|
|
|
|
Thread Tools | Display Modes |
04-08-2019, 05:54 PM | #1 |
Scooby Guru
Member Sales Rating: (81)
Member#: 107618
Join Date: Feb 2006
Chapter/Region:
Tri-State
Location: NY
Vehicle:06 GG WRX / 09 FXT @florencedestinedfxt |
06 WRX parts; Killer B pickup, TIC Bushings, WL RSB & bushings, Grimmspeed Exhaust
It was time to move to a new sale thread - click here
Scroll past the list for pictures Various aftermarket and oem parts here. Full listing followed by all the pictures. All OEM parts fit a 2006 WRX unless otherwise listed. If there is no price next to the part, then let me know what your offer is. I would like to sell locally, but if you are willing to pay for shipping, then I will ship. I can meet you anywhere in or near Queens and Nassau County. Thanks for looking. Aftermarket Engine 1) Go Fast Bits Underdrive Pulley Kit, silver, used - $240 2) Samco Upper and Lower Radiator hoses, black, used - $100 Brakes & Suspension 1) New GD WRX Superpro 22mm rear sway bar RC0038RZ-22 as well as Superpro WRX rear endlinks TRC2925 - $250 for both (essentially free endlinks) 2) GD STI Front Lower Control Arms - 2 complete sets of 04-06 STI - 1 other complete set of 04-06 STI but each arm needs one of the two threaded holes for mounting the black pin repaired - $40 - 1 passenger-side 07 STI / 06 WRX sedan / JDM Forester STI / STI catalog (eBay has matching arm, PM or post for details) - bushings available: GC and GD Whiteline, oem front, used Perrin PSRS (ALK) with new hardware 3) 05-07 Rear Lateral Links - 3ish sets - all have 1 or 2 bushings with seized bolts - therefore must be purchased with any of the aftermarket bushings - bushings available: Whiteline, Superpro and Turn in Concepts Drivetrain Verus Engineering Forged Clutch Fork & Pivot Fork - Part # A0163A Pivot - Part # A0068A New, never used fits multiple models, predominantly 06+ WRX, some Foresters, LGTs, Bajas and Outbacks. Please check fitment. $170 shipped and PayPal'd in the U.S. will ship overseas as long as you cover additional shipping costs and PayPal fees Accessories Brand New Lisle T-70 Torx Bit for Tranny Drain Plug, Made in USA Interior 09-14 WRX Front Seats These have the oem heated element in them. Passenger seat was brought to an upholstery shop to have the seat portion replaced. Previous owner left some sort of iron-like hard stain on it so I spared no expense to get it fixed. I knew I couldn't stand it. Other than that, they are in fantastic shape. Had plans to install these in my 09 Forester but I decided to go with something else. Looking to do a local sale in Queens or Long Island. I can also make a trip if it makes sense. I can also ship but obviously you know it's not going to be cheap. $400 for both. Price is negotiable but I'm already eating like $150 at this price. Tons of other GH/GR suspension stuff. Let me know so we can work a better deal. My iTrader rating is all positives going back a decade. Wheels & Tires other non-06 WRX parts 1) 08-10 WRX/STI aluminum front Lower Control Arms - Whiteline front bushing, new, Part # W0508 - Whiteline ALK rear bushing, new, Part # KCA334 2) Superpro rear bushing, Duroball-type, new, fits 11+ STI, 15+ WRX Part # DURO3738K 3) Eibach Swaybars, 08-14 WRX/STI, 09-13 Forester, Part #7718.320 $360 4) Eibach Lowering Springs, 11-14 STI, Part # 7723.140 $140 5) 2008+ GR STI power steering pump, used - $160 6) SPC Rear Lower Control Arms 67660, used for 7K miles - $170 - will include new toe arm offset bushings 7) Swift Lowering Springs, 09-13 Forester Part # 4F908. $300 shipped 8) 08-14 STI steering joints, fits 08-14 WRX and 09-13 Foresters OEM parts - 06 WRX Suspension 1) late-GD lateral links, aluminum alloy front pair, steel rear pair $100***check out posts #6 to 11 below*** 2) front knuckles/spindles/uprights, 60K miles $200 for the set or $125 each Engine fuel pump and misc. parts from upgrade kit Accessories & Body 1) front bumper beam 2) rear bumper beam 3) horns 4) alternator cover Drivetrain 1) set: 5-speed Shifter, F&R stay bushings, lever pivot sleeve and bushings 2) Crossmember Bushings 3) Rear differential bushings Go Fast Bits Underdrive Pulley Kit, silver Samco Radiator Hoses
* Registered users of the site do not see these ads.
