|
|
|
|
Thread Tools | Display Modes |
01-15-2004, 06:54 PM | #1 |
Scooby Newbie
Member#: 38039
Join Date: Jun 2003
Chapter/Region:
NWIC
Location: Bend, OR
Vehicle:1984 VW Westfalia with EJ25 Power |
FS: Turbo kit, suspension, EJ22T block, etc.
UPDATE 3/30/04 - See the webpage http://gladstone.uoregon.edu/~tsmith3/troyweb/
Suspension and turbo kit have been sold, EJ22T block is still available. WILL TRADE FOR NICE SLR CAMERA SETUP (prefer nikon), also possibly Playstation 2 setup, or other goodies, try me.. UPDATE 2: The turbo kit is for sale for sure. Soon2BTurbodRS has dibs, after that it's up for grabs though. I haven't done a lot of looking around yet, but this will be a very comprehensive kit (everything you need). Pics are available here: http://img20.photobucket.com/albums/...e/Turbo%20Kit/ What's not shown in the pictures is all the stuff inside the car (instrumentation). There is boost, fuel pressure, EGT, and A/F ratio. Including a 2 guage A-pillar pod. Also a big Walbro fuel pump, 55lph i think, or whatever is commonly used. There is also a nice looking catch can, i don't remember what brand it is, and can't look now. Has a mini air filter on top though, cool lookin. $2,000 for the turbo kit $500 for the EJ22T short block with a bad #4 piston and bore. I may be able to arrange for free shipping, but can not guarantee that. UPDATE: Pricing for suspension: New KYB AGX struts are $449 so i'll sell these for $250. New Ground Control springs are $389 so i'd let them go for half of that which is $190. $250 + $190 is $440, i'll sell ya the whole kit for $400, thats less than half the new price.
* Registered users of the site do not see these ads.
Last edited by Trizzle; 08-10-2004 at 01:21 AM. |
01-15-2004, 10:31 PM | #2 |
Scooby Specialist
Member#: 22879
Join Date: Aug 2002
Location: missoula , montana
|
Hmmm...so would there be a good deal on the rs with no engine?!
Brent |
01-15-2004, 11:12 PM | #3 |
Scooby Newbie
Member#: 38039
Join Date: Jun 2003
Chapter/Region:
NWIC
Location: Bend, OR
Vehicle:1984 VW Westfalia with EJ25 Power |
a good deal with no engine? no. I could sell it w/o an engine, but it wouldn't be a very good deal. I could only discount it by the amount i could sell the engine for, which would be what, like a thousand bucks or less.
Why? You thinking of dropping an EJ257 in there or something? The EJ22T (with proper fuel and management systems) can probably be just as good (better even?). |
01-17-2004, 09:47 PM | #4 |
Scooby Specialist
Member#: 21471
Join Date: Jul 2002
Chapter/Region:
Tri-State
|
Pmed
|
01-18-2004, 01:11 AM | #5 |
Scooby Specialist
Member#: 451
Join Date: Oct 1999
Chapter/Region:
NWIC
Location: Puyallup, Wa.
Vehicle:2000 Impreza 2.5RS 2008 Legacy GT Limited |
How much for the S-AFC?
|
01-18-2004, 03:48 AM | #6 |
Scooby Newbie
Member#: 38039
Join Date: Jun 2003
Chapter/Region:
NWIC
Location: Bend, OR
Vehicle:1984 VW Westfalia with EJ25 Power |
I think $200 would be fair, if i sell it. Not positive that i will be just yet.
|
01-18-2004, 03:49 AM | #7 |
Scooby Specialist
Member#: 35868
Join Date: Apr 2003
Chapter/Region:
NWIC
Location: Pdx, Or
Vehicle:06 Impreza OBS GG6 Corolla GT-S Hachi Broku |
PM'd you... I'm hoping we can work something out... I'm not too far away (20-30min drive)...
