Welcome to the North American Subaru Impreza Owners Club Tuesday November 13, 2018
Home Forums WikiNASIOC Products Store Modifications Upgrade Garage
Go Back   NASIOC > NASIOC Technical > Normally Aspirated Powertrain

Welcome to NASIOC - The world's largest online community for Subaru enthusiasts!
Welcome to the NASIOC.com Subaru forum.

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, free of charge, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!

If you have any problems with the registration process or your account login, please contact us.
* Registered users of the site do not see these ads. 
Thread Tools Display Modes
Old 07-18-2002, 07:05 PM   #1
Scooby Newbie
Member#: 19018
Join Date: May 2002
Location: Maribor, Slovenia
1995 Legacy Wagon

Default Code 11 - Crank Angle Sensor

I have a constant problem with the crank angle sensor.

After I get the car to operating temp. and stop for 15-20 minutes, it won't start again. Using the 'memory read' connectors I got the code 11 - crank angle sensor.

If I leave the engine to really cool down or if I start it while it is still hot, it starts OK.

If I touch (or knock upon) the sensor (with my hand or a tool) and try to start the car again, it usually starts (sometimes I had to 'knock' it a bit more), which leads me to bellieve it's just a bad contact.

I've checked the connector and cable, I even took it apart, cleaned it up, re-soldered it, but the problem persists.

Now a have a couple of Qs:
1. How much should this sensor cost (approx.)?

2. Could I possibly use some non-OEM sensor and which?

3. Is it possible to take the sensor apart without destroying it? I suspect a bad soldering job somewhere inside the sensor.

Thanks, D.
* Registered users of the site do not see these ads.
danci1973 is offline   Reply With Quote
Sponsored Links
* Registered users of the site do not see these ads.

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Are all EJ Crank angle sensors the same? electricpork Factory 2.0L Turbo Powertrain (EJ Series Factory 2.0L Turbo) 2 07-10-2006 02:09 AM
EA82T code 11 crank angle sensor help please!!! iluvdrt Pre-2002 Factory Turbo Powertrain 4 11-02-2005 06:25 PM
WTB: MAF sensor and crank angle sensor CMJ Private 'Wanted' Classifieds 2 04-06-2005 02:16 AM
Crank Angle Sensor and Cam sensor DonkeyPunch Factory 2.0L Turbo Powertrain (EJ Series Factory 2.0L Turbo) 6 04-02-2005 10:59 PM
Part number - crank angle sensor danci1973 Legacy Forum 2 10-22-2002 04:04 AM

All times are GMT -4. The time now is 12:29 PM.

Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Powered by Searchlight © 2018 Axivo Inc.
Copyright ©1999 - 2017, North American Subaru Impreza Owners Club, Inc.