Welcome to the North American Subaru Impreza Owners Club Thursday March 28, 2024
Home Forums Images WikiNASIOC Products Store Modifications Upgrade Garage
NASIOC
Go Back   NASIOC > NASIOC General > Motorsports

Welcome to NASIOC - The world's largest online community for Subaru enthusiasts!
Welcome to the NASIOC.com Subaru forum.

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, free of charge, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!

If you have any problems with the registration process or your account login, please contact us.







* As an Amazon Associate I earn from qualifying purchases. 
* Registered users of the site do not see these ads. 
Reply
 
Thread Tools Display Modes
Old 04-25-2004, 04:11 AM   #1
Oldalfaguy
Scooby Newbie
 
Member#: 45091
Join Date: Oct 2003
Chapter/Region: NESIC
Location: Torrington, CT
Vehicle:
2004 STI
Silver (Stealth)

Default STI and A stock. Now what do I do?

So I went out and won my first Novice AutoX (Dammit!). Now I'm in A stock (just read the rulebook, yawn) and don't have a clue as to what to do about understeer. I know about tire pressures and alignment (going to go to -1.5 fr and -1.0 rear, thoughts?) but is there anything else I can do to get the understeer under control? I know that I can change the front roll bar but not the rear but I don't know if that will do anything for the car. STU isn't an option right now as I don't have the moola.
Discuss amongst yourselves...
John
* Registered users of the site do not see these ads.
Oldalfaguy is offline   Reply With Quote
Sponsored Links
* Registered users of the site do not see these ads.
Old 04-25-2004, 09:22 AM   #2
makofoto
Scooby Guru
 
Member#: 25243
Join Date: Sep 2002
Chapter/Region: SCIC
Location: South Pasadena, CA
Vehicle:
2006 Legacy Outback
Blue

Default

Lots of applicable threads below .... and in the 2.5 Forum ... I believe the JDM STI has a thicker from sway bar ... they put a thinner one on for the US since they figure we can't drive ...
makofoto is offline   Reply With Quote
Old 04-25-2004, 05:33 PM   #3
afpdl
Scooby Guru
 
Member#: 26361
Join Date: Oct 2002
Chapter/Region: TXIC
Location: Sugar Land (Houston), Tx
Vehicle:
My shenanigans are
cheeky and fun

Default

Quote:
Originally posted by makofoto
I believe the JDM STI has a thicker from sway bar ... they put a thinner one on for the US since they figure we can't drive ...
Nope they use to put a thinner one in the jdm sti now they put the same as the USDM sti.

Bigger front sway bar will reduce ultimate front end grip but will make the car transfer better and keep a better camber curve.

Shocks can help alot if you get them valved right, but since your a novice autoxer what will help most is to autox more.
afpdl is offline   Reply With Quote
Old 04-25-2004, 06:52 PM   #4
Redneck Ricer
Scooby Specialist
 
Member#: 21458
Join Date: Jul 2002
Chapter/Region: NESIC
Location: Boston, Massachusett
Vehicle:
2011 Jeep
Smurf Blue

Default

tires, tires, tires, nice sticky ones
in A stock you can run r compounds, something to consider.... but.. since you are tlaking about money (or lack there of) it may not be good. most likely you will need second set of wheels, then tires, and looking at $1500 or so..

p-rex
Redneck Ricer is offline   Reply With Quote
Old 04-25-2004, 07:29 PM   #5
Watkinsm3
Scooby Newbie
 
Member#: 51740
Join Date: Jan 2004
Location: On an autox course in PA
Vehicle:
2004 STi A-Stock #24
Same as my Coffee : Black

Default

Quote:
Originally posted by afpdl

Bigger front sway bar will reduce ultimate front end grip
I don't agree with this...


-Matt
Watkinsm3 is offline   Reply With Quote
Old 04-25-2004, 08:40 PM   #6
afpdl
Scooby Guru
 
Member#: 26361
Join Date: Oct 2002
Chapter/Region: TXIC
Location: Sugar Land (Houston), Tx
Vehicle:
My shenanigans are
cheeky and fun

Default

Quote:
Originally posted by Watkinsm3
I don't agree with this...


