|
![]() |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Scooby Newbie
Member#: 254057
Join Date: Aug 2010
Chapter/Region:
MWSOC
Location: Milwaukee, WI
Vehicle:2002 WRX |
![]() Hi I have a 02 bugeye hybrid with vf39, grimmspeed ebcs, and all supporting mods. I have been boosting 19psi at 11.4:1 AFR with no problems. Then all of a sudden one day I was getting on the freeway and I hit on it and it stuttered for a second and then kept going (19psi). Well I get off the freeway and boosted it in first, right when the boost was getting over 10psi the pressure started going all crazy like 13psi, 17, 15, 18, 14, 19. And my AFR's went down to 10:1. Also the motor started stuttering and was kind of shaking (and it was back firing from going so rich). Then I let off and the car drove fine as long as I dont go over 10psi. I tried the same thing in second gear and it did the same exact thing. I did a 20psi boost leak test and heard no leaks. I took off the TMIC tightened all the clamps, checked all the couplers/gaskets and found nothing.
What do you guys think it could be? Thanks Eric Last edited by DrBelmore; 12-03-2010 at 04:48 PM. |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
WRX 2.0 wont boost over 4lbs | TPPERFORMANCE | Factory 2.0L Turbo Powertrain (EJ Series Factory 2.0L Turbo) | 18 | 07-02-2010 12:47 PM |
Car wont rev over 5000 RPM, pulled Map sensor and cars fine.... Please help!!! | Cautionjump | Factory 2.0L Turbo Powertrain (EJ Series Factory 2.0L Turbo) | 3 | 06-08-2007 11:45 PM |
wont boost over 5psi | v8eaterWRX | Factory 2.0L Turbo Powertrain (EJ Series Factory 2.0L Turbo) | 8 | 12-25-2006 06:06 PM |
wont boost past 10psi | mtxfrk2k1 | Normally Aspirated with bolt-on Forced Induction Powertrain | 10 | 04-02-2006 04:01 AM |
HELP!Car wont get over 3800 rpm? | 4CEFED6 | Factory 2.0L Turbo Powertrain (EJ Series Factory 2.0L Turbo) | 27 | 08-19-2002 10:23 AM |