EJ20G/EJ20K part number thread

Marnix · 03-19-2007, 11:51 AM

I have access EUDM (up to 2005) and JDM (up to 2003) part CD-ROMs.

I can look up part numbers should you need any. Please always describe the part as clear as possibly, and state which model year. I can't promise I will look into this thread daily, but at least a few times a week. I will post the number as a reply to this thread, and will maintain a list in this first post.

At your service

Let me make clear that before you order anything based on the information and numbers I supply here, you should always double check with your supplier, to avoid disappointments!

* Registered users of the site do not see these ads.

rob · 03-19-2007, 01:40 PM

Thanks for setting this up. Would it make more sense to split the G and K motors to their own thread?

First request; Check if there is a different part # for the STi 1/2 HLA versus the standard WRX HLA.

I have used this thread a few times for early G stuff (some may be liberyRS specific)
http://www.rslibertyclub.org/forums/...ad.php?t=54967

-Rob

Jaxx · 03-19-2007, 03:55 PM

car gc8d48d
build 5/97
engine EJ20KDW6HE
tranny TY752VBCAA

plug wires:
-#1 - 22451AA793 not in system
-#2,4 - 22452AA682 not in system
-#3 - 22451AA822 not in system
coil pack: 22433AA370 (1) 73.19
maf: 22680AA271 (1) 210.91
power steering lines
-RHD 34610FA091 not in system
-LHD 34610FA100 not in system
ACCEL CABLE (EJ20K LHD): 37114FA070 not in system
boost solenoid: 16102AA091 not in system
map sensor: 22012AA160 (1) 219.39
iac: 22650aa132 not in system
injectors: 16611AA231 not in system
in fender overflow
-tank 45152AA020 20.24
-filler 45132AA010 not in system
-cap 45153AA001 3.39
pvc to block hose 807519082

head gasket: 11044AA355 (2) 27.78
sti reinforced head gasket: 11044AA463 not in system
water pump gasget: 21114AA051 (1)1.93
rear main seal: 806786040 (1) 8.74
cam seals: 806732150 (4) 5.87
valve cover gasget:
-right? 13270AA062 (1) 9.64
-left? 13272AA063 (1) 9.64
-?? 13293AA051 (4) 5.82 (says its for an 05-6 h6?)
-wash rocker cvr (13271AA051 (12 or 16) 2.38
manifold to intake: 14035AA281 (2) 3.32
manifold to throttle body: 16175AA151 (1) 1.70
manifold to IAC: 22659AA060 (1) 3.88
manifold to injector: 16608AA020 (4) 5.22

crank
-(#3 thrust bearing) 12200AA150 364.71
-(#5 thrust bearing) 12200AA2240 272.60
main bearings
-(#3 thrust bearing) 12209AA000 84.80
-(#5 thrust bearing) 12209AA360 133.41
rod bearings: 12108AA290 182.80
rods 12100AA240 52.70
rings: 12033AA730 not in system
head bolts: 11095AA041 7.26
rebuild gasket kit: 10105AA380 not in system

heads
-LH 11063AA742 not in system
-RH 11039AB132 not in system
cams (non STI)
-13032AA240 not in system
-13035AA240 not in system
-13038AA240 not in system
-13053AA240 not in system
cams (STI)
-13032AA390 not in system
-13035AA390 not in system
-13038AA390 not in system
-13053AA390 not in system
Non-RA valves:
-EXH: 13202AA350 13.24
-INT: 13201AA340 9.21
vavle spring: 13217AA160 not in system

rear deck cover
-Up to July 1997: 65510FA001ML not in system
-April 1997 on: 65510FA001OE not in system

Marnix · 03-20-2007, 04:25 AM

Plastic coolant tank on EJ20G intake manifold
TANK ASSEMBLY - WATER
21132AA001 (number is correct but not in Jamie's catalog)

Marnix · 03-21-2007, 05:28 AM

Quote:

car gc8d48d
build 5/97
engine EJ20KDW6HE
tranny TY752VBCAA

PLUG WIRES I FORGOT TO CHECK

22433AA370 COIL ASSY IGN (1)
22680AA271 METER AY-AIR FL (1)
11044AA355 GSKT-CYL HEAD (2)
21114AA051 GSKT-WATER PUMP (1)
806786040 OIL SEAL 86x103 (REAR CRANK SEAL) (1)
806732150 OILSEAL-32X45X8 (CAM SEAL) (4)
13270AA062 GSKT-ROCKER COV (1)
13272AA063 GSKT-ROCKER COV (1)
13293AA051 GSKT-ROCKER CVR (4)
13271AA051 WASH-ROCKER COV (12 or 16)
14035AA281 GSKT-INT MANIF (2)
16175AA150 GSKT-THROT CHAM (1)
22659AA060 GSKT-AIR CONT (1)
16608AA020 SEAL-FUEL INJEC (4)
34610FA091 P/S HOSE ASSY RHD (1)
34610FA100 P/S HOSE ASSY LHD (1)
16102AA091 VALVE AY - DUTY (1)
22012AA160 SEN ASSY-VAC (1)

