|04-01-2005, 10:37 PM||#1|
Join Date: May 2003
Location: Los AngelesVehicle:
2005 WRX Sedan (STX)
Crystal Grey -TeamBrew-
Maf Limitations (Ecutek/StreetTuner)
1. What is the maximum voltage that the 05 WRX MAF will read?
2. With a stock intake and default MAF Calibration, what would that max voltage equate to in terms of "Maximum Sensed Load"
I am asking, because I want to rescale the X axis of the ignition and Fuel Maps, and before I do that I would like to know what the top value on the x axis could possibly be and at the same time being usable.
* Registered users of the site do not see these ads.
|04-02-2005, 08:58 AM||#2|
Join Date: Feb 2003
Location: lincoln, riVehicle:
2003 GGA MBP
12.9 / 105+
in theory, 5vdc. it probably will never hit that though... so 4.99999v
remember that if you're counting on the maf sensor to be ACCURATE at the extreme of it's range, you're asking too much. if you are REALLY pulling that much air, then you ought to rescale the maf sensor PHYSICALLY via a larger than oem maf tube diameter.
|Thread||Thread Starter||Forum||Replies||Last Post|
|a few questions about opensource the stock maf limitations.....||RYNOMOTO||Open Source Reflashes||7||09-23-2009 01:35 AM|
|02 wrx and MAF limits||DemiSlayer||UTEC||4||01-21-2008 07:18 PM|
|MAF limit STis||Tea cups||Engine Management & Tuning||9||07-08-2006 05:14 PM|
|05 WRX MAF Calibration & Fuel Trim (Ecutek/StreetTuner)||buzz313th||Engine Management & Tuning||3||04-02-2005 05:55 PM|
|hitting the MAF limit...||sponaugle||Factory 2.0L Turbo Powertrain (EJ Series Factory 2.0L Turbo)||21||10-07-2003 01:57 PM|