-Ben |
01-26-2004, 11:00 PM | #8 |
Scooby Specialist
Member#: 45275
Join Date: Oct 2003
Chapter/Region:
Tri-State
Location: Middletown, NY
Vehicle:2007 wrx 98 2.5rs,89 & 95 240sx's |
hey, how much for the up-pipe/downpipe, turbo. also what size turbo. intake/exhaust sizes. which crossmember and exhaust manifodl did you use also? thanks
|
01-26-2004, 11:42 PM | #9 | |
Scooby Newbie
Member#: 38039
Join Date: Jun 2003
Chapter/Region:
NWIC
Location: Bend, OR
Vehicle:1984 VW Westfalia with EJ25 Power |
Quote:
It says TB03, but i had been told it was a TD-03, anyway, it was in one of the early runs of the ludespeed stage 2 kit. It has very low miles on it, probably under 20,000, and i gave it a good look over after taking it off last weekend, everything seems good. |
|
01-27-2004, 12:33 PM | #10 |
Scooby Guru
Member#: 832
Join Date: Jan 2000
Chapter/Region:
RMIC
Location: Teh Ghetto Garage, CO
Vehicle:99 2.5RS, '85 911 '73 914 and 2012 BRZ |
Trizzle,
good thinking to keep the tech thread tech. I didn't mean to way lay that thread, so thanks for being proactive. From the other thread: "For the EJ22T short block, lets see, a new one is like 1200-1400 right, so $700 would be very fair for a used one, say a couple hundred to get this one fixed up right, i'll sell it for $500 as is. Does that seem reasonable?" Complete EJ22-T swaps out of Legacy Turbos, running and including ECU have been running $600-1000 depending on the source. Was this a block you got new? If not, I would say that block in it's current state if worth about $350. If someone was looking to do a ghetto RS-T build, just repairing the sleeve would work for that and then you could get $500 for it. But maybe not, resleeving may have decreased the value because of the extra work to remove the sleeve before overboring if someone wants a high powered build by someone like these guys: http://www.axispowerracing.net/ If someone, like I am, is interested in that kind of build, then leaving it as is and having the whole thing reworked is a better option. Personally, if I owned that block, I wouldn't do any work to it until I had found a buyer and knew what they wanted. If you still have the block in a month, I will take it off your hands, as is. Right now I can't swing it financially. I will be doing a build not dis-similar to the one linked but overbored to 99.5mm (which, with your own core would be about a grand cheaper than the listed price). It would be nice to send the block out and have it done while keeping my Legacy running. but more likely I have just provided food for thought for whatever lucky soul gets this block. |
01-27-2004, 12:41 PM | #11 |
Scooby Newbie
Member#: 38039
Join Date: Jun 2003
Chapter/Region:
NWIC
Location: Bend, OR
Vehicle:1984 VW Westfalia with EJ25 Power |
Yeah, this was a brand new shortblock, out of a crate, from subaru. Those i believe run typically a little closer to the 1300 mark. At least that's what i've seen in the past, i don't know if thats still true. I've had one offer for 250 but i'm really not motivated to sell it for much under $500. I'm in no rush, we'll see what happens after a while and if it becomes clear that noone wants it for that price, i may lower it.
|
01-27-2004, 01:39 PM | #12 |
Scooby Guru
Member#: 832
Join Date: Jan 2000
Chapter/Region:
RMIC
Location: Teh Ghetto Garage, CO
Vehicle:99 2.5RS, '85 911 '73 914 and 2012 BRZ |
Since it was a new block, I would agree, take nothing less than $500...And yes they still go for $1300-1500 new...
|
01-27-2004, 04:51 PM | #13 |
Scooby Specialist
Member#: 35868
Join Date: Apr 2003
Chapter/Region:
NWIC
Location: Pdx, Or
Vehicle:06 Impreza OBS GG6 Corolla GT-S Hachi Broku |
I'm interested in the block and turbo setup still
|
01-27-2004, 10:09 PM | #14 |
Scooby Newbie
Member#: 38039
Join Date: Jun 2003
Chapter/Region:
NWIC
Location: Bend, OR
Vehicle:1984 VW Westfalia with EJ25 Power |
update: see first post. Added pricing for struts/springs
struts: $250 springs: $190 Package: $400 |
03-25-2004, 01:02 PM | #15 |
Scooby Newbie
Member#: 38039
Join Date: Jun 2003
Chapter/Region:
NWIC
Location: Bend, OR
Vehicle:1984 VW Westfalia with EJ25 Power |
Soon2BturbodRS never showed up to check it out, it's still available.