Last edited by REX_WGN; 05-26-2022 at 11:47 AM. Reason: changes |
04-15-2019, 11:52 AM | #6 |
Scooby Guru
Member Sales Rating: (81)
Member#: 107618
Join Date: Feb 2006
Chapter/Region:
Tri-State
Location: NY
Vehicle:06 GG WRX / 09 FXT @florencedestinedfxt |
This first post is about how I'd like to sell the links and bushings as well as all the details to make these transactions the easiest, most effective for you as the buyer / installer.
--------------------------- 1) Pick which bushings you want 2) Add to WRX Lateral Links (Front Aluminum version) 3) Pick out what hardware you want I will install the bushings into the lateral links for you, I have a tub of Energy Suspension bushing grease. The ends of the links will be wrapped up before packaging them for shipping. I can also provide some extra hardware so you don't run into any "oh ****" moments during installation. The long bolt that goes through the knuckle and outer ends of the lateral links are notorious for seizing to any of the bushing metal sleeves. I highly recommend you at least get that from me if you don't have any extra on hand already. --------------------------- Buy-Back Program Once you're done installing your new links and bushings , you can reach out to me and I'd be more than happy to buy your used links. Keep in mind I am only interested in the STI links or the WRX ones where the front pair are aluminum. I am also more than happy to buy back the hardware. --------------------------- Prices do not include shipping. Please click here for my NASIOC iTrader seller/buyer rating - all positive reviews going back over a decade with about 10 reviews in the last 2 months. Message me with any specific questions or further details. If you think it may pertain to others, please post here and I will answer here. Post #7 will list the lateral link bushings offered. Post #8 will show the WRX lateral links. #9 will list the available hardware. #10 will show the work I've done to clean up the links. #11 will show my process for the bushings installation. Thanks for reading to this point. Scroll down for the pictures. Last edited by REX_WGN; 07-13-2020 at 06:14 PM. |
04-15-2019, 12:27 PM | #7 |
Scooby Guru
Member Sales Rating: (81)
Member#: 107618
Join Date: Feb 2006
Chapter/Region:
Tri-State
Location: NY
Vehicle:06 GG WRX / 09 FXT @florencedestinedfxt |
Bushings to pair with Lateral Links - PM for availability
- fits all Impreza models including WRX and STI (GD and GC platforms) from 93 to 2007 - also fits Forester Models from 97 to 2008 Group N Hardened Rubber Superpro Polyurethane SPF1463K $100 Whiteline Lateral Link Bushings W61382A $90 TurninConcepts Graphite-Impregnated Polyurethane Last edited by REX_WGN; 03-03-2021 at 12:19 PM. |
04-15-2019, 06:25 PM | #8 |
Scooby Guru
Member Sales Rating: (81)
Member#: 107618
Join Date: Feb 2006
Chapter/Region:
Tri-State
Location: NY
Vehicle:06 GG WRX / 09 FXT @florencedestinedfxt |
Lateral Links - PM for availability
STI sets available - $220 each 05-07 WRX - $100 STI Lateral Links - $220 WRX Set #1 - $100 Last edited by REX_WGN; 03-03-2021 at 12:14 PM. |
04-16-2019, 09:58 AM | #9 |
Scooby Guru
Member Sales Rating: (81)
Member#: 107618
Join Date: Feb 2006
Chapter/Region:
Tri-State
Location: NY
Vehicle:06 GG WRX / 09 FXT @florencedestinedfxt |
Hardware available to purchase
Let me know which ones you want and we can work out a price. I'm not going to charge much. Will offer to buy back. This is what I have left: 1 x 20560aa011 inner rear washer 1 x 20560aa030 inner front washer 1 x 20550AA010 outer nut 3 x 900335056 outer washer 1 x 20540aa001 long bolt In addition, I have the following: 2 x long bolts, each with 1 washer, used 2 x bolts and nuts, for the endlink mounting point, wrx steel links, used Last edited by REX_WGN; 07-13-2020 at 06:22 PM. |
04-18-2019, 12:02 PM | #10 |
Scooby Guru
Member Sales Rating: (81)
Member#: 107618
Join Date: Feb 2006
Chapter/Region:
Tri-State
Location: NY
Vehicle:06 GG WRX / 09 FXT @florencedestinedfxt |
Here's some of the work I put in to ensure the links were in good condition to sell, especially the WRX steel rears.
