|
|
|
|
Thread Tools | Display Modes |
10-11-2012, 01:26 AM | #26 |
Scooby Guru
Member#: 14732
Join Date: Jan 2002
Chapter/Region:
SWIC
Location: Global
|
So tonight Ken and I drilled out 2 broken bolts on my brembos and Helicoils all the mounting holes so i will not have to worry about the bolts getting stuck again (since it seems to happen a lot) In the next day or 2 i will drop them off to my powder coater
Brembo Mounting holes Front M12x1.5 Rear M10x1.5
* Registered users of the site do not see these ads.
|
10-11-2012, 01:44 AM | #27 |
Scooby Specialist
Member#: 251804
Join Date: Jul 2010
Chapter/Region:
SWIC
Location: Gilbert, AZ
Vehicle:05 WRB STi |
I thought Ken died, good to see you alive Ken |
10-11-2012, 03:12 AM | #28 |
Scooby Specialist
Member#: 168774
Join Date: Jan 2008
Chapter/Region:
SWIC
Location: phoenix, az
|
You've got 19 days to finish this, better get going.
|
10-16-2012, 12:10 PM | #29 |
Scooby Specialist
Member#: 23123
Join Date: Aug 2002
Chapter/Region:
SWIC
Location: Gilbert, AZ
Vehicle:15 WRX 6MT 07 Legacy SpecB |
19??!
|
10-16-2012, 12:24 PM | #30 |
Scooby Guru
Member#: 14732
Join Date: Jan 2002
Chapter/Region:
SWIC
Location: Global
|
|
10-16-2012, 12:26 PM | #31 |
Scooby Specialist
Member#: 251804
Join Date: Jul 2010
Chapter/Region:
SWIC
Location: Gilbert, AZ
Vehicle:05 WRB STi |
|
10-16-2012, 12:42 PM | #32 |
Scooby Guru
Member#: 120273
Join Date: Jul 2006
Chapter/Region:
SWIC
Location: AZ
Vehicle:06 WRBWRXWGN Now with 100% more Spec-C |
|
10-16-2012, 02:20 PM | #33 |
Scooby Specialist
Member#: 146496
Join Date: Apr 2007
Chapter/Region:
SWIC
Location: Tempe, AZ
Vehicle:02 WRX Wagon 2.1L Built not bought. #0003 |
|
10-16-2012, 09:32 PM | #34 |
Scooby Newbie
Member#: 176944
Join Date: Apr 2008
Chapter/Region:
SWIC
Location: Mesa, Az
Vehicle:06 STI Aspen White |
How did the heil-coils work out for you? Those things saved my a** when one of the timing belt tensioner bolt threads stripped out on my girlfriend's engine.
|
10-16-2012, 10:18 PM | #35 |
Scooby Guru
Member#: 14732
Join Date: Jan 2002
Chapter/Region:
SWIC
Location: Global
|
|
10-17-2012, 12:11 AM | #36 |
Scooby Specialist
Member#: 211224
Join Date: May 2009
Chapter/Region:
RMIC
Location: Aurora, CO
Vehicle:2005 Saabaru Who knows |
Is about f***ing time you get on this project and make it a true lezbo wagon!
|
10-18-2012, 05:39 PM | #37 |
Scooby Newbie
Member#: 299658
Join Date: Nov 2011
Chapter/Region:
SWIC
Location: AZ
Vehicle:2011 WRX Satin White Pearl |
I love that model gen of forester lowered. You converting from Auto to manual? So hard to find XT's in manual...
|
10-18-2012, 05:44 PM | #38 |
Scooby Specialist
Member#: 168774
Join Date: Jan 2008
Chapter/Region:
SWIC
Location: phoenix, az
|
|
10-18-2012, 05:55 PM | #39 |
Scooby Newbie
Member#: 299658
Join Date: Nov 2011
Chapter/Region:
SWIC
Location: AZ
Vehicle:2011 WRX Satin White Pearl |
|
10-21-2012, 01:08 PM | #40 |
Scooby Specialist
Member#: 174695
Join Date: Mar 2008
Chapter/Region:
MWSOC
Location: Cave Creek, AZ
Vehicle:1983 antarctic blue super sportswagon |
i saw this thing on CL a while ago. i wanted to buy it but couldn't convince myself to sell my car to go forward. i'm jealous.
