|01-06-2007, 12:14 AM||#1|
Join Date: Oct 2005
Location: Back In NYVehicle:
Where to put the cans?
Just got my catch cans in the mail. From the research I have done I came to the conclusion that installing 2 is the "correct way".
Taken from the FAQ
Disconnect the hose which runs between the PCV valve and the turbo inlet pipe. Run a line from the PCV to the catch can, and another line from the catch can to the turbo inlet hose.
Disconnect the hose running between the crank case breather lines and the turbo inlet pipe. Run new hose between the breather line and the catch can and another hose between the can and the inlet pipe.
Doesn't seem so complicated except there is no room for 2 cans in my engine bay and I don't know what hoses are what. Is there anyone who has 2 cans installed on their car? Got any pics?
Seems like there is room for one by the passenger side wheel well but where shoud I put the other?
* Registered users of the site do not see these ads.
|Thread||Thread Starter||Forum||Replies||Last Post|
|where to put the EGT bung on the header?||Drink||Factory 2.0L Turbo Powertrain (EJ Series Factory 2.0L Turbo)||17||07-08-2006 06:28 AM|
|Where to put the gauges??||TonyWRX||Interior & Exterior Modification||10||10-28-2002 10:38 PM|
|Where to put the ballast for HID's on a GC8?||FatCatTurbo||Interior & Exterior Modification||6||06-02-2002 10:41 AM|
|Re: Where to put the compact spare??||jay25RS||Brakes, Steering & Suspension||5||10-14-2001 11:16 PM|
|Where to put the siren?||Onederer||Car Audio, Video & Security||4||09-07-2001 07:36 PM|