|
|
|
|
Thread Tools | Display Modes |
10-13-2016, 08:49 PM | #1 |
Scooby Specialist
Member#: 293162
Join Date: Sep 2011
Chapter/Region:
MAIC
Location: Virginia
Vehicle:2006 Forester STi SGM |
Help Tuning AEM 3.5 bar Map Sensor
Last thing I need to do to get my car up and running is to scale the map sensor and of course it want s to be difficult.
After over a week of searching I figure I need to ask my subie brethren. I have an 06 forester and Im trying to scale the map sensor with ye old accesstuner race software. The problem Im having is that the numbers simply don't add up. Here are the stock calibrations: Im trying to input these values which I found posted by other forum members to be the correct scaling: Multiplier = 12.6875 Offset = -6.34375 But once input the highest it will go is to this: Multiplier = 1.379 Offset = -1.379 Am I looking at the wrong option within the software or do I need to convert these values to a different format? Thanks in advance for any help. By the way Ive contacted a tuner which I will not name to avoid ruining a rep and for some reason even after several attempts even offering to pay in advance I can seem to get a response to get a break in map so that's why Im trying to do this myself to get it going to the point I can get the car running to get it to a shop for proper tuning. |
Thread Tools | |
Display Modes | |
|
|