Let's see pics of TXS FMIC with intake other than TXS

Cannonbolt · 11-12-2008, 05:54 PM

Like the thread says, if you've got a TXS FMIC with an intake other than the supplied TXS short ram, tell us what it is and post a picture. I've heard a lot of talk about which intakes fit and the talk has gone both ways over the same intake! So let's see picture proof!

* Registered users of the site do not see these ads.

valin · 11-14-2008, 10:13 PM

I agree. I would like to see this as well.

Cannonbolt · 11-15-2008, 01:00 PM

Surely someone has pictures!!

pDubs · 11-15-2008, 02:01 PM

Turboxs knock off (ssac) but you get the idea. The only visible difference is the weld, from what I can see.

Buster05 · 11-15-2008, 02:48 PM

Same FMIC, but with Perrin Shortram and Inlet

hatallas · 11-15-2008, 03:24 PM

hey do you know if your inlett will fit over a 16G?

good stuff guys btw!

Buster05 · 11-15-2008, 04:39 PM

Quote:

Originally Posted by hatallas

hey do you know if your inlett will fit over a 16G?

good stuff guys btw!

I had to get one for my 16g. I have a Bullseye 16g and the lip to the compressor is so small, its actually skinnier than the clamp holding the inlet on.

vtecTHIS · 11-15-2008, 07:13 PM

i got a typhoon on mine... i'll hold off on posting pics unless you want it to continue as a ssac thread

Cannonbolt · 11-15-2008, 08:15 PM

Quote:

Originally Posted by pDubs

Turboxs knock off (ssac) but you get the idea. The only visible difference is the weld, from what I can see.

What intake is this?

Cannonbolt · 11-15-2008, 08:16 PM

Quote:

Originally Posted by vtecTHIS

i got a typhoon on mine... i'll hold off on posting pics unless you want it to continue as a ssac thread

As far as I can tell, the SSAC is just a copy of the TXS FMIC. I'd like to see these pics please/

wRxbeater11 · 11-15-2008, 08:24 PM

Custom "short ram" for my setup =]

Melo

vtecTHIS · 11-15-2008, 09:22 PM

old pic, my bay looks way different now,but you get the idea. fits perfect

JDiMpreza · 11-15-2008, 09:28 PM

Some clean engine bays in this thread... I gotta fix mine up.

vtecTHIS · 11-15-2008, 09:34 PM

mine looks like **** in that pic

vipernj · 11-15-2008, 10:45 PM

Stock hose and pipe that came with ssac kit.. I had to persuade the filter a little to fit

hatallas · 11-16-2008, 10:11 AM

do you loose ur fog lights in a bug with this kit?

Cannonbolt · 11-16-2008, 08:01 PM

Quote:

Originally Posted by vipernj

Stock hose and pipe that came with ssac kit.. I had to persuade the filter a little to fit

Haha, we can tell. Classic.

Cannonbolt · 11-16-2008, 08:04 PM

Quote:

Originally Posted by vtecTHIS

old pic, my bay looks way different now,but you get the idea. fits perfect

Hmm...obviously the heat shield had to go, but you're not getting any filter/hood or filter/IC pipe contact?

pDubs · 11-16-2008, 08:21 PM

Quote:

Originally Posted by Cannonbolt

What intake is this?

SPT..

PSI_XTC · 11-16-2008, 09:47 PM

Also an SSAC FMIC, but I'm using an Airaid filter from the PT Cruiser ram air kit that I had on my old car (yes, a PT Cruiser). This filter is more of an oval shape so it doesn't hit the hood when I close it.

vtecTHIS · 11-16-2008, 10:28 PM

Quote:

Originally Posted by Cannonbolt

Hmm...obviously the heat shield had to go, but you're not getting any filter/hood or filter/IC pipe contact?

it looks like it would. but none. i have ducting to the intake cone now as well.. i'll try to get a more current pic... but i've had that intake/fmic set up for over a year now, no problems

