|
|
|
|
Thread Tools | Display Modes |
07-28-2012, 04:49 PM | #1 |
Scooby Specialist
Member#: 36450
Join Date: May 2003
Chapter/Region:
SWIC
Vehicle:2003 WRX PSM |
Delrin bushing fabrication
Any suggestions on where I might be able to have some rear end link bushings machined from Delrin in the Phoenix area?
* Registered users of the site do not see these ads.
|
07-29-2012, 10:09 AM | #2 |
Scooby Newbie
Member#: 321690
Join Date: May 2012
Location: Chandler
Vehicle:2009 STi hatchback white |
I might be able to help out, do you have material? I have access to machine shop equipment and am not an expert machinist but for non complicated designs I do ok. Not familiar with the end link bushings, if they are more or less cylindrical in shape it should be no problem.
|
07-29-2012, 05:22 PM | #3 |
Scooby Specialist
Member#: 36450
Join Date: May 2003
Chapter/Region:
SWIC
Vehicle:2003 WRX PSM |
No, I don't have the material.. I was hoping I could find a place that could just make them if i supplied the specs..
|
Thread Tools | |
Display Modes | |
|
|