Need some help with part numbers.

Dragon7606 · 04-29-2003, 11:38 PM

Hey guys can some one help me with the part numbers for the 22b rear brakes. I have the calipers, dust shields, and rotors. But the rest of the kit that was sent are not the right parts. The pad-pins (PN#26628FA000) fit fine in the caliper but the slide pin-clips that were given (PN#26231FE040) dont fit in the pad-pin holes to keep them on the caliper. They are larger than the holes. The anti-rattle clips (PN#26632FE001), well lets just say I'm not sure how they go on correctly.

Please help me with the correct part numbers. Mainly the pad-pins and slide pin-clips. Also anyone know how to install the rear anti-rattle clips correctly? Thanks for the help.

Mike

* Registered users of the site do not see these ads.

STi-Nismo Dood · 04-30-2003, 04:49 AM

those part numbers that you are looking for are JDM numbers and they won't cross reference with the USDM database... hope youre ordering this from Japan... I have a set and when I received it, the damn vendor rubbed out the P#s. www.rallispec.com was the vendor... maybe they can help you.

subysouth · 04-30-2003, 09:35 AM

Where did you source youre parts if I might ask? Its odd to me that the pin clips would be there but the wrong size. I mean there cant be that many different typres of 2pot pin clips running around. The calipers are red correct and they were purchased new?

I'm wondering if you got some Nissan parts mixed in there. Many of the Nissan parts are interchangeable, but some may not be.

ss

I see if I can dig up the PNs.

Dragon7606 · 04-30-2003, 10:53 AM

The set I have are black. They were purchased from Renick Motorsports a Suby car dealer in southern Cali. The calipers are new and most of the part numbers are still on all of the parts. They have been helpful and supplied me with the clips and anti-rattle springs after I told them they were missing.

Mike

Dragon7606 · 04-30-2003, 02:08 PM

STi-Nismo Dood thanks. I emailed Rallispec and they told me the part numbers for the clips were for the Sti Brembo rear calipers and that is why I'm having trouble.

Thanks
Mike A.

STi-Nismo Dood · 04-30-2003, 04:28 PM

no problem man, have fun with your new brakes.

Today is day '4' riding on my 2-pots, and guess what? The silver paint on the rotors barely just rubbed off hahah... I think my front 4-pot is getting all the action.

-Vic

04-29-2003, 11:38 PM	#1
Dragon7606 Scooby Newbie Member#: 11082 Join Date: Oct 2001 Location: San Mateo, CA Vehicle: 2002 Impreza STI V7 Silver	Need some help with part numbers. Hey guys can some one help me with the part numbers for the 22b rear brakes. I have the calipers, dust shields, and rotors. But the rest of the kit that was sent are not the right parts. The pad-pins (PN#26628FA000) fit fine in the caliper but the slide pin-clips that were given (PN#26231FE040) dont fit in the pad-pin holes to keep them on the caliper. They are larger than the holes. The anti-rattle clips (PN#26632FE001), well lets just say I'm not sure how they go on correctly. Please help me with the correct part numbers. Mainly the pad-pins and slide pin-clips. Also anyone know how to install the rear anti-rattle clips correctly? Thanks for the help. Mike * Registered users of the site do not see these ads.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need help with part number.	skatevolcom06	Newbies & FAQs	3	02-09-2010 01:32 PM
needs some help with a part #	H-Dtech	Interior & Exterior Modification	7	10-22-2008 12:48 AM
Need Help with Part Numbers and Getting Parts...	Xscreamer	Normally Aspirated Powertrain	1	02-26-2001 10:48 AM

04-30-2003, 04:49 AM	#2
STi-Nismo Dood Scooby Specialist Member#: 4149 Join Date: Feb 2001 Chapter/Region: SCIC Location: Frisco/Diego/LosAngeles Vehicle: MY93 Impreza 6MT GC8.6 Aspen White	those part numbers that you are looking for are JDM numbers and they won't cross reference with the USDM database... hope youre ordering this from Japan... I have a set and when I received it, the damn vendor rubbed out the P#s. www.rallispec.com was the vendor... maybe they can help you.

04-30-2003, 09:35 AM	#3
subysouth Scooby Guru Member#: 5039 Join Date: Mar 2001 Chapter/Region: South East Location: Ocean Springs, MS Vehicle: 2007 Outback XT Grey 5-speed (sold)	Where did you source youre parts if I might ask? Its odd to me that the pin clips would be there but the wrong size. I mean there cant be that many different typres of 2pot pin clips running around. The calipers are red correct and they were purchased new? I'm wondering if you got some Nissan parts mixed in there. Many of the Nissan parts are interchangeable, but some may not be. ss I see if I can dig up the PNs.

04-30-2003, 10:53 AM	#4
Dragon7606 Scooby Newbie Member#: 11082 Join Date: Oct 2001 Location: San Mateo, CA Vehicle: 2002 Impreza STI V7 Silver	The set I have are black. They were purchased from Renick Motorsports a Suby car dealer in southern Cali. The calipers are new and most of the part numbers are still on all of the parts. They have been helpful and supplied me with the clips and anti-rattle springs after I told them they were missing. Mike

04-30-2003, 02:08 PM	#5
Dragon7606 Scooby Newbie Member#: 11082 Join Date: Oct 2001 Location: San Mateo, CA Vehicle: 2002 Impreza STI V7 Silver	STi-Nismo Dood thanks. I emailed Rallispec and they told me the part numbers for the clips were for the Sti Brembo rear calipers and that is why I'm having trouble. Thanks Mike A.

04-30-2003, 04:28 PM	#6
STi-Nismo Dood Scooby Specialist Member#: 4149 Join Date: Feb 2001 Chapter/Region: SCIC Location: Frisco/Diego/LosAngeles Vehicle: MY93 Impreza 6MT GC8.6 Aspen White	no problem man, have fun with your new brakes. Today is day '4' riding on my 2-pots, and guess what? The silver paint on the rotors barely just rubbed off hahah... I think my front 4-pot is getting all the action. -Vic