Marnix · 03-21-2007, 05:30 AM

Quote:

WRX EJ20G HLA

13230AA160 ADJ CP-VLV LASH

Quote:

STI V1/2 EJ20G HLA

13230AA170 ADJ CP-VLV LASH

rob · 03-21-2007, 11:37 AM

AHA! They are different numbers. The lightweight STi variant may exist afterall.

Thanks,
Rob

Matt Monson · 03-21-2007, 12:49 PM

very interesting...

kbahus · 03-21-2007, 11:15 PM

Indeed....

Jaxx · 03-22-2007, 12:27 AM

WRX EJ20G HLA
13230AA160 ADJ CP-VLV LASH -28.45

STI V1/2 EJ20G HLA
13230AA170 ADJ CP-VLV LASH - not in system

Marnix · 03-22-2007, 05:21 AM

I couldn't find the STI HLA in my EUDM system / price list either. But I'm sure it can be ordered, they would just have to create the part number for the US or Europe. Parts tend to get expensive though (I once ordered a set of Spec C valve springs, which were 3 times as expensive as standard STI valve springs).

linsavy · 03-22-2007, 05:49 PM

Marnix,
Would you be kind enough to look up the number for intake valves for a Version 4 Type R. The valves have a marking of "I H" on them. They are different from a version 3.
Cheers,
Bruce

03-22-2007, 10:49 PM

WJM's request:

The 2003 JDM, STi Spec C Type RA standard size Pistons (92.0MM, for the A and B bore sizes)

thanks!

03-22-2007, 10:53 PM

Quote:

Originally Posted by Marnix

11044AA355 GSKT-CYL HEAD (2)

My head is going to assplode.

There are 14 of those in the USA (aka its a USA avalible part number).

kbahus · 03-23-2007, 12:50 AM

Marnix, could you get me the part number for the 90 degree rubber inlet piece that comes directly off the turbo? Thanks!

civic2scooby · 03-23-2007, 02:40 AM

EJ20G part numbers for the rubber inlet peice off the turbo intake and all subsequent pieces from that point to the air box. thanks!

Matt Monson · 03-23-2007, 11:45 AM

Quote:

Originally Posted by WJM

WJM's request:

The 2003 JDM, STi Spec C Type RA standard size Pistons (92.0MM, for the A and B bore sizes)

thanks!

That's not Ej20G/EJ20K.

But I bet Sponaugle can get you that part number...

03-23-2007, 11:51 AM

But Marnix posted he can get up to 2003 JDM part numbers, that includes an EJ207....

Marnix · 03-23-2007, 01:41 PM

EJ207 piston 'A' 12006AB430
EJ207 piston 'B' 12006AB440

But those are ridiculously expensive.

Marnix · 03-23-2007, 01:45 PM

Quote:

Originally Posted by kbahus

Marnix, could you get me the part number for the 90 degree rubber inlet piece that comes directly off the turbo? Thanks!

BOOT 46023FA000 (turbo inlet)
DUCT ASSEMBLY-AIR INTAKE 14459AA100 (between turbo and intercooler)

Marnix · 03-23-2007, 01:50 PM

Quote:

Originally Posted by civic2scooby

EJ20G part numbers for the rubber inlet peice off the turbo intake and all subsequent pieces from that point to the air box. thanks!

From MAF to Turbo:

BOOT 46023AA150
RESONATOR 46032AA050
BOOT 46023FA000

99WRXEJ20 · 03-23-2007, 02:58 PM

how about a IAC for a ej20g ver1

03-23-2007, 04:01 PM

Too bad those are not US part numbers. (pistons)

linsavy · 03-23-2007, 04:44 PM

Got the # for the intake valves? Version 4 type R

555 WR · 03-23-2007, 07:03 PM

any chance you can copy those CD's?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
EJ20G & EJ20K Parts	awdeclipseguy	1993 - 2001 Impreza Specific Parts	17	06-15-2009 08:04 PM
EJ20G Gasket Part Numbers...	scoobydorift	Subaru Conversions	13	02-14-2005 11:43 PM
Official XT Oil Filter Part Number thread	BrysImpreza	Forester Forum	8	10-30-2003 12:23 AM
NAPA Part numbers- can we have a nice thread with numbers listed?	Tex-WReX2	Service & Maintenance	5	12-15-2001 10:21 AM

