|
|
|
|
Thread Tools | Display Modes |
09-01-2017, 02:18 AM | #1 |
Scooby Newbie
Member#: 34368
Join Date: Mar 2003
Location: pasadena, CA
|
Hello all; im new to the forum and just got my first subaru about a month ago. I use to love modding my cars but that was on hold for a bit. the usual life, work, work and etc.. i didnt have a car to mod for about 10 years or so, just doing maintenance type things to my SUVs. i have 2 kids now and i spend most of my time with them and going on trips to the mountains and beaches. now they are in school most of the day and i have time in the mornings to play around in the garage.
so i wanted a track car and originally looking for an mr2 hardtop. ive had 3 sw20 and 1 aw11 supercharge. A part of me wanted something new that i have never taken apart. ive always liked the Gm body and i hate sunroofs so i had to find a regular impreza. found one in decent shape and runs very well. a few weeks later bought a 2003 wagon to use as a parts car. my friend would get the shell and i take everything else. i test drove the wagon and felt good had a nice sound to it. next day i got up and wanted to see what brand exhaust was on there and see if it would fit the GM chassis. well the guy sold me a car without an exhaust at all. it was just the stock pipe hanging in front of the diff. as usually he says sold as is, and that i checked it out anyways. i told him the ad clearly stated that aftermarket exhaust was included as well as an amp(which was also missing) lesson learned, but who would sell a car without an exhaust! on with the picks. 20170824_115252 by meme meme, on Flickr 20170824_115302 by meme meme, on Flickr 20170819_124601 by meme meme, on Flickr font half looks ok. has right rear quarter panel damage near the gas door. and bumper is hanging down. 20170819_124639 by meme meme, on Flickr 20170819_135139 by meme meme, on Flickr 20170823_182557 by meme meme, on Flickr V7 or V8 seats. not sure which it is. fits great after bending the mounting tabs back. it does sit a bit high. im about 5'8 and if i lean it back slightly its ok. but i dont like to drive like that. so ill get the rails out of the GD after the engine swap is done. also holds so much better then my friends 2016 sti(not 100% sure on the year) 20170831_200758 by meme meme, on Flickr draining fluids today. will pull the motor out saturday. spend the week cleaning and paint the bay gun metal. few pics of parts i got the last 2 weeks. few more things coming. got a new flywheel coming but was damaged in shipping because of the storm( as i was told). they are sending it back and have to order a new one. -coming soon fortune 500 gen6 coilover; month wait new flywheel Aem wideband plasti dip anthracite kit for exterior enamel gun metal paint kit for engine bay these are parts i have now. 20170831_192103 by meme meme, on Flickr 20170831_192111 by meme meme, on Flickr 20170829_152829 by meme meme, on Flickr ebay 3in downpipe. looks really bad on the inside. but it was only about $80. ebay oval exhaust for a GD; hope it fits ok new group n motor mounts and pitch thing new tans mount trans bracket bushing prothane shifter bushing kit new shift linkage with bushing stoptech brake lines hawk hp plus pads exedy ksb03 clutch kit redline oil 5w40 75w90 75w90ns light weight shockproof bunch of oem filters. rpf1 brone 17x8 +45 falken rt615k 215/45/17 racepak iq3s dash. originally was going to use haltech, then microsquirt, didnt want to spend money on wiring the oem ecu then get an access port later/open source. figure as that $1400 and get a nice programmable now. still not sure which route to take yet. -still need to order hood with scoop rs bumper and all other stuff for it. rs wing new seat belts for both front thats all i can think of now. ill add pics as things progress. i will try to do the harness merge to try and save $815. once i get the harnesses out ill see if im in the mood for the merge. ive done a bunch of sr20det swaps a longgggg time ago but that was really easy and had exact pins to rewire. if i remember right that was only like 4 wires and then the automatic interlock wires. so that was really easy.
* Registered users of the site do not see these ads.
