|
|
|
|
Thread Tools | Display Modes |
11-21-2012, 11:51 AM | #1 |
Scooby Newbie
Member#: 329676
Join Date: Aug 2012
Chapter/Region:
E. Canada
Location: Canada
Vehicle:1999 GC8 R-STI White |
So Im Building a Track Car....
Hey all. I am starting to build up a 1999 2.5RS-T which I purchased at the end of the summer. My plan is to have a DD/track day car to use for the spring of 2012-2013. I was hoping to get some feedback from the forum on some tips which might improve the car in some way.
Thoughts: I was thinking I would go 2.5deg negative camber up front and 1.5deg negative camber in the rear, 0 toe for the front and back- as a baseline for the suspension. The car will also be corner balanced. The car is currently at 19psi on Robs 440 tune. The car sees 10.5AFR at WOT through the gears. Is it safe to run the car at 22psi- the car does have ACL race bearings (I know these models are prone to failure), apr studs, metal gaskets and a clean blueprinted and balanced rebuild Any info or tips would be great! Specs: Version 2 STI swap (rebuilt 20,000km ago) TD05H 16G Robs 440 Tune @ 19psi (10.5AFR at WOT) AEM Wideband AFR AEM Boost Gauge Hallmans MBC APEXI Power Intake System Cometic metal head gasket ACL race bearings ARP head studs OEM replacement piston rings OEM front and rear main seals OEM camshaft seals Timing belt, tensioner and pulleys Bully stage 3, 6 puck Kevlar sprung clutch Bully stage 3 pressure plate Syms headers zero sports World Leaguer downpipe Zero sports world Leaguer Cat back exhaust poly urethane exhaust bushings Greddy RS blow off valve Suspension Gab Damping adjustable coilovers with camber plates Rear white line camber bolts Rear cusco Strut bar Front cusco Strut bar Whiteline 22mm rear Sway Brakes STI brembos up front w/hawk race pads 2.5rs set up in the rear w/hawk race pads Interior 2004 STI steering wheel Short shifter V2 Sti front seats Full rear interior Exterior OEM Version 6 front bumper with foglight covers and foglights under neath Replica Version 5 rear wing with brake light Replica front lip Carbon fiber front Grill 8000k HIDS Wheels 5-zigen Fn01rc wheels 17x8.5 40 offset Kumho XS all around Muteki lug nuts 5mm spacers (rear) Pics: Thanks Andrew Last edited by Stangy; 11-21-2012 at 01:55 PM. |
Thread Tools | |
Display Modes | |
|
|