|
10-21-2012, 01:15 PM | #41 |
Scooby Guru
Member#: 14732
Join Date: Jan 2002
Chapter/Region:
SWIC
Location: Global
|
|
10-24-2012, 09:56 PM | #42 |
Scooby Guru
Member#: 14732
Join Date: Jan 2002
Chapter/Region:
SWIC
Location: Global
|
So today i decided to do my Viper alarm/remote start,
Points if you are going to do this on your own car 1 - Get a proper wiring diagram. 2 - Get some tools - cutters, el. tape , etc. 3 - READ INSTRUCTIONS !!!!!!! 4 - Multimeter (if you really understand what you are looking at, you can use a test light) Viper 5901 Wiring into my 2008 Forester XT (5 speed) (DO NOT USE THIS WIRING FOR ANOTHER CAR) H3 harness (10 pin connector) Pink - Ignition - to Black (key side) or Green (car side) wire on ignition switch Red/White - 12+ constant - to Black/White stripe (key side) or white (car side) at ignition switch Orange - Accessory 1 - to Black/Blue (key side) or Yellow (car side) at ignition switch Red - 12+ constant - to Black/White stripe (key side) or white (car side) at ignition switch Pink/White - Ignition 2 - to Pin 85 of Relay Red/Black - 12v constant - to Black/White stripe (key side) or white (car side) at ignition switch Starter wire you need to Cut Violet - Starter 1 - to KEY Side of Black/Yellow (key side) or White/blue (car side) Green - Starter 1 - to STARTER Side of Black/Yellow (key side) or White/blue (car side) Relay to bypass clutch during remote start only Wire Pin 85 of Relay to Pink/White - Ignition 2 (see above in H3 harness) Wire Pin 86 of Relay to Ground Wire Pin 30 of Relay to Clutch wire A (Clutch wires are above the clutch pedal) White plug Wire Pin 87 of Relay to Clutch wire B (Clutch wires are above the clutch pedal) White plug H1 harness (12 pin connector) Red - To 12+ constant Brown - To + on Siren Black - To chassis ground Green - Door Trigger input - (diode isolate if you have multiple door triggers) (Drivers door trigger blue/orange at BIU, all other doors yellow at BIU in gray 20 pin plug) White - Parking light output - (Orange/black wire at parking light switch) H2 harness (18 pin connector) Violet/white - Tachometer input (Green wire in 24 pin plug above fuse box) Dark Blue - (Blue wire from 556u bypass) Grey - Hood pin ( Mount hood pin and connect) Brown - Brake shutdown (White/black at brake switch) Black/White - Neutral Safety Wire ( Green/black at ECU in 35 pin plug) (this is so your car will NOT start if left in gear) Door lock harness (3 pin) Blue - Unlock output (Yellow/Red at BIU in gray 20 pin plug) Green - Lock output (Red/White at BIU in gray 20 pin plug) |
10-26-2012, 01:10 AM | #43 |
Scooby Newbie
Member#: 312924
Join Date: Mar 2012
|
this is ncie. I approve
|
10-26-2012, 01:31 AM | #44 |
Scooby Guru
Member#: 120273
Join Date: Jul 2006
Chapter/Region:
SWIC
Location: AZ
Vehicle:06 WRBWRXWGN Now with 100% more Spec-C |
Great. Now install one in my car.
|
10-26-2012, 01:44 AM | #45 |
Scooby Guru
Member#: 14732
Join Date: Jan 2002
Chapter/Region:
SWIC
Location: Global
|
|
10-26-2012, 02:12 AM | #46 |
Scooby Newbie
Member#: 176944
Join Date: Apr 2008
Chapter/Region:
SWIC
Location: Mesa, Az
Vehicle:06 STI Aspen White |
Wow dude, that's a very detailed write-up, nice job!
|
10-26-2012, 09:13 AM | #47 |
Scooby Newbie
Member#: 296879
Join Date: Oct 2011
Chapter/Region:
SWIC
Location: Fallon, NV
Vehicle:2003 Impreza WRX Sonic Yellow |
very nice, looking forward to seeing what happens after SEMA.
|
10-26-2012, 04:46 PM | #48 |
Scooby Specialist
Member#: 59577
Join Date: Apr 2004
Chapter/Region:
SWIC
Location: N. Central PHX
Vehicle:04 fxt notansti s2000 reallynotthatfast |
The rear of that car would look so friggin sweet debadged....
Did you get the cargo cover yet? |
10-26-2012, 05:00 PM | #49 | |
Scooby Guru
Member#: 14732
Join Date: Jan 2002
Chapter/Region:
SWIC
Location: Global
|
Quote:
Rear of car will be debadged (well the trim piece with the emblem anyway) i started working on it yesterday and will post pics once i get it done (if i like how it comes out) |
|
10-26-2012, 05:27 PM | #50 |
Scooby Guru
Member#: 14732
Join Date: Jan 2002
Chapter/Region:
SWIC
Location: Global
|
Just noticed that my thread title was edited, ****ing hate this forum these days
thinking about just deleting everything and saying forget it |
Thread Tools | |
Display Modes | |
|
|