Important UTEC announcement! Please read

nmyeti · 07-10-2003, 10:40 AM

It has been brought to our attention that over the last 4 weeks or so a fairly large number of UTEC have been shipped with an incorrect software version installed on them. All recent UTEC owners please take a few moments and verify which version of the software you have loaded onto your UTEC.

When looking at the home menu, the upper right hand will tell you which version of software your UTEC is running. The problem UTECs will display software version 3.1t.

If your UTEC is running 3.1t software you must update your software to the current 3.1 version immediately. The 3.1t software is used by our engineers in Australia to bench test some of the UTEC’s fueling functions and MAF hardware. It was never designed or intended to actually drive a car. It also renders any user tuning of the fuel map to be useless.

If you have version 3.1t please follow the update procedures at the following link
http://www.turboxs.com/utectuning.htm

We apologize for any inconvenience this has caused.

-Nathan
www.turboxs.com

07-10-2003, 10:40 AM	#1
nmyeti Scooby Specialist Member#: 4980 Join Date: Mar 2001 Location: Albuquerque, NM USA	Important UTEC announcement! Please read It has been brought to our attention that over the last 4 weeks or so a fairly large number of UTEC have been shipped with an incorrect software version installed on them. All recent UTEC owners please take a few moments and verify which version of the software you have loaded onto your UTEC. When looking at the home menu, the upper right hand will tell you which version of software your UTEC is running. The problem UTECs will display software version 3.1t. If your UTEC is running 3.1t software you must update your software to the current 3.1 version immediately. The 3.1t software is used by our engineers in Australia to bench test some of the UTEC’s fueling functions and MAF hardware. It was never designed or intended to actually drive a car. It also renders any user tuning of the fuel map to be useless. If you have version 3.1t please follow the update procedures at the following link http://www.turboxs.com/utectuning.htm We apologize for any inconvenience this has caused. -Nathan www.turboxs.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Important OTter Memo: Please Read	upnygimp	Off-Topic	25	04-07-2006 09:55 AM
An Even More Important OTter Memo: Please Read	24	Off-Topic	12	04-06-2006 05:39 PM
ANNOUNCEMENT! NEW FORUMS, please read.	munkis	STi Forum Archive	30	09-19-2003 04:21 PM
UTEC Users please read the manual!	nmyeti	Engine Management & Tuning	15	10-27-2002 04:10 PM
Important, please read, be careful of this phsyco	Delicious Tuning	Bay Area Impreza Club Forum -- BAIC	30	08-02-2001 03:00 PM