-Matt
Pretty sure it does on an ideal chassy but since we lose camber with body roll its a bit tricky to find the ideal size bar.
afpdl is offline   Reply With Quote
Old 04-26-2004, 09:18 AM   #7
Watkinsm3
Scooby Newbie
 
Member#: 51740
Join Date: Jan 2004
Location: On an autox course in PA
Vehicle:
2004 STi A-Stock #24
Same as my Coffee : Black

Default

Quote:
Originally posted by afpdl
since we lose camber with body roll
There ya go!

Quote:
Originally posted by afpdl
its a bit tricky to find the ideal size bar.
It may not be fun... it may not be cheap...
Test... test... test...




Or you could just wait for someone else to do the testing and hope A) they'll share the info B) the info they share is accurate.


-Matt
Watkinsm3 is offline   Reply With Quote
Old 04-26-2004, 10:26 AM   #8
WRX_Mundi
Scooby Specialist
 
Member#: 33270
Join Date: Feb 2003
Chapter/Region: NWIC
Location: Boise, ID
Vehicle:
2004 STi
WR Blue

Default

Slow in, fast out. It is possible you're driving the car just right at one of your first events, but that doesn't seem to be usual in autocrossing. First, get a good alignment. Then work on driving. If you want to spend some money on the car, that's fine, but realize that you'll get more time from working on the driver.

I just did an autocross and rode in two other STis (who both ran novice last year). Their biggest problem was going too fast in the corners, leading to various degrees of scrubbing and pushing, which means they can't get back on the throttle coming out (they also didn't unwind and back off). I think corner exit is our car's huge advantage over the others, and if you're going too fast in the corner, you just push out on the exit which means you can't get on the throttle. This isn't the car, in my opinion -- heck, my loosy goosy Miata would do it if you went into a tight corner too fast. Number two for them would be looking ahead -- that cuts down on extrenuous steering inputs and exiting a corner pointing in the wrong direction.

I'm trying to be helpful. I found my stock STi with a good alignment to be pretty nice. It didn't rotate, but it did nice drifts under power. The only time I recall it plowing was when the driver (me) screwed up and didn't slow down enough for the corner. Amazing how much times drop when you can go just slow enough in the slow parts and fast in the fast parts.

Regarding alignment, do some searches. Didn't some of the national guys in WRXs run 0 toe front and some toe out in rear to help it rotate? Max front camber -- mine only made it to -1.2 stock. Obviously max caster.
WRX_Mundi is offline   Reply With Quote
Old 04-26-2004, 10:42 AM   #9
jmott
Scooby Guru
 
Member#: 6713
Join Date: May 2001
Chapter/Region: TXIC
Location: Houston TX USA
Vehicle:
2007 Prius
brown

Default

camber loss due to body roll:

as the wheels move up in the wheel wells, they get MORE negative camber.

which is what happens to the outside tire

which is what you want, yes?


so why is there loss of negative camber due to body roll?
jmott is offline   Reply With Quote
Old 04-26-2004, 10:44 AM   #10
Watkinsm3
Scooby Newbie
 
Member#: 51740
Join Date: Jan 2004
Location: On an autox course in PA
Vehicle:
2004 STi A-Stock #24
Same as my Coffee : Black

Default

Quote:
Originally posted by WRX_Mundi
Slow in, fast out. It is possible you're driving the car just right at one of your first events, but that doesn't seem to be usual in autocrossing. First, get a good alignment. Then work on driving. If you want to spend some money on the car, that's fine, but realize that you'll get more time from working on the driver.

I just did an autocross and rode in two other STis (who both ran novice last year). Their biggest problem was going too fast in the corners, leading to various degrees of scrubbing and pushing, which means they can't get back on the throttle coming out (they also didn't unwind and back off). I think corner exit is our car's huge advantage over the others, and if you're going too fast in the corner, you just push out on the exit which means you can't get on the throttle. This isn't the car, in my opinion -- heck, my loosy goosy Miata would do it if you went into a tight corner too fast. Number two for them would be looking ahead -- that cuts down on extrenuous steering inputs and exiting a corner pointing in the wrong direction.
Not sure I could have said it better...


As for the stock alignment... can we change caster on a stock STi suspension? I was under the impression that it was not adjustable.