Last edited by jvh22a; 09-07-2017 at 03:36 AM. |
09-07-2017, 11:38 AM | #2 |
Scooby Newbie
Member#: 34368
Join Date: Mar 2003
Location: pasadena, CA
|
small update;
i pulled the motor out but couldnt get the axles out. so i dropped the subframe and auto trans with everything connected. 20170904_165153 by meme meme, on Flickr as i was taking apart the auto shifter found out it does have a cup hole. ive been using the storage by the e-brake to hold my drinks. 20170905_113317 by meme meme, on Flickr from the donor car; i pulled the sub frame out first to get it cleaned and painted. i left the axle connected to the spindle and shocks and will put that out as a whole. 20170906_183111 by meme meme, on Flickr 20170906_183745 by meme meme, on Flickr i like to lift the back as high as i could get it when pulling a motor. with the rearend high and an engine leveler it doesnt hit anything and makes it easy to pull the motor out by yourself. 20170906_202001 by meme meme, on Flickr 20170906_212832 by meme meme, on Flickr for anyone replacing the shift link, it is a double pin. so tap out the smaller one then the outer one. 20170906_214901 by meme meme, on Flickr 20170906_215032 by meme meme, on Flickr |
09-07-2017, 11:57 AM | #3 |
Scooby Specialist
Member#: 254851
Join Date: Aug 2010
Chapter/Region:
BAIC
Location: Nor-Cal Bay Area
Vehicle:2002 WRX wagon 5mt PSM |
Very cool.
Good luck. |
09-08-2017, 08:42 AM | #4 |
Scooby Specialist
Member#: 50149
Join Date: Dec 2003
Chapter/Region:
Tri-State
Location: PA
Vehicle:15 Legacy Looking for Baja Turbo |
That's a lot of work to do to get 2 doors behind the turbo motor, but projects are always fun so hopefully it turns out as you would like it to! I had a wildly modded 91 MR2 and every time I'm on craigslist I'm looking for another.. they never get old, but AWD is a force to be reckoned with.
|
09-08-2017, 09:16 AM | #5 |
Scooby Guru
Member#: 120
Join Date: Jul 1999
Chapter/Region:
AKIC
Location: Where the Navy sends me...
Vehicle:1997 Legacy 2.5GT 1996 Impreza coupe |
You didn't waste any time jumping in with both feet after your 10-year hiatus! Should be a very fun car when it's all together.
He's hardly the first person to swap an early Impreza. Smaller & lighter, what more can you ask for if you're building a track car? |
09-08-2017, 12:20 PM | #6 |
Scooby Specialist
Member#: 42548
Join Date: Aug 2003
Location: SLC, UT
Vehicle:2020 STI Series Whit Ceramic White |
Nice start to what will be a really fun project!
I enjoy my swap everyday and curse it at the same time. Haha. BUT the smiles always outweigh the cursing. Look forward to seeing the progress! |
09-09-2017, 01:35 AM | #7 |
Scooby Newbie
Member#: 34368
Join Date: Mar 2003
Location: pasadena, CA
|
thanks everyone
i got the motor in last night. i was in a hurry and forgot to put the clutch master in. i got new group n motor mount and trans and pitch mount. also got new super pro trans bracket mounts my car was originally and automatic so it didnt have the front trans bracket. when i went to mount the front trans bracket i couldnt find the hole. my trans tunnel was so caked up with dirt and oil i didnt see the plastic cover. for anyone else that is new to subaru, this is what the covers look like 20170908_073323 by meme meme, on Flickr next was the shifter. went to reinstall the shifter but couldnt get it in. found a snap ring at the bottom of the shift assembly under the car. once i removed that the white plastic thing that holds the shifter in place can be removed. 20170908_184545 by meme meme, on Flickr question to others that have done the swap; which coolant port on the fire wall goes to which port on the motor? using the impreza original impreza lines i have two options impreza chassis passenger port to motor driver side port 20170908_203050 by meme meme, on Flickr or chassis driver side port to motor driver side port 20170908_203110 by meme meme, on Flickr don't get prothane shifter bushings. the one that goes to the back of the shifter doesnt fit. 20170908_073410 by meme meme, on Flickr got the pedal set out of the gd wagon. it was a real tight fit and stripped one of the top bolt holes. so i had to remove everything again to retap. took about about 2 hours just trying to get it installed right in the GM. i got allthe bolts except the right side bolt near the gas pedal. 20170908_090513 by meme meme, on Flickr installed in the GM but the gas pedal looks really low. is this normal? im alsoo using the GD throttle cable. 20170908_180719 by meme meme, on Flickr Last edited by jvh22a; 09-09-2017 at 02:07 AM. |
09-15-2017, 01:48 AM | #8 |
Scooby Newbie
Member#: 34368
Join Date: Mar 2003
Location: pasadena, CA
|
got some more parts. and my younger boy helping out for the day.
