRX Short Ram 2008-2010 STI & WRX Cold Air |
06-05-2010, 07:05 AM | #16 |
Scooby Newbie
Member Sales Rating: (0)
Member#: 243740
Join Date: Apr 2010
Chapter/Region:
NWIC
Location: The United States
Vehicle:2008 Stg 2 WRX Sedan 79 Vette |
Currently deployed overseas, been doing A LOT of research on what and where Im going to spend some of my cash when I finally get home. Defiantly looking at going with your down pipe and Stealth dual Exhaust. Do you know of where I can get some sound clips of the combo on an 08 WRX? I want to be absolutely positive on the sound Im getting from my hard earned cash. Looking for a low rumble and not that High pitched rattle can sound. Any help would be greatly appreciated...thanks
|
06-05-2010, 02:18 PM | #17 |
Scooby Newbie
Member Sales Rating: (0)
Member#: 245074
Join Date: Apr 2010
Location: Clifton Park, NY
Vehicle:2008 WRX stg 2 Satin White Pearl |
Infidel- I can speak from having your combo that it is a great sound, a low rumble. At WOT it certainly turns heads.
Well worth the money |
06-06-2010, 06:34 PM | #19 | |
Former Vendor
Vendor Sales Rating: (10)
Member#: 6776
Join Date: May 2001
Chapter/Region:
NWIC
|
Quote:
For a video clip CLICK HERE then click on the "Videos" tab I think you like it, its a deep tone like what you're looking for. Thanks |
|
06-06-2010, 06:36 PM | #20 |
Former Vendor
Vendor Sales Rating: (10)
Member#: 6776
Join Date: May 2001
Chapter/Region:
NWIC
|
Top Mount Intercoolers Are In Stock
The more power you make with a turbo, the more heat you create. The air that comes out of a turbo is hot for a couple reasons. 1.) The part that it flows through is connected to the HOT exhaust. 2.) When air is compressed it heats up (I wont go into details on that, you should have been awake during science class). To counter this the factory has installed a small intercooler on top of the engine. The size of the factory intercooler REALLY HURTS the performance of your WRX, especially in hotter weather. To counter this PERRIN has designed a LARGE Top Mount Intercooler (TMIC) that has the cooling capacity to overcome the normal heat soak situation. Along with more cooling the PERRIN TMIC flows better due to the precision cast end tanks and the high flowing nature of the bar and plate core. Click The Part Below To Check It Out On The PERRIN Web Site Top Mount Intercooler For 2008-2010 WRX & 2005-2008 Legacy GT |
06-08-2010, 12:23 PM | #21 |
Former Vendor
Vendor Sales Rating: (10)
Member#: 6776
Join Date: May 2001
Chapter/Region:
NWIC
|
Light Weight Crank Pulleys In Stock
Does this part REALLY work? We get asked that every day, I say, "just ask the THOUSANDS OF HAPPY CUSTOMERS." The Light Weight Crank Pulley is our number one selling product (units sold). It works because it is simple and makes sense, lighten up the rotating assembly and you increase throttle response, free up horse power and as a by-product reduce lag. The Light Weight Crank Pulley fits all modern Subaru 4 cylinder engines. Click Below To Check This Part Out On The PERRIN Web Site Light Weight Crank Pulley Last edited by PERRIN; 07-02-2010 at 11:26 AM. |
06-09-2010, 12:13 AM | #22 |
Scooby Newbie
Member Sales Rating: (6)
Member#: 45019
Join Date: Oct 2003
Chapter/Region:
MWSOC
Location: Hoffman Estates, IL
|
I took advantage of the black intake sale along with a cleaning kit and Perrin went the extra mile for me. Can't wait to install it this weekend! Thanks again!
ps - That crank pulley is VERY tempting at that price. Might have to sneak that under the wifes radar. |
06-09-2010, 12:06 PM | #23 | |
Former Vendor
Vendor Sales Rating: (10)
Member#: 6776
Join Date: May 2001
Chapter/Region:
NWIC
|
Quote:
We have a pulley in stock just for you its small and easy to sneak by the wife. Thanks so much |
|
06-11-2010, 11:51 AM | #24 |
Former Vendor
Vendor Sales Rating: (10)
Member#: 6776
Join Date: May 2001
Chapter/Region:
NWIC
|
Many of you have asked, so ......
Special PERRIN Performance 2010 WRX Maps Now Available CLICK HERE! We send a special PERRIN Performance map with every AccessPORT purchase! ............. Sedan Stage 2 ............................ Hatchback Stage 2 ............................ Stage 1 All .................. Last edited by PERRIN; 06-11-2010 at 01:08 PM. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Whiteline, Perrin, Stance, Swift, EnduraTech. Everything you need to up your handling | SpeedElement | Suspension/Brakes/Handling | 18 | 12-08-2008 05:49 PM |
Everything you need at prices that can't be beat! Don't pass this up! | maperformance | Engine/Power/Exhaust | 63 | 07-07-2007 01:13 PM |
Everything you need at prices that can't be beat! Don't pass this up! | maperformance | Suspension/Brakes/Handling | 79 | 07-07-2007 01:12 PM |
Everything you need at prices that can't be beat! Don't pass this up! | maperformance | Drivetrain | 34 | 06-22-2007 12:59 PM |
Complete Perrin GT35r Kit with Helix 860cc Injectors Everything you need! | kccobra | Engine/Power/Exhaust | 11 | 08-04-2006 10:16 AM |