-Matt (Still a scooby-noob)
Watkinsm3 is offline   Reply With Quote
Old 04-26-2004, 11:05 AM   #11
Watkinsm3
Scooby Newbie
 
Member#: 51740
Join Date: Jan 2004
Location: On an autox course in PA
Vehicle:
2004 STi A-Stock #24
Same as my Coffee : Black

Default

Quote:
Originally posted by jmott
camber loss due to body roll:

as the wheels move up in the wheel wells, they get MORE negative camber.

which is what happens to the outside tire

which is what you want, yes?


so why is there loss of negative camber due to body roll?
with the strut style suspension the amount of camber gain through compression is so small compared to roll over due to body motion. This is obvious from tire wear (i just corded two victoracers up front this weekend)... why? they corded on the front and the VERY outside edge was what went (about a half inch from the line that sperates the sidewall from the tread. The insides are near full tread. So the concept behind it is to help keep the tire flat in the corners with the limited negative camber gain (this ain't no double wish bone!!!). How do you do that? reduce body roll. How do you reduce body roll up front in stock? Massive stiffening of the front rollbar. Test different settings till you find the optimal balance between stiffness and contact patch.

If you get it right... the car should loosen up on turn in... exactly where it needs it. I'm still testing these things but I believe the theory sound. I believe that some of the FWD stock tuning techniques (such as a smaller front bar) should NOT be used with the STi. The vehicle should be treated as a strut equiped RWD car for setup purposes.

Adjustable front bar should be on the car next week... combined with an alignment this week (with weekend testing in between). We shall see... I'll have good benchmark drivers both weekends to help figure if an advantage was achieved. Then, of course, DC at the end of may.

-Matt
Watkinsm3 is offline   Reply With Quote
Old 04-26-2004, 11:07 AM   #12
skuttledude
Scooby Specialist
 
Member#: 738
Join Date: Jan 2000
Chapter/Region: MWSOC
Location: Southern Ohio USA
Default

Quote:
Originally posted by WRX_Mundi
Slow in, fast out. It is possible you're driving the car just right at one of your first events, but that doesn't seem to be usual in autocrossing. First, get a good alignment. Then work on driving. If you want to spend some money on the car, that's fine, but realize that you'll get more time from working on the driver.

I just did an autocross and rode in two other STis (who both ran novice last year). Their biggest problem was going too fast in the corners, leading to various degrees of scrubbing and pushing, which means they can't get back on the throttle coming out (they also didn't unwind and back off). I think corner exit is our car's huge advantage over the others, and if you're going too fast in the corner, you just push out on the exit which means you can't get on the throttle. This isn't the car, in my opinion -- heck, my loosy goosy Miata would do it if you went into a tight corner too fast. Number two for them would be looking ahead -- that cuts down on extrenuous steering inputs and exiting a corner pointing in the wrong direction.

I'm trying to be helpful. I found my stock STi with a good alignment to be pretty nice. It didn't rotate, but it did nice drifts under power. The only time I recall it plowing was when the driver (me) screwed up and didn't slow down enough for the corner. Amazing how much times drop when you can go just slow enough in the slow parts and fast in the fast parts.


Perfectly said.
I found the plowing to be true this past Saturday on a fairly slow AutoX course with sweping 180degree turns. Lots of fun. Times kept coming down as I was trying to get in the corners SLOWER and get on the gas little earlier and full power.

What really helped me was having an experienced Subaru RS owner show me this in my own car. He killed my time 2 months ago as he drove it way faster than me but really showed me the slow in fast out thing. (IMHO, is very hard to control as I want to go in hotter)

Suggestion: full rear DCCD lock helped for me. (weather was 70 degrees and dry)

Rally On,

Davis
skuttledude is offline   Reply With Quote
Old 04-26-2004, 12:22 PM   #13
jmott
Scooby Guru
 
Member#: 6713
Join Date: May 2001
Chapter/Region: TXIC
Location: Houston TX USA
Vehicle:
2007 Prius
brown

Default

gotcha

would be interesting to do some testing to see at what point more front roll stiffness starts to hurt grip more than help.

Im planning on getting that "geez" device so I can do stuff like that with my new toy.


Quote:
Originally posted by Watkinsm3
with the strut style suspension the amount of camber gain through compression is so small compared to roll over due to body motion. This is obvious from tire wear (i just corded two victoracers up front this weekend)... why? they corded on the front and the VERY outside edge was what went (about a half inch from the line that sperates the sidewall from the tread. The insides are near full tread. So the concept behind it is to help keep the tire flat in the corners with the limited negative camber gain (this ain't no double wish bone!!!). How do you do that? reduce body roll. How do you reduce body roll up front in stock? Massive stiffening of the front rollbar. Test different settings till you find the optimal balance between stiffness and contact patch.