20170913_194002 by meme meme, on Flickr 20170913_152125 by meme meme, on Flickr been working on getting the wrx harness out of the car. 20170910_155402 by meme meme, on Flickr 20170910_194734 by meme meme, on Flickr wrx rear end parts ready to go in tomorrow. 20170914_200743 by meme meme, on Flickr 20170914_200719 by meme meme, on Flickr im still debating if i should get a haltech elite 750 or iwire merge. -haltech is about 1400+wideband and try to get it setup -iwire is about 820+ accessport+wideband but should be running since its stock ecu. |
09-19-2017, 02:07 AM | #9 |
Scooby Newbie
Member#: 34368
Join Date: Mar 2003
Location: pasadena, CA
|
small update;
i got the wrx gas tank in and then realized the tank has a quick disconnect hose. so out it came again. after a bit of thinking i firgured i should be able to swap the pump assembly into the wrx tank then i could use the gc pump harness and hard lines. then figured i try the hard lines from the wrx wagon, and they fit. so the complete wrx wagon tank went back in. so hope that the merge harness will work with this setup. ordered a few parts from import image racing. mishimoto intercooler and kartboy bushings. 2 mishimoto fans. next is the wiring. either iwire or haltech. or if anyone is local and want to help me with the merge let me know. for all you swapped gc guys; what did you do about speed sensor? i have an auto mechanical sensor hanging from my clutser but it doesnt reach the wrx trans sensor. 20170917_174334[1] by meme meme, on Flickr 20170917_174324[1] by meme meme, on Flickr |
09-21-2017, 02:20 AM | #10 |
Scooby Newbie
Member#: 34368
Join Date: Mar 2003
Location: pasadena, CA
|
well; today took a drive down to drop off my harnessto get merged.
after asking a few questions, i decided to just use the full wrx gas tank and all sensors. so this weekend ill be reinstalling the tank for the third time and try and use all the wrx charcoal canister and hoses. next problem i forgot about till now. Speed sensor! my car is an automatic and the cable is short. so i guess i need a manual trans cable but it is discontinued part from subaru. i got the mishimoto intercooler kit today. but it is up for sale. want to change colors now. |
09-28-2017, 01:56 PM | #11 |
Scooby Newbie
Member#: 34368
Join Date: Mar 2003
Location: pasadena, CA
|
Small update. Removes wrx gas tank again and confirmed with iwire. The reinstall it again. I got new fuel return line installed and everything hooked up for the gas tank except the evap stuff.
Today im installing the complete rear end and driveshaft. I got my fortune auto 500 gen6 coilover kit in yesterday, thanks to import image racing. So that will be installed over the weekend. 20170927_175415 by meme meme, on Flickr 20170927_200456 by meme meme, on Flickr 20170927_200559 by meme meme, on Flickr it came with 2 bolts. one in each front shock. so i think it is suppose to replace the stock camber bolts. i thought i heard they come ready to install. meaning preload is set to recommended setting for springs used. but they are all loose. springs they gave me are 9k all around. I got a bunch of small stuff ordered from subaru Brake ducks Mechanical speed sensor (hope i got the right one) Rs hood Camo hose kit from ebay Uppipe heat blanket Down pipe heat wrap Perrin brake master bracket Ebay impreza radiator The day before i pulled the carpet out and did some cleaning. The last owner must have spilled a few big gulps becaise it was nasty adter hosing it down. second wash still dirty. 20170926_101440 by meme meme, on Flickr I got kart boy shifter bushing kit to replace my prothane kit. On prothane kit , the back piece was to had and wasnt able to stretch it to get it the holes lined up. The kartboy rear part i was able to pull it a bit and got the holes lined up. Thren the 2 round pieces for the linkage, the kart boy wasnt think enough and the big round washer thing didnt sit up agaisnt the bushing.got the prothane ones and tried those. It fit perdectly. 20170923_114015 by meme meme, on Flickr 20170923_114318 by meme meme, on Flickr protane on the left, kartboy on the right I have a mix match kit for sale now. Prothane rear piece and kart boy front 2 roind pieces. Last week i replaced the shift linkage with a new oem part. Turns out i installed it wrong. So i had to remove trans bracket and everythibg in the way to get the pins out. So anyone doing this, make sure the side with the small hole is facing down. There should be a spring from that small hole to the link with the 2 round bushings. 20170923_113459 by meme meme, on Flickr installed the right way now. Last edited by jvh22a; 09-28-2017 at 07:49 PM. |
10-01-2017, 02:52 AM | #12 |
Scooby Newbie
Member#: 34368
Join Date: Mar 2003
Location: pasadena, CA
|
today i got a lot done. prepped the rearend and subframe to mount. after mounting i couldnt get the fuel filler tube installed so i had to slightly drop the subframe to be able to tighten the filler tube to tank hose.