03-19-2007, 11:51 AM	#1
Marnix Scooby Specialist Member#: 51480 Join Date: Dec 2003 Chapter/Region: International Location: The Netherlands Vehicle: 1984 AM5, 1984 AF1, 1994 BC4, 2015 Outback	EJ20G/EJ20K part number thread I have access EUDM (up to 2005) and JDM (up to 2003) part CD-ROMs. I can look up part numbers should you need any. Please always describe the part as clear as possibly, and state which model year. I can't promise I will look into this thread daily, but at least a few times a week. I will post the number as a reply to this thread, and will maintain a list in this first post. At your service Let me make clear that before you order anything based on the information and numbers I supply here, you should always double check with your supplier, to avoid disappointments! * Registered users of the site do not see these ads.

03-19-2007, 01:40 PM	#2
rob n00b Moderator Moderator Member#: 811 Join Date: Jan 2000 Location: WA Vehicle: 2000 RS-Ej20G It tastes like burning	Thanks for setting this up. Would it make more sense to split the G and K motors to their own thread? First request; Check if there is a different part # for the STi 1/2 HLA versus the standard WRX HLA. I have used this thread a few times for early G stuff (some may be liberyRS specific) http://www.rslibertyclub.org/forums/...ad.php?t=54967 -Rob

03-19-2007, 03:55 PM	#3
Jaxx Scooby Guru Member#: 177 Join Date: Aug 1999 Chapter/Region: NWIC Location: Austin, Texas, USA Vehicle: The 93 W/EJ20K-sold Subaru-less :(	car gc8d48d build 5/97 engine EJ20KDW6HE tranny TY752VBCAA plug wires: -#1 - 22451AA793 not in system -#2,4 - 22452AA682 not in system -#3 - 22451AA822 not in system coil pack: 22433AA370 (1) 73.19 maf: 22680AA271 (1) 210.91 power steering lines -RHD 34610FA091 not in system -LHD 34610FA100 not in system ACCEL CABLE (EJ20K LHD): 37114FA070 not in system boost solenoid: 16102AA091 not in system map sensor: 22012AA160 (1) 219.39 iac: 22650aa132 not in system injectors: 16611AA231 not in system in fender overflow -tank 45152AA020 20.24 -filler 45132AA010 not in system -cap 45153AA001 3.39 pvc to block hose 807519082 head gasket: 11044AA355 (2) 27.78 sti reinforced head gasket: 11044AA463 not in system water pump gasget: 21114AA051 (1)1.93 rear main seal: 806786040 (1) 8.74 cam seals: 806732150 (4) 5.87 valve cover gasget: -right? 13270AA062 (1) 9.64 -left? 13272AA063 (1) 9.64 -?? 13293AA051 (4) 5.82 (says its for an 05-6 h6?) -wash rocker cvr (13271AA051 (12 or 16) 2.38 manifold to intake: 14035AA281 (2) 3.32 manifold to throttle body: 16175AA151 (1) 1.70 manifold to IAC: 22659AA060 (1) 3.88 manifold to injector: 16608AA020 (4) 5.22 crank -(#3 thrust bearing) 12200AA150 364.71 -(#5 thrust bearing) 12200AA2240 272.60 main bearings -(#3 thrust bearing) 12209AA000 84.80 -(#5 thrust bearing) 12209AA360 133.41 rod bearings: 12108AA290 182.80 rods 12100AA240 52.70 rings: 12033AA730 not in system head bolts: 11095AA041 7.26 rebuild gasket kit: 10105AA380 not in system heads -LH 11063AA742 not in system -RH 11039AB132 not in system cams (non STI) -13032AA240 not in system -13035AA240 not in system -13038AA240 not in system -13053AA240 not in system cams (STI) -13032AA390 not in system -13035AA390 not in system -13038AA390 not in system -13053AA390 not in system Non-RA valves: -EXH: 13202AA350 13.24 -INT: 13201AA340 9.21 vavle spring: 13217AA160 not in system rear deck cover -Up to July 1997: 65510FA001ML not in system -April 1997 on: 65510FA001OE not in system Last edited by Jaxx; 05-05-2007 at 01:51 PM. Reason: updated with info from below thanks!