1) Initial cleaning of the links with a green scuff pad sponge and a solution of simple green and water 2) steel links: chipped off all flaking paint and rust with a flat head 3) steel links: filed down all rust that couldn't be easily chipped off and also filed the inner bores of the bushing housings to make sure they were smooth 4) aluminum links: deburred and filed down all sharp edges 5) washed the links again 6) steel links: sprayed 4 coats of VHT rust converter on the spots that needed them 7) steel links: sprayed them with 3 coats of Rustoleum Universal flat black paint Next 2 pictures are after finishing the steel links with VHT rust converter This is after finishing with the 3 coats of topcoat Up close shot of the finished product.Notice the smoothness of the outer edge and the inner bore I wish I had pictures of the links when I first got them so I could really show the work I've put in. I was just too busy and in the moment cleaning them up that I forgot to take pictures as I went through the process. Last edited by REX_WGN; 06-25-2020 at 12:13 AM. |
04-19-2019, 10:46 AM | #11 |
Scooby Guru
Member Sales Rating: (81)
Member#: 107618
Join Date: Feb 2006
Chapter/Region:
Tri-State
Location: NY
Vehicle:06 GG WRX / 09 FXT @florencedestinedfxt |
Here are some pictures of the installation work:
Inner bore of lateral link bushing housings were greased first followed by the inner faces of the bushings Once both split bushings are installed in each housing, the inner bore for the crush sleeve was greased. Then the outer faces of the bushings were lubed with a thin coat of grease. In hindsight, should've did this part last. Used a vice bench to install the crush tubes. Here's a WRX set with Superpro Bushings greased and installed Last edited by REX_WGN; 09-29-2020 at 01:08 AM. |
04-22-2019, 04:12 PM | #12 |
Scooby Guru
Member Sales Rating: (81)
Member#: 107618
Join Date: Feb 2006
Chapter/Region:
Tri-State
Location: NY
Vehicle:06 GG WRX / 09 FXT @florencedestinedfxt |
Sold Parts Archive List
Aftermarket
Brakes & Suspension TurninConcepts Front Trailing Arm Bushings, Race version, new - $65 SOLD! TurninConcepts Rear Trailing Arm Bushings, Race version, new - $50 SOLD! Whiteline Front Control Arm - Lower Inner Rear Bushings, new W53353 - $90 SOLD! Whiteline Sway Bar Bushings, grease-free, 22mm, brand new W0406-22G SOLD! Brand New STi Group N Rear Suspension Crossmember Bushings, set of 4 solid metal (rare, discontinued) - $155 SOLD! Brand New TurninConcepts Front Trailing Arm Bushings, Enthusiast version (rare, discontinued) - $90 w/oem Trailing Arms SOLD! Whiteline Quick Release Kit, KSB790 - $15 SOLD! Kartboy Solid Rear Endlinks (KB-017-WRX-R) WITH Brand New Hardware and an extra set of replacement bushings - $110 SOLD! Hawk HPS 5.0 rear brake pads (HB179B.630), 2,291 miles of street driving (no auto-X/track) - $50 SOLD! Whiteline Rear Vehicle Essentials Kit - WEK081 - 08-14 WRX/STI - $280 SPC Camber Bolts, adjust up to +/- 1.75deg, #81260, new - $20 Whiteline Lateral Link Bushings, used $40 TurninConcepts Lateral Link Bushings - race version, Shore 95A medical grade urethane - fits all Imprezas 97-07 as well as the FXTs that have 4 rear lateral links - $150 Superpro Front Trailing Arm Bushings - $50 8/26/20 Superpro Rear Trailing Arm Bushings - 8/30/20 TIC Front Trailing Arm Bushings - 9/21/20 TIC Rear Trailing Arm Bushings - 9/21/20 WRX Lateral Links - 9/21 Superpro LL bushings - 9/21 07 STI front LCAs - 9/21 04-06 STI front Lower Control Arms - 9/30 Whiteline FLCA bushings - 9/30 MSI Trailing Arms Motorsports MSISUB02-28-015 11/29/2020 2) Brand New Perrin Transmission Mount, Part # PSP-DRV-150 - $220 - for both 5-speed and 6-speed transmissions. will not fit autos or CVTs - fits: 04-20 STI, 02-20 WRX, 93-19 Impreza, 04-11 FXT, 05-09 Legacy GT, 13-19 Crosstrek Whiteline Front Roll Center Adjustment Kit, used, Part # KCA313 - $200 - great shape, 4,300 miles - new cotter pins provided - 2 boots were nicked during uninstallation; I