i couldnt get the holes of the GD filler tube to match up with the mounting at the gas door, so that is kind of loose. got the fortune auto coilover kit installed. im not sure if it is suppose to do this but the rear suspension is at full positive camber. its really hard to adjust camber without having the wheel on and pushing the top of the wheel to get some negative camber. without the wheel mounted it is really hard to adjust camber. 20170930_204549 by meme meme, on Flickr installed the perrin GD brake master brace. like they say measure twice and drill once. i forgot to add the difference to my first measurement and so it came up short. so i had to drill another hole. the brace prettey much is right up against the brake master even without the adjuster pushing on the master. had to bend the front brake line down and back a bit. 20170930_171500 by meme meme, on Flickr 20170930_114539 by meme meme, on Flickr 20170930_171238 by meme meme, on Flickr i got a ebay impreza radiator. looks and fits really good. made by DPL. it is 2in thick core and comes with a radiator cap. 20170930_083911 by meme meme, on Flickr 20170930_083928 by meme meme, on Flickr 20170930_083858 by meme meme, on Flickr |
10-02-2017, 06:55 PM | #13 |
Scooby Newbie
Member#: 455087
Join Date: Sep 2016
Location: Albany, OR
Vehicle:2002 Impreza WRX WRB |
Exciting read already, always fun to watch the more skilled people work
|
10-04-2017, 01:34 PM | #14 | |
Scooby Newbie
Member#: 34368
Join Date: Mar 2003
Location: pasadena, CA
|
Quote:
got some more parts in. 20171003_165114 by meme meme, on Flickr 20171003_165130 by meme meme, on Flickr 20171003_165057 by meme meme, on Flickr fan kit doesnt fit the impreza radiator. so ill have to mount the fans directly to the radiator. i placed two orders with subarupartsdeal.com. and should be here next week. next few days ill be bleeding the clutch, brakes and installing the hawk pads. brakes lines already installed. then also setting preload on the coilovers. from there, wait for the oem parts to show up to get other stuff done. |
|
10-05-2017, 03:27 AM | #15 |
Scooby Newbie
Member#: 34368
Join Date: Mar 2003
Location: pasadena, CA
|
i got motul 5.1 brake fluid yesterday so i bleed the brakes, but could not get the clutch bleed. wasted about 2/3 of the bottle! i removed the slave to get it higher then the master. did a couple of bleeds but still no good. the clutch pedal just drops to the floor and wont spring back. im looking into getting a steel braided line to replace the rubber line and damper thing.
got some more parts in ebay headlight kit up pipe thermal blanket magnetic drain plug. new alternator from rock auto; it was only $20 or so more for new then remanufactured. 20171004_193624 by meme meme, on Flickr 20171004_193513 by meme meme, on Flickr |
10-05-2017, 08:59 PM | #16 |
Scooby Newbie
Member#: 417695
Join Date: Apr 2015
Chapter/Region:
NWIC
Location: Puyallup, Washington
|
sub'd
|
10-05-2017, 11:53 PM | #17 |
Scooby Newbie
Member#: 34368
Join Date: Mar 2003
Location: pasadena, CA
|
Exciting day for me, i got my hood!
20171005_174020 by meme meme, on Flickr also got the brake duct splash guard thingy 20171005_174118 by meme meme, on Flickr 20171005_193827 by meme meme, on Flickr ebay radiator hose white camo. looks better in the ad then it does in the picture. looking at it real quick it looks like a cow. got my new manual speed sensor. if you have an auto trans and doing to 5spd swap, this is the only part you will need for speed sensor. mounts the same way as the auto. there is a small spring inside so dont loose that. once the cable is indexed the round part with the slit clips into the top part of the sensor. 20171005_174038 by meme meme, on Flickr 20171005_185423 by meme meme, on Flickr 20171005_185356 by meme meme, on Flickr wrx sensor , 96 auto sensor, manual sensor 20171005_175230 by meme meme, on Flickr one more subaru order coming next week. flywheel, gaskets, clutch flywheel bolts and a bunch of misc bolts. scoop mounting bolts ive been spending to much money on this car! originally i thought $5k max including the car. im way past that now. waiting on a china catch baffled catch can, short shifter, once i get my harness back from iwire then i could starting finishing up the heater hoses and get the mishimoto intercooler installed. Last edited by jvh22a; 10-10-2017 at 08:30 PM. |
10-08-2017, 01:02 AM | #18 |
Scooby Specialist
Member#: 333468
Join Date: Sep 2012
Chapter/Region:
RMIC
Location: SLC, UT
Vehicle:93 SS - 06 OB XT 03 WRB GD 205/22T 20G-XT |
I have found the best way to bleed the clutch is to get a speed bleeder valve, the kind you can install on the brakes. Then you can just run a tube to a clear bottle and watch the bubbles come out as you pump the clutch. Otherwise it's a complete bitch to do.
