|
Brakes & Suspension Forum sponsored by The Tire Rack |
|
|
|
Thread Tools | Display Modes |
12-12-2017, 12:28 PM | #1 |
Former Vendor
Member#: 125739
Join Date: Sep 2006
Chapter/Region:
South East
Location: Raleigh, NC
Vehicle:2007 1500HD Need Brakes? 919.420.0021 |
2018 STI Brembo Brakes
The pads and rotors used on the 2018 STI are confirmed now so we can prepare for next year. It will take a while to have reasonable parts for these brakes.
I am going to have GiroDisc make 2 piece front and rear rotors. UPDATE - WE CAN ONLY MAKE FRONTS. REARS WOULD REQUIRE A SHORTER PAD OR GRINDING A LOT OF THE STOCK PAD. NO BUENO I am going to have DBA make KNS rotors. UPDATE - ALL SYSTEMS GO - CALL ME IN THE FALL! Pad choices will be OK - fronts are already out but rears are going to take a bit. UPDATE - REAR PADS ARE ALL NEW BUT WE SHOULD HAVE THEM IN FEBRUARY I need to get a set of brake lines as well. DAMMIT _ AM I GOING TO HAVE TO BUY THOSE TOO? Rotors Front - 340mmx30mm and drilled -24.5 pounds. Pad Annulus = 59mm. The overall height is 54mm but my measurement of that was crude. Just a small change there. Nice black finish though Rotors Rear - 326mmx20mm and drilled -17.5 pounds. Pad Annulus = 54mm. The overall height is 63.5mm which appears to be unchanged. Nice black finish though Front Pads Rear Pads It's ALMOST but not quite this. Last edited by KNS Brakes; 01-11-2018 at 11:56 AM. |
Thread Tools | |
Display Modes | |
|
|