replaced all 4 boots with Whiteline Service Kit W0907 - will include an additional WL Dust Boot Service Kit W0907 ($30 value) Whiteline Rear Lateral Link Kit, new, part # KTA109 - $380 3/12/2021 Cusco Adjustable Trailing Arms, Part # 666 474 T - 3/18 Group N Trailing Arm Bushings - 3/18 MSI Trailing Arms, 1" Drop Correction MSISUB02-28-012 - 4/17/21 Superpro front TA bushings 4/17/21 08-14 WRX & STI Grillcraft Hood Scoop Mesh Grill Insert, black 4/23/21 Whiteline Rear Swaybar Mount 5/6/21 07 STI Rear Swaybar with bushings 5/7/21 STI LLs 5/7/21 Whiteline W61382A 5/7/21 Superpro Front Endlinks, 08-14 WRX/STI, Part # TRC4142 5/8/21 Kartboy Rear Endlinks, 08-14 WRX/ STI, Part # KB-017-08REAR 5/8/21 Subtle Solutions 1"-1.5" Lift Kit 6/12/21 KCA375 used 6/12/21 Drivetrain Group N Engine Mounts 8/26/2020 Kartboy Front and Rear shifter Bushings traded 10/6/2020 Beatrush Front Shifter Bushings 10/9/2020 Brand New STI JDM Group N Transmission Mount 6MT, part # ST410224S040 3/2/21 Group N Engine Mounts, new 3/2/21 TurninConcepts OG Transmission Crossmember Bushings, used <1K miles - $25 4/22/21 TurninConcepts Rear Diff Mount Bushings, race version, used <1K miles - $25 4/22/21 Kartboy Rear Subframe Outrigger Bushings, race version, used <1K miles - $25 4/22/21 Whiteline Steering Rack Bushings, new, KSR206 $55 4/22/21 Verus STI Billet High-Strength Steel Clutch Fork, Like-New - 4/27/21 Cobb Front & Rear Shifter Bushings, 5 speed, used - $40 - 12/2/21 Engine GrimmSpeed Turbo Heat Shield, original and brand new - $55 SOLD! Killer B Motorsport Ultimate Oil Pickup EJ25 $130 SOLD! Grimmspeed EWG Uppipe w/ dump tube, 38/40mm V-band - New SOLD! Port and Polished OEM Exhaust Manifolds - $120 local sale, $135 shipped SOLD! Perrin lightweight crank pulley, 63K miles - $65 SOLD! Cobb 3-Port Boost Control Solenoid #712750, new $100 shipped 7/31/2020 GrimmSpeed HiFlow Exhaust Manifold (EM) Crosspipe - Used 8/26/2020 - I will include 2 new Grimmspeed EM-to-Xpipe gaskets GrimmSpeed HiFlow Exhaust Manifold (EM) Crosspipe - New - with Thermal Ceramic Coating in black - I will include 2 new Grimmspeed EM-to-Xpipe gaskets Grimmspeed Electronic Boost Control Solenoid 3-Port - 08-20 STI 9/10/2020 IAG Radiator Stays, used pair, IAG-ACC-2502SL - $49 10/18/2020 - includes original SS hardware and grommets - fits 08-14 WRX STI Grimmspeed Used Uppipe Feb/2021 1) Killer B Motorsport Aluminum Oil Pan Package, new - $520 3/2021 Accessories Grimmspeed Alternator Cover & Radiator Shroud w/ Tool Tray 02-07 impreza/WRX/STI SOLD! 3/16" wheel spacers - $5 SOLD! Fumoto Drain Valve - $10 8/19/2020 08+ STI Power Steering Pump, new part # 34430FG040 - $300 9/8/20 Password JDM Dry Carbon Exhaust Shroud - 2/25/21 Defi Racer Boost Gauge, White, discontinued, new, Part # DF06503 - $150 3/22/21 Wheels & Tires ARP 100-7716 Wheel Stud Kit, 3 packs, new - 3/16/21 OEM parts - 06 WRX Wheels & Tires oem wheels $90 3/22/21 Suspension U-frame chassis brace SOLD! Trailing Arms with upgraded bushings - $90 SOLD! Lateral Links, set of 4, front aluminum ones $250** SOLD! steering wheel 7/24/2020 WRX Sedan Lateral Links, set of 4, front aluminum ones $100 Engine air pump SOLD! Accessories & Body Dead Pedal SOLD! Brand New Fog Light Switch (83001FE000) Brand New 2002-07 Impreza Rear Black Molded Rubber Floor Mats (J5010SS400) - $20 Drivetrain 5MT Shift Knob SOLD! steering joint - 11/2/2020 other oem parts Bugeye wagon Front and Rear Bumper Covers $80 each 05-07 STI Lateral Links, all 4 aluminum alloy late-GD lateral links $220 05-07 STI Lateral Links set #2 07 STi struts $200 8/29/2020 07 STI Rear Subframe 8/30/2020 08+ STI PS Pump 9/8/2020 08-21 STI shifter assembly - traded 3/23/21 set of 4 TPMS sensors, off of an 11-14 WRX, Model # SMD3MA4 - $100 3/23/21 2) Whiteline Roll Center Kit, KCA313, new 4) Turn in Concepts Front & Rear Trailing Arm Bushings 2) Group N 5MT Trans Mount, used <1K miles Last edited by REX_WGN; 12-02-2021 at 06:31 PM. |
Thread Tools | |
Display Modes | |
|
|