|
|
|
|
Thread Tools | Display Modes |
08-27-2017, 03:21 PM | #1 |
Scooby Newbie
Member#: 473558
Join Date: Aug 2017
|
Wrx 2004 STI usdm definitions issue.
Hi,
I have a Wrx 2004 STI usdm, I successfully connect to the ECU and read the ROM image with Ecuflash but says that I don't have the definition file for the image, I try the defaults definitions that brings Ecuflash, and download the latest from romraider forums, and both doesn't work, this are the steps I follow: Steps: 1) Connect green connectors under stering wheel. 2) Turn key to position 2. 3) Test mode activated because fan cycle and check engine light flash. 4) Open Ecuflash and select vehicle DBW STi/FXT/LGT/Baja 2004. 5) Press the read from Ecu's flash memory button. 6) Hit the ok in the ignition prompt. 7) Ecuflash delay about a minute to read the memory. 8) Ecuflash reports that the operation was success then press ok. 9) Ecuflash says Unknown ROM Image because no definitions is found. Things I try: Compare a base rom found in romraider forums to the ECU's image and this is the report: [12:16:00.796] -- comparing ECU flash memory pages to image file -- [12:16:00.796] seg start len ecu CRC32 img CRC32 same? [12:16:00.812] FB01 00000000 00001000 F63093BF F63093BF YES [12:16:00.831] FB02 00001000 00001000 01CB5BF4 01CB5BF4 YES [12:16:00.844] FB03 00002000 00001000 33D8B633 F4F8FC68 NO [12:16:00.864] FB04 00003000 00001000 1EC659C8 1EC659C8 YES [12:16:00.880] FB05 00004000 00001000 B64EDA8E B64EDA8E YES [12:16:00.896] FB06 00005000 00001000 002F19F5 002F19F5 YES [12:16:00.912] FB07 00006000 00001000 D3AB16AF D3AB16AF YES [12:16:00.930] FB08 00007000 00001000 BFC3ABBB BFC3ABBB YES [12:16:01.015] FB09 00008000 00008000 B2A24627 B2A24627 YES [12:16:01.184] FB10 00010000 00010000 32D9343D AA66F7AC NO [12:16:01.356] FB11 00020000 00010000 23589DC1 23589DC1 YES [12:16:01.524] FB12 00030000 00010000 1A2445A9 1A2445A9 YES [12:16:01.692] FB13 00040000 00010000 2AE59086 0DE8E224 NO [12:16:01.860] FB14 00050000 00010000 BE726A1F 828B105C NO [12:16:02.030] FB15 00060000 00010000 E4EDF0B2 BCC589E7 NO [12:16:02.196] FB16 00070000 00010000 F352DE0A 3C94BB8E NO [12:16:02.196] interface close [12:16:02.200] interface close I want to make a re flash because the car haves randomly idle issues some times when in stationary and I want to fix the know knock problem in this model and maf scaling, the latest owner upgrade the intake with an after market kyn, other mods are down pipe and cat less. Any one can give a light on this? Can I flash the rom found in romraider forum without brick my ECU? Thanks in advance for any help.
* Registered users of the site do not see these ads.
|
08-27-2017, 07:01 PM | #2 |
Scooby Newbie
Member#: 473558
Join Date: Aug 2017
|
Hey everyone,
I will let this useful info here, the image on my ECU is a XPT2710J this internal ID corresponds to a XPT stage 2 map for the A2ZJ710J because the internal ID Ecuflash and Romraider was unable to read the ROM, the osecuroms forum have the definitions file but its in a private area and because the latest owner in US is who brought I'm screwed because I cant improve the map to fix my problems, so I send a mail to the XPT guys explaining all the situation asking for the def files its a matter of time to have luck to get the def files or get back to stock map to do this its just matter to reflash. |
05-08-2021, 03:37 PM | #3 |
Scooby Newbie
Member#: 523852
Join Date: Apr 2021
|
mayyyybe youre still subscribed...
hey I realize its a good number of years later but I'm potentially about to be in a very similar situation with the same year and model... if you're still subscribed I'd love to hear more.
I just discovered I can't pull the current tune from my car (usdm 04 sti) with the cobb ap i just bought so I'm looking into the tactrix stuff to see if I could grab the current tune data from the eeprom and be able to write it back in later. As I understand it, the def file is an xml file used to parse the eeprom data into the readable tables and metrics in the editing program is that right? Does romraider require a defintiions file at all to write the same old tune to the ecu? I imagine it doesnt.... thanks |
Thread Tools | |
Display Modes | |
|
|