|
03-25-2004, 03:02 PM | #16 |
Scooby Specialist
Member#: 35868
Join Date: Apr 2003
Chapter/Region:
NWIC
Location: Pdx, Or
Vehicle:06 Impreza OBS GG6 Corolla GT-S Hachi Broku |
I apologize for that. I just don't think it is going to work out for me
|
03-31-2004, 02:46 AM | #17 |
Scooby Newbie
Member#: 38039
Join Date: Jun 2003
Chapter/Region:
NWIC
Location: Bend, OR
Vehicle:1984 VW Westfalia with EJ25 Power |
|
03-31-2004, 07:37 PM | #18 |
Scooby Newbie
Member#: 9134
Join Date: Aug 2001
Chapter/Region:
NWIC
Location: Seattle, WA
Vehicle:2000 Impreza RS-T BRP w/Hydra+EJ257 |
Intersted but how much do you think it would cost to repair the block? What would i need? pistons and rods, crank? or is the crank still good?
|
03-31-2004, 07:48 PM | #19 |
Scooby Newbie
Member#: 38039
Join Date: Jun 2003
Chapter/Region:
NWIC
Location: Bend, OR
Vehicle:1984 VW Westfalia with EJ25 Power |
I'm 99% sure that the crank and rods are all fine. You'll definitely need one piston and the rings for it, and the cylinder will probably just need to be resleeved. Should be doable for 200-400? I'm not sure exactly. When i was checking into it, it wasn't as expensive as i thought it might be. Check around at your local automotive machine shops.
|
03-31-2004, 09:40 PM | #20 |
Scooby Specialist
Member#: 35868
Join Date: Apr 2003
Chapter/Region:
NWIC
Location: Pdx, Or
Vehicle:06 Impreza OBS GG6 Corolla GT-S Hachi Broku |
Troy-
The turbo is not going to work for me - my EJ22 is acting up ... I am going to want those AGXs - maybe the GCs too... I'll get back to you. -Ben |
03-31-2004, 10:05 PM | #21 |
Scooby Specialist
Member#: 34729
Join Date: Apr 2003
Chapter/Region:
NWIC
Location: Portland, OR
Vehicle:06 WRX Wagon CGM 01 2.5RS coupe white |
I'm interested in the strut/spring package. What is the drop with the springs?
Plus, do you still have your RS? If so, I recall that it had white sideskirts. Would you be willing to make a deal on those as well, trading for stock sideskirts? |
04-01-2004, 03:57 AM | #22 |
Scooby Newbie
Member#: 38039
Join Date: Jun 2003
Chapter/Region:
NWIC
Location: Bend, OR
Vehicle:1984 VW Westfalia with EJ25 Power |
I'm keeping the RS, and you can have my sideskirts when you pry them from my cold lifeless hands! LOL
The drop is adjustable by turning a threaded collar. You can set it 2" lower than stock, or 1" above stock, and everywhere in between. |
04-01-2004, 04:06 AM | #23 |
Scooby Specialist
Member#: 30798
Join Date: Dec 2002
Location: kansas city ks
Vehicle:2001 RS-T Hybrid 2.5>2.2T>257>2.35S |
pm'd you about struts/engine
|
04-01-2004, 12:31 PM | #24 |
Scooby Newbie
Member#: 38039
Join Date: Jun 2003
Chapter/Region:
NWIC
Location: Bend, OR
Vehicle:1984 VW Westfalia with EJ25 Power |
Got it.
|
04-01-2004, 03:30 PM | #25 |
Scooby Specialist
Member#: 30798
Join Date: Dec 2002
Location: kansas city ks
Vehicle:2001 RS-T Hybrid 2.5>2.2T>257>2.35S |
Pm'd you back let me know what you want to do. I can have the money to you as soon as you let me know what you want to do.
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
(Toronto) EJ251 RS-T Turbo Kit ~ FAT, VISHNU Etc. | agryguc | Private 'Wanted' Classifieds | 0 | 12-19-2009 11:22 PM |
FS: MA, brand new Ej22t block | IllNastyImpreza | Private 'For Sale' Classifieds | 6 | 07-07-2006 09:27 PM |
FS: Oregon: Turbo Kit, Suspension Kit, EJ22T shortblock | Trizzle | Private 'For Sale' Classifieds | 31 | 08-29-2004 09:45 PM |
EJ22 non-turbo same as EJ22T block? | SJwrx | Normally Aspirated Powertrain | 1 | 04-16-2004 02:36 PM |
Interested in learning about a possible Impreza turbo kit in Florida/Southeast? | Overtime | South East Region Forum | 6 | 10-24-2000 09:49 PM |