If you get it right... the car should loosen up on turn in... exactly where it needs it. I'm still testing these things but I believe the theory sound. I believe that some of the FWD stock tuning techniques (such as a smaller front bar) should NOT be used with the STi. The vehicle should be treated as a strut equiped RWD car for setup purposes.

Adjustable front bar should be on the car next week... combined with an alignment this week (with weekend testing in between). We shall see... I'll have good benchmark drivers both weekends to help figure if an advantage was achieved. Then, of course, DC at the end of may.

-Matt
jmott is offline   Reply With Quote
Old 04-26-2004, 12:34 PM   #14
kwh29
Scooby Specialist
 
Member#: 22100
Join Date: Jul 2002
Chapter/Region: South East
Location: Durham, NC
Default

Quote:
Originally posted by jmott
would be interesting to do some testing to see at what point more front roll stiffness starts to hurt grip more than help.
It appears that it's not possible to get a big enough front bar in _stock_. I am still considering having a HUGE (like 30mm!) bar custom made just to find out for certain.

--Kevin H.
kwh29 is offline   Reply With Quote
Old 04-26-2004, 12:47 PM   #15
makofoto
Scooby Guru
 
Member#: 25243
Join Date: Sep 2002
Chapter/Region: SCIC
Location: South Pasadena, CA
Vehicle:
2006 Legacy Outback
Blue

Default

The Hotchkis bar is 1 inch ... 25.4 mm ... but hollow ... so equal to more like 23 mm. It helps ... but is no substitute for stiffer springs/coil overs ...
makofoto is offline   Reply With Quote
Old 04-26-2004, 12:59 PM   #16
MonoSki
Scooby Newbie
 
Member#: 9377
Join Date: Aug 2001
Default

1a- Don't forget this is supposed to be fun
1b- Evolution Driving School - or something like it
2- Race tires
3- Alignment
4- Shocks
5- Bigger front bar
MonoSki is offline   Reply With Quote
Old 04-26-2004, 01:09 PM   #17
FSelekler
Scooby Newbie
 
Member#: 41410
Join Date: Aug 2003
Chapter/Region: MAIC
Vehicle:
2006 987-120
Atlas Gray

Default

Quote:
Originally posted by Watkinsm3
I don't agree with this...


-Matt
Yep, I am with Matt on this. We have done some testing with graphed results if you are interested:

http://www.selgp.com/sti_modifications.htm
FSelekler is offline   Reply With Quote
Old 04-26-2004, 01:13 PM   #18
Watkinsm3
Scooby Newbie
 
Member#: 51740
Join Date: Jan 2004
Location: On an autox course in PA
Vehicle:
2004 STi A-Stock #24
Same as my Coffee : Black

Default

Quote:
Originally posted by makofoto
The Hotchkis bar is 1 inch ... 25.4 mm ... but hollow ... so equal to more like 23 mm. It helps ... but is no substitute for stiffer springs/coil overs ...
Ah... but without the springs/coil overs option in A-Stock we're left with one lonely solution... front bar please!


As for the bar I'm experimenting with? Its BIG... Its adjustable...

-Matt
Watkinsm3 is offline   Reply With Quote
Old 04-26-2004, 01:22 PM   #19
MonoSki
Scooby Newbie
 
Member#: 9377
Join Date: Aug 2001
Default

quote:
Originally posted by afpdl

Bigger front sway bar will reduce ultimate front end grip


I don't agree with this...


-Matt

Bigger front bar reduces steady state grip but increases transitional grip. most autox's these days are all about transitions. what you make up there is more than you might loose on the few sweepers.
better damped shocks will help on the sti as it is underdamped to beging with
MonoSki is offline   Reply With Quote
Old 04-26-2004, 01:23 PM   #20
Watkinsm3
Scooby Newbie
 
Member#: 51740
Join Date: Jan 2004
Location: On an autox course in PA
Vehicle:
2004 STi A-Stock #24
Same as my Coffee : Black

Default

Quote:
Originally posted by FSelekler
Yep, I am with Matt on this. We have done some testing with graphed results if you are interested:
You don't happen to have the average/mean G loads for those turns do you? Somewhat unimportant since the raw times tell a good deal but, average constant loads are tell a great story compared to peak loads.