Nice swap so far! |
10-10-2017, 08:49 PM | #19 |
Scooby Newbie
Member#: 34368
Join Date: Mar 2003
Location: pasadena, CA
|
after trying to bleed the master and gave up i ordered the speed bleeders for the brakes and clutch master. i got the ones form russell.
after bleeding for a long time i got it to a point where i was happy with it and then install it. got the master in and trying to get the slave in i pushed in the piston and it was at an angle and fluid came out. this car is nickle and diming me to death! so i junked both master and slave and ordered news ones from rockauto. then ordered -3an to m10x1.0 adaptors and 12" -3an brake hose to replace all the oem stuff. i was trying to save as much money as i could but in the end this is just easier. i normally do this for all my swaps back in the day with my nissans and toyota. dusted off my bench bleed kit 20171007_192942 by meme meme, on Flickr 20171007_192934 by meme meme, on Flickr after about 30min or so here is where they ended up. 20171008_200024 by meme meme, on Flickr i got the downpipe installed to test fitment and install perrin heat shield. come to find out im missing the bracket to hold the perrin heat shield. this part is $30 from subaru! nickle and diming me again... 20171008_200050 by meme meme, on Flickr got my flywheel and random stuff from subarupartsdeal 20171009_154352 by meme meme, on Flickr 20171009_154347 by meme meme, on Flickr they really suck at packing! the shipped the flywheel without any bubble wrap or any way to protect it! iwire shroud 20171008_200309 by meme meme, on Flickr since my rs hood didnt come with the vents and scoop i had to get some from ebay. and ordered mounting hardware from subaru 20171008_200235 by meme meme, on Flickr few more things coming this week and main goal is to get the clutch master and slave bleed and installed. then work on the fans and radiator. |
10-13-2017, 11:54 AM | #20 |
Scooby Newbie
Member#: 34368
Join Date: Mar 2003
Location: pasadena, CA
|
got some more parts in
20171012_174223 by meme meme, on Flickr still have to wait for the -3an and banjo fitting to try and bleed the clutch again. 20171012_174230 by meme meme, on Flickr 20171012_174240 by meme meme, on Flickr since the fan and shroud i got didnt fit, i ordered new 12in fans and mounted them directly to the core 20171012_204141 by meme meme, on Flickr 2017-10-13_08-47-52 by meme meme, on Flickr now i got to look for a fitting that will fit. 20171012_215628 by meme meme, on Flickr looks more like a cow print in person. it had a small kink on the engine side of the hose, but not to bad, so it should be ok. GD exhaust does not fit a GC. once everything else is done ill cut the mounting tabs off and get it straight and reweld the tabs. 20171012_174151 by meme meme, on Flickr |
10-14-2017, 08:26 PM | #21 |
Scooby Guru
Member#: 120
Join Date: Jul 1999
Chapter/Region:
AKIC
Location: Where the Navy sends me...
Vehicle:1997 Legacy 2.5GT 1996 Impreza coupe |
Moooo!