11-12-2008, 05:54 PM	#1
Cannonbolt Scooby Specialist Member#: 52509 Join Date: Jan 2004 Chapter/Region: South East Location: Greenville, SC Vehicle: 2004 WRX STi	Let's see pics of TXS FMIC with intake other than TXS Like the thread says, if you've got a TXS FMIC with an intake other than the supplied TXS short ram, tell us what it is and post a picture. I've heard a lot of talk about which intakes fit and the talk has gone both ways over the same intake! So let's see picture proof! * Registered users of the site do not see these ads.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Lets see Pics of your fmic!!!!!	boostinscooby	Member's Car Gallery	3	10-10-2005 09:37 AM
Can I see pics of 04 + Suby's with cleared headlights	subaru-noob	Member's Car Gallery	11	04-06-2005 02:42 PM
Can I see pics of your cars with 5zigen fighters?	jackacc	Member's Car Gallery	2	03-01-2005 08:18 AM
Pics of Imprezas with wings other than stock?	AsherK	Interior & Exterior Modification	7	03-07-2002 03:32 AM
May I please see pics of your cars with 22B wings?	Andrew	General Forum Archive	23	10-23-2000 07:06 AM

11-14-2008, 10:13 PM	#2
valin Scooby Newbie Member#: 194034 Join Date: Nov 2008 Location: Sudbury, Ontario Vehicle: 2008 WRX Premium Dark Grey Metallic	I agree. I would like to see this as well.

11-15-2008, 01:00 PM	#3
Cannonbolt Scooby Specialist Member#: 52509 Join Date: Jan 2004 Chapter/Region: South East Location: Greenville, SC Vehicle: 2004 WRX STi	Surely someone has pictures!!

11-15-2008, 02:01 PM	#4
pDubs Scooby Specialist Member#: 149317 Join Date: May 2007 Chapter/Region: MAIC Location: Aldie, VA Vehicle: '95 BMW M3 (E36) Hellrot	Turboxs knock off (ssac) but you get the idea. The only visible difference is the weld, from what I can see.

11-15-2008, 02:48 PM	#5
Buster05 Scooby Newbie Member#: 107323 Join Date: Feb 2006 Chapter/Region: Tri-State Vehicle: 2005 Impreza WRX 16g Crystal Gray Metallic	Same FMIC, but with Perrin Shortram and Inlet

11-15-2008, 03:24 PM	#6
hatallas Scooby Newbie Member#: 163048 Join Date: Oct 2007	hey do you know if your inlett will fit over a 16G? good stuff guys btw!

11-15-2008, 07:13 PM	#8
vtecTHIS Scooby Guru Member#: 48048 Join Date: Nov 2003 Chapter/Region: International Vehicle: .	i got a typhoon on mine... i'll hold off on posting pics unless you want it to continue as a ssac thread

11-15-2008, 08:24 PM	#11
wRxbeater11 Scooby Specialist Member#: 12682 Join Date: Nov 2001 Chapter/Region: Tri-State Location: Middle East, Asia	Custom "short ram" for my setup =] Melo

11-15-2008, 09:22 PM	#12
vtecTHIS Scooby Guru Member#: 48048 Join Date: Nov 2003 Chapter/Region: International Vehicle: .	old pic, my bay looks way different now,but you get the idea. fits perfect

11-15-2008, 09:28 PM	#13
JDiMpreza Scooby Specialist Member#: 18707 Join Date: May 2002 Chapter/Region: NWIC Location: Seattle, WA Vehicle: 2002 WRX Wagon Platinum Silver Metallic	Some clean engine bays in this thread... I gotta fix mine up.

11-15-2008, 09:34 PM	#14
vtecTHIS Scooby Guru Member#: 48048 Join Date: Nov 2003 Chapter/Region: International Vehicle: .	mine looks like **** in that pic

11-15-2008, 10:45 PM	#15
vipernj Scooby Specialist Member#: 86854 Join Date: May 2005 Chapter/Region: Tri-State Location: Rockland, NY Vehicle: 2004 fx35 02 Z06 Beryllium, Millenium Yell	Stock hose and pipe that came with ssac kit.. I had to persuade the filter a little to fit

11-16-2008, 10:11 AM	#16
hatallas Scooby Newbie Member#: 163048 Join Date: Oct 2007	do you loose ur fog lights in a bug with this kit?

11-16-2008, 09:47 PM	#20
PSI_XTC Scooby Specialist Member#: 123386 Join Date: Aug 2006 Chapter/Region: MWSOC Location: Independence, KY Vehicle: '12 IS-F '08 Saab 9-3 TurboX	Also an SSAC FMIC, but I'm using an Airaid filter from the PT Cruiser ram air kit that I had on my old car (yes, a PT Cruiser). This filter is more of an oval shape so it doesn't hit the hood when I close it.