03-20-2007, 04:25 AM	#4
Marnix Scooby Specialist Member#: 51480 Join Date: Dec 2003 Chapter/Region: International Location: The Netherlands Vehicle: 1984 AM5, 1984 AF1, 1994 BC4, 2015 Outback	Plastic coolant tank on EJ20G intake manifold TANK ASSEMBLY - WATER 21132AA001 (number is correct but not in Jamie's catalog)

03-21-2007, 11:37 AM	#7
rob n00b Moderator Moderator Member#: 811 Join Date: Jan 2000 Location: WA Vehicle: 2000 RS-Ej20G It tastes like burning	AHA! They are different numbers. The lightweight STi variant may exist afterall. Thanks, Rob

03-21-2007, 12:49 PM	#8
Matt Monson Scooby Guru Member#: 832 Join Date: Jan 2000 Chapter/Region: RMIC Location: Teh Ghetto Garage, CO Vehicle: 99 2.5RS, '85 911 '73 914 and 2012 BRZ	very interesting...

03-21-2007, 11:15 PM	#9
kbahus Scooby Specialist Member#: 70256 Join Date: Sep 2004 Chapter/Region: RMIC Location: Fort Collins, CO Vehicle: 2000 STI V2 Swapped Silver	Indeed....

03-22-2007, 12:27 AM	#10
Jaxx Scooby Guru Member#: 177 Join Date: Aug 1999 Chapter/Region: NWIC Location: Austin, Texas, USA Vehicle: The 93 W/EJ20K-sold Subaru-less :(	WRX EJ20G HLA 13230AA160 ADJ CP-VLV LASH -28.45 STI V1/2 EJ20G HLA 13230AA170 ADJ CP-VLV LASH - not in system

03-22-2007, 05:21 AM	#11
Marnix Scooby Specialist Member#: 51480 Join Date: Dec 2003 Chapter/Region: International Location: The Netherlands Vehicle: 1984 AM5, 1984 AF1, 1994 BC4, 2015 Outback	I couldn't find the STI HLA in my EUDM system / price list either. But I'm sure it can be ordered, they would just have to create the part number for the US or Europe. Parts tend to get expensive though (I once ordered a set of Spec C valve springs, which were 3 times as expensive as standard STI valve springs).

03-22-2007, 05:49 PM	#12
linsavy Scooby Specialist Member#: 11620 Join Date: Oct 2001 Location: Ontario Vehicle: 1997 GF4-STiV3 clone	Marnix, Would you be kind enough to look up the number for intake valves for a Version 4 Type R. The valves have a marking of "I H" on them. They are different from a version 3. Cheers, Bruce

03-22-2007, 10:49 PM	#13
WJM Guest Member#:	WJM's request: The 2003 JDM, STi Spec C Type RA standard size Pistons (92.0MM, for the A and B bore sizes) thanks!

03-23-2007, 12:50 AM	#15
kbahus Scooby Specialist Member#: 70256 Join Date: Sep 2004 Chapter/Region: RMIC Location: Fort Collins, CO Vehicle: 2000 STI V2 Swapped Silver	Marnix, could you get me the part number for the 90 degree rubber inlet piece that comes directly off the turbo? Thanks!

03-23-2007, 02:40 AM	#16
civic2scooby Scooby Specialist Member#: 78658 Join Date: Jan 2005 Chapter/Region: MWSOC Location: East Lansing Michign Vehicle: 2005 LGT Limited Black/Black	EJ20G part numbers for the rubber inlet peice off the turbo intake and all subsequent pieces from that point to the air box. thanks!

03-23-2007, 11:51 AM	#18
WJM Guest Member#:	But Marnix posted he can get up to 2003 JDM part numbers, that includes an EJ207....

03-23-2007, 01:41 PM	#19
Marnix Scooby Specialist Member#: 51480 Join Date: Dec 2003 Chapter/Region: International Location: The Netherlands Vehicle: 1984 AM5, 1984 AF1, 1994 BC4, 2015 Outback	EJ207 piston 'A' 12006AB430 EJ207 piston 'B' 12006AB440 But those are ridiculously expensive.

03-23-2007, 02:58 PM	#22
99WRXEJ20 Scooby Specialist Member#: 34545 Join Date: Mar 2003 Chapter/Region: MWSOC Location: Worthington, Ohio Vehicle: 1999 GC8 74f	how about a IAC for a ej20g ver1

03-23-2007, 04:01 PM	#23
WJM Guest Member#:	Too bad those are not US part numbers. (pistons)

03-23-2007, 04:44 PM	#24
linsavy Scooby Specialist Member#: 11620 Join Date: Oct 2001 Location: Ontario Vehicle: 1997 GF4-STiV3 clone	Got the # for the intake valves? Version 4 type R

03-23-2007, 07:03 PM	#25
555 WR Scooby Newbie Member#: 127307 Join Date: Sep 2006 Chapter/Region: MAIC Location: PA Vehicle: 96 WRX Type R 555 Subaru Blue	any chance you can copy those CD's?