|
![]() |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Scooby Newbie
Member#: 374930
Join Date: Nov 2013
Location: Whittier, CA
Vehicle:2013 Impreza WRX WRB Pearl |
![]() hey all, i have done all the typical misfire checks. I've done the following:
Clean Maf sensor New spark plugs (gapped at 0.028) Inspected all coil packs (did swap 2 to 1, but since no stored CEL i have no idea what cylinder is misfiring) Completed a compression test this morning Cylinder 1: 122 Cylinder 2: 124 Cylinder 3: 124 Cylinder 4: 120 Replaced in-tank fuel filter and fuel pump sock as well. Did a datalog (included below) and only see roughness counts on cylinder 3. Swapped coilpack with cylinder 1 with no change***8230; I was thinking possibly injectors but looking at the datalog i'm assuming it's not that. Only modification change in the last 6 months is a new clutch and lightweight flywheel. Car was tuned with the factory clutch kit and flywheel, so i'm unsure if that would contribute like it used to for the ej20's. Any help would be appreciated, thanks in advance. PS Data log was cut short due to having a dinosaur V2 and sometimes it stops datalogging mid-way. Datalog: https://docs.google.com/spreadsheets...it?usp=sharing modlist: vf48 13 sti tmic walbro 255 invidia catless downpipe spt intake grimmspeed ebcs protuned back in 2014 by Sean at Church in LA Last edited by Inflict89; 11-10-2020 at 06:10 PM. |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|