|
10-16-2017, 12:50 AM | #22 |
Scooby Newbie
Member#: 34368
Join Date: Mar 2003
Location: pasadena, CA
|
my boy likes camo so i ordered the gc8 silicone hose kit since he pointed it out. wasted $65! more pics. 20171013_221107 by meme meme, on Flickr shifter that came with the car. i replaced it with a ebay shifter. seems to work great. came with a few extra things to make it work with other cars i guess. they give you 2 plastic washers that take up the space and make it a really solid shifter. over all i really like it and it was only $22. i think. 20171013_221144 by meme meme, on Flickr 20171013_221158 by meme meme, on Flickr 20171013_221322 by meme meme, on Flickr i got a single pillar gauge pod for my innovate wideband PSB-1 power safe. brand is glow shift; something like that. says its for an impreza; but the bottom part that should beclosed off when mounted is not. so all the wires can be seen when looking through the windshield. autometer has one for the impreza so ill give that a try later. 20171013_225536 by meme meme, on Flickr so last night i got all the pieces for the clutch system. new master and slave, m10x1.0 banjo to -3an m10x1.0 straight to -3an 1ft steelbraided lineteflon cover -3an russell speed bleeder m7x1.0 20171014_165052 by meme meme, on Flickr 20171014_170531 by meme meme, on Flickr i did a bench bleed holding the slave higher then the master and got all the bubbles out. i still need to cut the damper off the bracket to be able to mount the slave. the bolt bottoms out with a few MM left. waiting for the iwire harness, i got to installing the innovate psb-1 sensors. loomed them up and will put it into the iwire harness so i dont have to cut any holes or poke any groumets. only the wideband sensor will be a problem, since its so thick. 20171015_013135 by meme meme, on Flickr 20171015_013412 by meme meme, on Flickr next is getting a fitting for the radiator that i tapped. after that i really cant do anything else until the iwire harness is done. without the harness i cant put the heater core back or the heater hoses. oh forgot about fluids. ill work on that this week. engine, trans and diff oil. |
10-23-2017, 12:39 AM | #23 |
Scooby Newbie
Member#: 34368
Join Date: Mar 2003
Location: pasadena, CA
|
been a lazy week! not many parts coming in now; last main thing is the iwire harness. without that i cant get heater hoses, cant put the intercooler on, cant run the innovate psb-1 harness, etc. basicly im stuck and kind of lazy and not much steam as when i started. hopefully i would get my harness soon so i could put the interior in and put coolant in.
i still have to tighten all the driveshaft bolts, install the heat shields for the drive shaft, cut the hangers off the GD exhaust and reweld them. started on the power steering mount. i made a simple 90deg bracket to mount to the original evac canister on the front frame rail. change things up a bit. hope to get back in the groove to finish the coupe. over the weekend i took a trip to berdoo canyon with my friend and a bunch of jeepers. one hell of a bumpy and rough ride. they drove really fast. i usually go pretty slow and enjoy the views. 2017-10-22_09-17-12 by meme meme, on Flickr 2017-10-22_09-29-01 by meme meme, on Flickr 2017-10-22_09-29-55 by meme meme, on Flickr my boys watching jeeps drive and slide down a hill hopefully i can get other things ready before the harness is done. got to get that motivation back. |
10-23-2017, 01:25 AM | #24 |
Scooby Specialist
Member#: 333468
Join Date: Sep 2012
Chapter/Region:
RMIC
Location: SLC, UT
Vehicle:93 SS - 06 OB XT 03 WRB GD 205/22T 20G-XT |
Keep going!!!
|
10-30-2017, 01:17 AM | #25 |
Scooby Newbie
Member#: 34368
Join Date: Mar 2003
Location: pasadena, CA
|
last few weeks been slow again. but great news, iwire harness is done. ill be picking it up on tuesday. so this weekend i got to work tightening all the bolts under the car and getting all the fluids in. only thing is the coolant that is not in yet.
today i spent some time cleaning my hvac system. so much dust, dirt, and leaves everywhere. in the pics; that is about half of what was left before taking it apart. i should have all this clean by tuesday. but i wont have time to get the harness back in till next weekend. 20171029_215059 by meme meme, on Flickr 20171029_215051 by meme meme, on Flickr i got a cheap ebay exhasut for the wrx thinking it will fit. the muffler is tilted pretty bad. the mid pipe cant be bolted in because it is up against the driveshaft support and heat shield. so ill have to chop the midpipe and do some pie cuts to angle it down about half an inch. then chop the pipe off the muffler and reangle it. i bought head light kit from ebay doesnt fit as good as i thought. the corner lights are sunken in a bit and looks funny. 20171028_161720 by meme meme, on Flickr so ive been spending my money on ammo lately and put off a few items for the impreza. i was going to get cobb ap, crawford catch can, RS bumper and lights etc.. i think i really need the cobb because im not sure if the car was tuned before. it seems light it was moddified before and parts removed when sold. |
Thread Tools | |
Display Modes | |
|
|