Good and interesting info!

-Matt
Watkinsm3 is offline   Reply With Quote
Old 04-26-2004, 01:28 PM   #21
Watkinsm3
Scooby Newbie
 
Member#: 51740
Join Date: Jan 2004
Location: On an autox course in PA
Vehicle:
2004 STi A-Stock #24
Same as my Coffee : Black

Default

Quote:
Originally posted by MonoSki
Bigger front bar reduces steady state grip but increases transitional grip. most autox's these days are all about transitions. what you make up there is more than you might loose on the few sweepers.
better damped shocks will help on the sti as it is underdamped to beging with
An your data is where? I seriously hope this is not just a "bigger front bar induces understeer" generalization. Check out FSelekler's link when you get a chance... shocking!

NOTHING... beats real world testing (with a good driver in a consistent eviroment... blah, blah, blah). BUT... if you still believe you're right you are MORE than welcome to run this other setup in Topeka... I won't stop you... in fact, I only encourage you to!

-Matt
Watkinsm3 is offline   Reply With Quote
Old 04-26-2004, 02:20 PM   #22
FSelekler
Scooby Newbie
 
Member#: 41410
Join Date: Aug 2003
Chapter/Region: MAIC
Vehicle:
2006 987-120
Atlas Gray

Default

Quote:
Originally posted by Watkinsm3
You don't happen to have the average/mean G loads for those turns do you? Somewhat unimportant since the raw times tell a good deal but, average constant loads are tell a great story compared to peak loads.

Good and interesting info!

-Matt
LOL, amazing you are the first one to notice and ask for that

Yes, we have that data, but we did not publish it at our site as we have to protect some part of the data that we use internally. It is just too easy for other vendors to grab data and run with it

As you stated, it does not make much difference from the end result perspective, but it is the kind of data we actually need to do development for various combination of products.
FSelekler is offline   Reply With Quote
Old 04-26-2004, 02:41 PM   #23
Watkinsm3
Scooby Newbie
 
Member#: 51740
Join Date: Jan 2004
Location: On an autox course in PA
Vehicle:
2004 STi A-Stock #24
Same as my Coffee : Black

Default

Quote:
Originally posted by FSelekler

Yes, we have that data, but we did not publish it at our site as we have to protect some part of the data that we use internally. It is just too easy for other vendors to grab data and run with it
Ah! Makes sense... I just put 2 & 2 together and connected that page with the rest of the site! You guys have some good info in there. I was looking over your info when I first got my STi about 4+ months ago.


-Matt
Watkinsm3 is offline   Reply With Quote
Old 04-26-2004, 02:54 PM   #24
FSelekler
Scooby Newbie
 
Member#: 41410
Join Date: Aug 2003
Chapter/Region: MAIC
Vehicle:
2006 987-120
Atlas Gray

Default

Thank you Matt, I appreciate

Last edited by FSelekler; 04-26-2004 at 03:18 PM.
FSelekler is offline   Reply With Quote
Old 04-26-2004, 03:30 PM   #25
jmott
Scooby Guru
 
Member#: 6713
Join Date: May 2001
Chapter/Region: TXIC
Location: Houston TX USA
Vehicle:
2007 Prius
brown

Default

Quote:
Originally posted by FSelekler
Thank you Matt, I appreciate
what data logging tool did you use? do you reccomend it?
jmott is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Running a crazy tune right now. What should I do? WrxRick AccessPort 8 06-18-2007 05:16 PM
o man, now what did i do BlowDro Newbies & FAQs 36 02-16-2007 04:50 PM
There are no mods in here right now, what can we do?? rice h8r Off-Topic 23 01-19-2007 06:08 AM
Finally got a website...now what the hell do I do?! STR8OUT Off-Topic 45 10-14-2004 01:07 PM

All times are GMT -4. The time now is 04:16 AM.


Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Powered by Searchlight © 2024 Axivo Inc.
Copyright ©1999 - 2019, North American Subaru Impreza Owners Club, Inc.

As an Amazon Associate I earn from qualifying purchases.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission
Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.